|
|||||
|
|
| 心达康滴丸的成型工艺设计研究 | |
| 引用本文： | 李菁,于喜昌,邹志永.心达康滴丸的成型工艺设计研究[J].齐鲁药事,2008,27(8). |
| 作者姓名： | 李菁 于喜昌 邹志永 |
| 作者单位： | 1. 山东省职业卫生与职业病防治研究院,山东,济南,250002 2. 山东省中医药研究院,山东,济南,250014 3. 山东省药品检验所,山东,济南,250101 |
| 摘 要： | 目的确立心达康滴丸的最佳成型工艺。方法采用正交试验法,从基质,冷却剂的种类,提取物与基质的用量配比等方面进行考核。结果聚乙二醇6000,冷却温度15℃时,心达康滴丸质量最好。结论证明此工艺是可行的。 |
| 关 键 词： | 心达康滴丸 聚乙二醇 正交试验 |
Study on preparation process for Xindakang Dropping Pills |
|
| LI Jing,YU Xi-chang,ZOU Zhi-yong.Study on preparation process for Xindakang Dropping Pills[J].qilu pharmaceutical affairs,2008,27(8). | |
| Authors: | LI Jing YU Xi-chang ZOU Zhi-yong |
| Abstract: | OBJECTIVE To establish the optimum preparation process for Xindakang Dropping Pills.METHODS The preparation conditions,such as the different kinds of primary substance,cooling agent,the proportion between the extracts and primary substance,etc.,were studied with L9(34) orthogonal design.RESULTS Under the condition of using maerogol-6000,and processing temperature at 15℃,the quality of Xindakang Dropping Pills was good.CONCLUSION The preparation process was feasible. |
| Keywords: | Xindakang Dropping Pill macrogol orthogonal design |
| 本文献已被 维普 万方数据 等数据库收录！ | |