Dimensional Changes in Gypsum Fragments Bonded with Cyanoacrylate

Purpose: Accidental fractures may occur during manipulation and transportation of plaster casts. In clinical practice, plaster fragments may be bonded without harming the accuracy of the final denture, provided that the bonding agent does not cause dimensional alterations. Cyanoacrylate could be a good material because of its ease of use, quick set, wide availability, and low cost. The aim of this study was to assess the dimensional alteration of Type IV plaster fragments bonded with a cyanoacrylate‐based adhesive. Materials and Methods: Ten hexagonal regular prisms were made of Type IV plaster, with two reference marks on one of the faces. The distance between the marks was measured under a comparison microscope. After this, the prisms were fractured so that the fracture line would be between the two reference marks, bonded with a cyanoacrylate‐based universal adhesive and measured again. Results: The mean difference between the measurements performed before and after fracture and bonding of the fragments was 0.0194 mm. At a level of significance of 0.05, there was no statistically significant difference between the measurements before and after fracture and bonding of the dies (p = 0.1582). Conclusion: It may be concluded that bonding of Type IV plaster fragments with a cyanoacrylate‐based adhesive did not cause significant dimensional alterations.