首页 | 本学科首页   官方微博 | 高级检索  
     

B型超声射频信号高速数据采集系统设计
引用本文:王巍群,赵兴群,夏翎. B型超声射频信号高速数据采集系统设计[J]. 中国医学物理学杂志, 2006, 23(5): 376-379
作者姓名:王巍群  赵兴群  夏翎
作者单位:东南大学,生物医学工程系医学电子实验室,江苏,南京,210096
摘    要:为了取得B型超声系统的射频超声波信号,设计了基于PCI局部总线的高速数据采集系统。系统采用PLX公司的总线加速器PCI9054作为PCI的接口芯片;ADC采用AD9283,峰值采样可以达100MB/S;用两片FIFO作为数据缓冲器。采用DMA方式渎取FIFO里的数据。读取的数据以一定的格式保存,是进行各种超声射频信号处理的原始数据源。

关 键 词:B型超声射频信号  PCI局部总线  高速数据采集
文章编号:1005-202X(2006)05-0376-04
收稿时间:2006-02-31
修稿时间:2006-02-28

Design of a High-speed Data Acquisition System for Sampling the B-mode Ultrasound RF Signal
WANG Wei-qun,ZHAO Xing-qun,XIA Ling. Design of a High-speed Data Acquisition System for Sampling the B-mode Ultrasound RF Signal[J]. Chinese Journal of Medical Physics, 2006, 23(5): 376-379
Authors:WANG Wei-qun  ZHAO Xing-qun  XIA Ling
Affiliation:Department of Biomedical Engineering, Medical Electronics Laboratory, Southeast University, Nanjing Jiangsu 210096, China
Abstract:A high-speed data acquisition system based PCI local bus is designed in order to obtaining the B-mode ultrasound RF signal. The system uses the PCI9054 I/O accelerator as the PCI interface chip and uses two FIFO chips as data buffers. ADC is the AD9283, which is an 8-bit monolithic sampling analog-to-digital converter, 100MSPS conversion rate, The data is transmitted from the FIFOs to PC by DMA mode. The data is stored by some format,which is used as the original data for processing the B-mode ultrasound RF signal.
Keywords:B-mode ultrasound RF signal   PCI local bus   high-speed data acquisition
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号