某五金塑胶厂职业病危害控制效果评价 |
| |
引用本文: | 姜立民,严燕,赖洪飘,祖爱华,莫民帅.某五金塑胶厂职业病危害控制效果评价[J].中国卫生工程学,2010(3):197-200. |
| |
作者姓名: | 姜立民 严燕 赖洪飘 祖爱华 莫民帅 |
| |
作者单位: | 深圳市南山区疾病预防控制中心,广东深圳518054 |
| |
摘 要: | 目的对某五金塑胶厂职业病危害控制效果进行评价。方法依据《中华人民共和国职业病防治法》采用现场职业卫生学调查、职业病危害因素检测和职业健康检查相结合。结果该建设项目噪声、电焊弧光、正己烷有不同程度的超标,其超标率分别为38.27%、25.00%、25.00%;其余各检测和测量项目的结果均未超过国家规定的职业接触限值。结论该项目防尘、防暑降温措施有效;防毒措施基本有效;噪声、紫外辐射控制效果欠佳,需进一步整改。
|
关 键 词: | 五金塑胶厂 职业病危害 控制效果评价 |
Control Effect of Occupational hazard in Hardware Plastic Plant |
| |
Institution: | JIANG Li-min,YAN Yan,LAI Hong-piao,et al.Nanshan District Center for Disease Control and Prevention of Shenzhen,Shenzhen Guangdong 518054,China |
| |
Abstract: | Objective To assess the control effect of occupational hazard in the hardware plastic plant.Methods The methods of occupational hygiene investigation in workplace,detection of occupational risk factors and medical examination were applied.Results The intensities(concentrations) of noise,electric welding's arc light and n-Hexane exceeded hygienic standards,which exceeding rates were 38.27%,25.00% and 25.00%,respectively.The rest ones accorded with national standards.Conclusion The protective measures of dust and high-temperature are effective;measures for chemical poisons is also basically effective,but the facilities should be improved;measures for noise and ultraviolet radiation are without satisfactory and further innovation should be made for protection facilities. |
| |
Keywords: | Hardware plastic plant Occupational hazard Assessment on control effect |
本文献已被 CNKI 维普 等数据库收录! |
|