Combustion Synthesis and Photoluminescence Properties of Red-Emitting CaAlSiN3:Eu2+ Phosphor for White-LEDs

A combustion synthesis method has been developed for synthesis of Eu²⁺ doped CaAlSiN₃ phosphor and its photoluminescence properties were investigated. Ca, Al, Si, and Eu₂O₃ powders were used as the Ca, Al, Si and Eu sources. The addition of NaN₃, NH₄Cl and Si₃N₄ powders was found to increase significantly the product yield. These powders were mixed and pressed into a compact, which was then wrapped up with an igniting agent (i.e., Mg+Fe₃O₄). The compact was ignited by electrical heating under a N₂ pressure of ≤1.0 MPa. Effects of these experimental parameters on the product yield were investigated and a reaction mechanism was proposed. The synthesized CaAlSiN₃:Eu²⁺ phosphor absorbs light in the region of 200–600 nm and shows a broad band emission in the region of 500–800 nm due to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺. The sample doped with Eu²⁺ at the optimized molar ratio of 0.04 is efficiently excited by the blue light (460 nm) and generates emission peaking at ~650 nm with peak emission intensity ~106% of a commercially available phosphor, YAG:Ce³⁺(P46-Y3).The internal quantum efficiency of the synthesized phosphor was measured to be 71%, compared to 69% of the YAG:Ce³⁺ (P46-Y3).