Staples and locking plates provide comparable outcomes for fixation of first metatarsal dorsiflexion osteotomies in pes cavovarus

BackgroundOne commonly encountered deformity within the cavovarus foot is plantarflexion of the first metatarsal which may be a primary or secondary deformity. Correcting the plantarflexion may be achieved through a dorsiflexion osteotomy although the optimal fixation device for this osteotomy has not been determined. This clinical study compared the outcomes using staples and locking plates.MethodsA retrospective evaluation was performed of 52 feet that had undergone dorsiflexion osteotomy of the first metatarsal as part of a cavovarus foot correction with a minimum follow-up of two years. Data was collected on deformity correction, complications and cost-analysis.ResultsAs a cohort, Meary’s angle improved from 13.4° to 7.72° (p < 0.001), Hibbs’ angle improved from 117.1° to 124.2° (p < 0.001) and navicular height dropped from 52.7 mm to 47.7 mm (p < 0.001) while calcaneal inclination changed from 20.9° to 21.2° but this did not reach significance (p = 0.66). These indices and the number of complications were not significantly different between the staple and locking plate group. The overall cost of using staples was less than using locking plates.ConclusionsBoth staples and locking plates are effective devices for fixation of the first metatarsal after a dorsiflexion osteotomy in cavovarus foot surgery. They were both able to provide comparable fixation, although staples were less expensive to use in our study.