Effect of water exposure on the fracture toughness and flexure strength of a dental glass.

OBJECTIVES: The low fusing dental glass (Duceram LFC) has been advertised as presenting a superior chemical resistance and augmented strength after 16h exposure to water or 4% acetic acid. The purpose of this study was to evaluate the effect of prolonged exposure to water on two mechanical properties (fracture toughness and flexure strength) of LFC. METHODS: Disks and bars were mirror polished and annealed prior to aging in: (1) air (control), (2) water for 24h at 80 degrees C and (3) water for 8 weeks at 80 degrees C. Fracture toughness (K(Ic)) was determined by indentation fracture (IF) and indentation strength (IS) using a 19.6N Vickers indentation load. Flexure strength values were obtained from three-point bending at 0.1mm/min. Statistical analysis was performed using the Weibull distribution, Tukey and Bartlett tests (P<0.05). RESULTS: Both techniques (IS and IF) showed a significant improvement in the K of Duceram LFC after 8 weeks in water (0.88 and 1.14MPa m(0.5)) as opposed to the 24-h values both in water and air (0.77-0.78MPa m(0.5)). However, for flexure strength the Weibull characteristic (S(0)) and the m parameter did not change significantly with water storage (S(0)=90-100MPa, Weibull m =7-8). SIGNIFICANCE: The increase in toughness of Duceram LFC after aging in water is an interesting and favorable observation for a restorative material exposed to the oral environment. Nevertheless, in comparison with other contemporary ceramics, the toughness of this LFC remains in the range of soda-lime-glass or classic feldspar porcelains.