Evaluation of methylene lactone monomers in dental resins. |
| |
Authors: | J W Stansbury J M Antonucci |
| |
Institution: | Polymers Division, National Institute of Standards and Technology, Gaithersburg, MD. |
| |
Abstract: | alpha-Methylene-gamma-butyrolactone (MBL), which can be described as the cyclic analog of methyl methacrylate, exhibits greater reactivity in free radical polymerizations than conventional methacrylate monomers. Unfilled resin formulations composed of Bis-GMA/MBL or Bis-GMA/TEGDMA/MBL were light-cured. The effect of the more reactive methylene lactone monomer on mechanical properties and the degree of conversion of the polymers was examined. The infrared absorption bands for the carbon-carbon double bonds of MBL and the methacrylate monomers are well resolved and allow the conversion of each component to be calculated individually. The incorporation of a small amount of MBL (5 w/o) to Bis-GMA significantly increased the conversion; however, additional MBL (10 to 30 w/o) did not further increase the Bis-GMA conversion level. This appears to indicate an incompatibility between MBL and the bulky Bis-GMA monomer. Addition of 10 w/o MBL to Bis-GMA/TEGDMA (7:3) resulted in a cured resin with 71% methacrylate and 75% overall conversion efficiencies compared with the 57% conversion of the control formulation. The diametral tensile and the transverse strengths were approximately 10% greater for the MBL resin compared with the Bis-GMA/TEGDMA control; however, these differences were not statistically significant. The synthesis and polymerization of several substituted methylene lactones was also studied. |
| |
Keywords: | |
|
|