Influence of W Addition on Microstructure and Resistance to Brittle Cracking of TiB2 Coatings Deposited by DCMS |
| |
| Authors: | Edyta Chudzik-Poliszak,Ł ukasz Cieniek,Tomasz Moskalewicz,Kazimierz Kowalski,Agnieszka Kopia,Jerzy Smolik |
| |
| Affiliation: | 1.Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, 30-059 Krakow, Poland; (Ł.C.); (T.M.); (K.K.); (A.K.);2.Łukasiewicz Research Networks—Institute for Sustainable Technology, 6/10 Pułaskiego St., 26-600 Radom, Poland; |
| |
| Abstract: | The aim of this work was to determine the influence of the tungsten addition to TiB2 coatings on their microstructure and brittle cracking resistance. Four coatings of different compositions (0, 7, 15, and 20 at.% of W) were deposited by magnetron sputtering from TiB2 and W targets. The coatings were investigated by the following methods: X-ray diffraction (XRD), transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). All coatings had a homogeneous columnar structure with decreasing column width as the tungsten content increased. XRD and XPS analysis showed the presence of TiB2 and nonstoichiometric TiBx phases with an excess or deficiency of boron depending on composition. The crystalline size decreased from 27 nm to 10 nm with increasing W content. The brittle cracking resistance improved with increasing content of TiBx phase with deficiency of B and decreasing crystalline size. |
| |
| Keywords: | TiB2-W coatings magnetron sputtering XRD TEM XPS |
|
|
