| Affiliation: | (1) Department of Electronics and Information, Graduate School of Science and Engineering, Hokkaido Tokai University, 5-1-1-1 Minami-Sawa, Minami-ku, Sapporo, 005-8601, Japan;(2) Department of System Information Engineering, Graduate School of Engineering, Hokkaido University, Sapporo, Japan |
| Abstract: | In this study, we developed a new miniature motor-driven pulsatile left ventricular assist device (LVAD) for implantation into a Japanese patient of average build by means of computer-aided design and manufacturing (CAD/CAM) technology. A specially designed miniature ball-screw and a high-performance brushless DC motor were used in an artificial heart actuator to allow miniaturization. A blood pump chamber (stroke volume 55 ml) and an inflow and outflow port were designed by computational fluid dynamics (CFD) analysis. The geometry of the blood pump was evaluated using the value of index of pump geometry (IPG) = (Reynolds shear stress) × (occupied volume) as a quantitative index for optimization. The calculated value of IPG varied from 20.6Nm to 49.1Nm, depending on small variations in pump geometry. We determined the optimum pump geometry based on the results of quantitative evaluation using IPG and qualitative evaluation using the flow velocity distribution with blood flow tracking. The geometry of the blood pump that gave lower shear stress had more optimum spiral flow around the diaphragm-housing (D-H) junction. The volume and weight of the new LVAD, made of epoxy resin, is 309ml and 378g, but further miniaturization will be possible by improving the geometry of both the blood pump and the back casing. Our results show that our new design method for an implantable LVAD using CAD/CAM promises to improve blood compatibility with greater miniaturization. |
