The “Critical volume tolerance method” for estimating the limits of dose escalation during three-dimensional conformal radiotherapy for prostate cancer

: To describe the “Critical Volume Tolerance” (CVT) method for defining normal tissue tolerance during 3D-based dose escalation studies for prostate cancer.

: The CVT method predicts the tolerance to radiation for “in series”-type functional units based on the assumption that tolerance depends on a critical threshold “low-volume high-dose region.” The data used for describing this model were generated from 3D analysis of randomly selected patients with prostate cancer. Commonly used coplanar frou- and six-field conformal (SFC) techniques were chosen as the comparison techniques. For purposes of comparison, rectal tolerance was assumed to be reached following whole pelvic irradiation using a four-field box technique to 50 Gy, followed by a conedown boost to 70 Gy using bilateral 9 × 9 cm 120 degree arcs as popularized by investigators from Stanford University (SUH).

: Based on the average dose volume histograms for the patients studied, the maximum safe increase in dose for the SFC technique compared to the SUH technique, would be 10% if 30% of the rectal volume was the critical dose limiting volume (CVT = 30%), 5%if the CVT = 10%, or greater than 20% if the CVT = 40%. Commonly used four-field conformal techniques would not be expected to allow significant escalation of the dose without increasing the risk of complications.

: The CVT method is relatively simple, and data general based on it can be used to support normal tissue complication probability equations. The CVT method can be verified or modified as partial tolerance data become available. Based on the CVT model, sophisticated treatment techniques should allow a modest increase in the total dose of radiation delivered to the prostate without an increase in late complications.