首页 | 本学科首页   官方微博 | 高级检索  
     

瓷厂与锡矿及钨矿石英粉尘表面铝硅酸盐包裹的测定和分析
引用本文:陈镜琼,王海椒,陈卫红. 瓷厂与锡矿及钨矿石英粉尘表面铝硅酸盐包裹的测定和分析[J]. 中华劳动卫生职业病杂志, 2006, 24(9): 537-539
作者姓名:陈镜琼  王海椒  陈卫红
作者单位:1. 26505 美国摩根镇,美国国家职业安全卫生研究所
2. 华中科技大学同济医学院公共卫生学院劳动卫生与环境卫生学系环境与健康教育部重点实验室
摘    要:目的 探讨石英粉尘表面铝硅酸盐包裹的测定方法和包裹对粉尘致病作用的影响.方法 应用呼吸性粉尘采样器以2 L/min采集江西钨矿、瓷厂和广西锡矿粉尘,用扫描电镜-能散X线分光计(SEM-EDS)以5 keV和20 keV电压照射测定呼吸性粉尘颗粒中各元素成分的含量,计算不同电子伏特照射下粉尘颗粒中硅与铝的比值.结果 7个瓷厂、3个锡矿和3个钨矿的47个粉尘样本共计3 982个粉尘颗粒,瓷厂样本的89%(24/27)与锡矿样本的27%(3/11)和钨矿样本的56%(5/9)存在明确的铝硅酸盐包裹,与对照样本比较,差异有统计学意义(P<0.01).瓷厂粉尘颗粒的45%、锡矿的18%和钨矿的13%存在表面铝硅酸盐包裹.瓷厂粉尘与钨矿和锡矿粉尘表面铝硅酸盐含量的差异有统计学意义(P<0.01),高铝硅酸盐含量的粉尘颗粒在瓷厂、锡矿和钨矿样本中的比率分别为22%、7%和10%.结论 瓷厂工作场所粉尘颗粒表面夹杂铝硅酸盐含量高于钨矿和锡矿的粉尘,粉尘颗粒表面成分的分析对解释不同厂矿尘肺发病的差异有一定作用.

关 键 词:二氧化硅 铝硅酸盐 粉尘 矽肺
收稿时间:2005-12-09
修稿时间:2005-12-09

Determination and analysis of silica particles surface alumino-silicate occlusion
William E.Wallace,CHEN Jing-qiong,WANG Hai-jiao,CHEN Wei-hong. Determination and analysis of silica particles surface alumino-silicate occlusion[J]. Chinese journal of industrial hygiene and occupational diseases, 2006, 24(9): 537-539
Authors:William E.Wallace  CHEN Jing-qiong  WANG Hai-jiao  CHEN Wei-hong
Affiliation:US National Institute for Occupational Safety and Health, Morgantown , WV , 26505, US
Abstract:Objective To investigate the methods of determining aluminum silicate coated on the surface of silica particles and analyze the role of surface occlusion on development of silicosis.Methods Respirable dust samples were collected on filters using 2 L/min flow in tungsten mines and pottery factories of Jiangxi province,and tin mines of Guanxi province.Dust particles were analyzed by a multiple-voltage scanning electron microscopy-ener- gy dispersive X-ray spectroscopy(MVSEM-EDS)using 20 KeV and 5 KeV electron beam accelerating voltages. Changes in the silicon to aluminum X-ray line intensity ratio between the two voltages are compared particle by par- ticle.This provided an index that distinguishes a silica particle that was homogeneously aluminum-contaminated from a clay coated silica particle.Results The total of 3982 dust particles from 47 dust samples of seven pottery facto- ries,three tin mines and three tungsten mines were analyzed in this study.Significant difference of aluminum silicate coated on the surface of silica particle was shown between particles from pottery factories and tin mines.The average sample percentage of respirbale-sized silica particles alumino-silicate occlusion in the pottery factories(45%)was higher than that in the tin mines(18%)and tungsten mines(13%).Conclusion Higher percentages silica parti- cles alumino-silicate occlusion is observed in the pottery factories than that in metal mines.These surface analysis results help to understand differences in risk of silicosis when exposure is normalized to cumulative respirable sur- face silica dust.
Keywords:Silicon dioxide  Aluminum silica  Dust  Silicosis
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号