改良全关节镜下胫骨Inlay技术重建后十字韧带的实验研究

目的 探讨采用改良全关节镜下胫骨Inlay技术重建膝关节后十字韧带(posterior cruciate ligament,PCL)手术方法的特点及优势.方法 设计专门的胫骨隧道形态及配套的胫骨钻头,设计移植物的形态和固定方法.在5具成人膝关节标本上模拟操作,年龄25～65岁;左膝2例,右膝3例.设计出全关节镜下胫骨Inlay技术重建PCL的手术操作流程(包括建立胫骨隧道的方法,移植物的引入等).操作完成后切开实验标本,进行二次观察,观察胫骨隧道内口的形态和位置是否达到设计的要求.通过对30张正常MRI片进行测量,确定胫骨隧道的角度,明确术中PCL定位器的角度.结果 胫骨隧道内口设计成14 mm×7 mm×15 mm的圆锥状,外口为直径7 mm的圆柱状,配套的胫骨钻头设计成分体式,钻头在体外装配.胫骨平台后缘斜坡与水平成36°～47°,定位器角度设定为50°.移植物使用异体跟腱,移植物骨块设计成圆锥状,与胫骨隧道内口相匹配,移植物胫骨隧道外口使用纽扣钢板固定.5例标本手术均获得成功,切开行二次检查结果显示,其中4例移植物和胫骨隧道匹配,另1例隧道外口直径偏小,移植物无法完全嵌入.结论 改良全关节镜下胫骨Inlay技术重建膝关节PCL手术具有操作简单、准确、快速、固定牢靠的特点.

Abstract：

Objective To improve the arthroscopic posterior cruciate ligament (PCL) reconstruction using tibial Inlay technique. Methods The special arthroscopic device and related fixation technique were designed. Five cadaveric knees were used to simulate the process of arthroscopic posterior cruciate ligament reconstruction using tibial Inlay technique. The knees were cut open to observe whether the outlet of the tibial tunnel shape and location met the design requirements. Thirty normal MRI films were measured to identify tunnel angle and localizer angle. Results The inner outlet of tunnel was conical shape(14 mm×7 mm×15 mm) and the outer outlet was cylinder-shaped (a diameter of 7 mm). The tibial drill was designed into a split structure and could be assembled in vitro. According to the data obtained from MRI films, the angle between the plane of posterior cruciate ligament and horizontal place was 36°-47°, and the localizer was fixed at 50°.The achilles tendon was used as implant and the allogft bones were designed into conical shape to fit the inner outlet of tunnel. The other end of implant to the proximal tibia was fixed with button plate. All reconstruction operations were performed under arthroscopy. The outcomes of procedure were satisfactory. There were no vascular or peripheral nerve injuries in the cadaveric knees The tunnel position was accurate and the shape of tunnel had met the design requirements. Conclusion Our results imply that improved arthroscopic of posterior cruciate ligament using tibial Inlay technique is simple, accurate, rapid and stable fixation.

Experimental study of improved arthroscopic reconstruction of posterior cruciate ligament using tibial Inlay technique

Objective To improve the arthroscopic posterior cruciate ligament (PCL) reconstruction using tibial Inlay technique. Methods The special arthroscopic device and related fixation technique were designed. Five cadaveric knees were used to simulate the process of arthroscopic posterior cruciate ligament reconstruction using tibial Inlay technique. The knees were cut open to observe whether the outlet of the tibial tunnel shape and location met the design requirements. Thirty normal MRI films were measured to identify tunnel angle and localizer angle. Results The inner outlet of tunnel was conical shape(14 mm×7 mm×15 mm) and the outer outlet was cylinder-shaped (a diameter of 7 mm). The tibial drill was designed into a split structure and could be assembled in vitro. According to the data obtained from MRI films, the angle between the plane of posterior cruciate ligament and horizontal place was 36°-47°, and the localizer was fixed at 50°.The achilles tendon was used as implant and the allogft bones were designed into conical shape to fit the inner outlet of tunnel. The other end of implant to the proximal tibia was fixed with button plate. All reconstruction operations were performed under arthroscopy. The outcomes of procedure were satisfactory. There were no vascular or peripheral nerve injuries in the cadaveric knees The tunnel position was accurate and the shape of tunnel had met the design requirements. Conclusion Our results imply that improved arthroscopic of posterior cruciate ligament using tibial Inlay technique is simple, accurate, rapid and stable fixation.