| Abstract: | Polyethersulfone (PES) has been recently adopted for membrane materials in applications such as ultrafiltration and haemodialysis. As a biomaterial, the factors which affect the blood compatibility of PES membranes include surface energetics, hydrophobicity, and surface morphology. Surface fluorination of materials has been found to create surfaces with improved blood compatibility and chemical stability. One novel approach to generating fluorinated polymer surfaces has included the use of fluorinated surface modifying macromolecules (SMMs). These macromolecules have been reported to establish fluorinated functional groups at surfaces of polymeric materials without significantly affecting the physical properties of the base polymer. However, to date there has been relatively little information published on the nature of the surface structure for PES materials containing these SMMs. In this study, synthesized SMMs with varying chemical compositions were characterized and blended with PES, and fabricated into flat sheet membranes. The bulk thermal transitions of PES materials were not significantly altered by the addition of 4 wt% SMMs. Contact angle data showed that the addition of SMMs in PES created more hydrophobic surfaces, accompanied by an increase in surface heterogeneity. X-ray photoelectron spectroscopy studies confirmed the presence of elemental fluorine at the surface. Through microscopy studies, it was shown that surface modification was achieved by the migration of SMM concentrated microdomains to the air-membrane interface. The generated microdomains (approximately 1-2 μm in diameter) are dispersed within the top 8 μm of the surface. The concentration of microdomains was gradually depleted from the surface to the bulk of the membrane. A schematic of the morphology for SMMs within the PES membrane surface was proposed. |
