首页 | 本学科首页   官方微博 | 高级检索  
检索        

微型变压吸附制氧研究
引用本文:卜令兵,刘应书.微型变压吸附制氧研究[J].医疗卫生装备,2006,27(1):14-16.
作者姓名:卜令兵  刘应书
作者单位:北京科技大学机械工程学院气体分离工程研究所,北京市,100083
摘    要:对微型变压吸附制氧的工艺流程、能耗、噪声以及控制系统进行了深入研究。目前微型变压吸附制氧有无均压、进气均压、出气均压3种工艺流程,其中有均压流程能耗较低、制氧效果较好。由于技术水平等原因,国内各厂家生产的微型变压吸附制氧机在能耗噪声等方面与国外产品相比存在一定差距,需要进一步提高技术水平。控制系统决定着整机的性能,因此,研究性能稳定的控制系统,对微型变压吸附制氧尤其重要。

关 键 词:变压吸附  制氧  工艺  能耗  噪声
文章编号:1003-8868(2006)01-0014-03
收稿时间:2005-09-12
修稿时间:2006-01-06

Study on miniature pressure swing adsorption oxygen generation
BU Ling-bing,LIU Ying-shu.Study on miniature pressure swing adsorption oxygen generation[J].Chinese Medical Equipment Journal,2006,27(1):14-16.
Authors:BU Ling-bing  LIU Ying-shu
Institution:Institute of Gas Separation Engineering, School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083
Abstract:In this paper, such aspects of miniature pressure swing adsorption (PSA) oxygen generation are studied as its technical processes, power consumption, noise and control system. Of the three technical processes of the one without pressure equation, the one with pressure equation at the inlet and the one with pressure equation at the outlet, the last one has a low power consumption and thus is effective. The power consumption and noise of domestic miniature PSA oxygen generator are higher than those of foreign ones. Being very important for miniature PSA oxygen generation, the control system has to be laid emphasis on.
Keywords:PSA  oxygen generation  technical process  power consumption  noise
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号