Synthesis and characterization of multiblock copolymers poly[poly(L-lactide)-block-polydimethylsiloxane]

The preparation of multiblock copolymers poly[poly(L -lactide)-block-polydimethylsiloxane] by polycondensation of bifunctional oligomers via hydrosilylation is described. The procedure consists first to synthesize the two bifunctional oligomers α,ω-disilyl-polydimethylsiloxane and α,ω-diallyl-poly(L -lactide). The former is prepared in one step by cationic polymerization of octamethylcyclotetrasiloxane in the presence of 1,1,3,3-tetramethyldisiloxane as end-blocker. Two steps are necessary to prepare α,ω-diallyl-poly(L -lactide). The first one is the polymerization of L-lactide initiated by the system ethylene glycol/tin 2-ethylhexanoate. In a second step, the hydroxyl end-groups of the resulting α,ω-dihydroxy-poly(L -lactide) are transformed, by reaction with allyl isocyanate, into terminal allylic functions. Different multiblock copolymers were prepared by hydrosilylation (catalyzed by hexachloroplatinic acid) using the same α,ω-diallyl-poly(L -lactide) (M?_n = 2000 g · mol ^?1) and various α,ω-disilyl-polydimethylsiloxanes (M?_n from 1 750 to 9 000 g · mol ^?1). The influence of parameters such as temperature, stoichiometry of reactive end-groups and catalyst concentration on the molecular weight of the copolymers was studied. High molecular weight copolymers were obtained (DP_n > 12 by SEC). In addition to the biodegradability of the lactic acid units, the immiscibility of the polydimethylsiloxane and poly(L -lactide) blocks imparts thermoplastic elastomer properties to these copolymers. The crystallinity of the poly(L -lactide) phase is dependent on the molecular weight of the polydimethylsiloxane blocks.