首页 | 本学科首页   官方微博 | 高级检索  
     


Design and Validation of Additively Manufactured Metallic Cellular Scaffold Structures for Bone Tissue Engineering
Authors:Mohammad O. Al-Barqawi  Benjamin Church  Mythili Thevamaran  Dan J. Thoma  Adeeb Rahman
Affiliation:1.Department of Civil and Environmental Engineering, University of Wisconsin, Milwaukee, WI 53211, USA;2.Department of Material Science and Engineering, University of Wisconsin, Milwaukee, WI 53211, USA;3.Department of Material Science and Engineering, University of Wisconsin, Madison, WI 53706, USA; (M.T.); (D.J.T.)
Abstract:Bone-related defects that cannot heal without significant surgical intervention represent a significant challenge in the orthopedic field. The use of implants for these critical-sized bone defects is being explored to address the limitations of autograft and allograft options. Three-dimensional cellular structures, or bone scaffolds, provide mechanical support and promote bone tissue formation by acting as a template for bone growth. Stress shielding in bones is the reduction in bone density caused by the difference in stiffness between the scaffold and the surrounding bone tissue. This study aimed to reduce the stress shielding and introduce a cellular metal structure to replace defected bone by designing and producing a numerically optimized bone scaffold with an elastic modulus of 15 GPa, which matches the human’s cortical bone modulus. Cubic cell and diagonal cell designs were explored. Strut and cell dimensions were numerically optimized to achieve the desired structural modulus. The resulting scaffold designs were produced from stainless steel using laser powder bed fusion (LPBF). Finite element analysis (FEA) models were validated through compression testing of the printed scaffold designs. The structural configuration of the scaffolds was characterized with scanning electron microscopy (SEM). Cellular struts were found to have minimal internal porosity and rough surfaces. Strut dimensions of the printed scaffolds were found to have variations with the optimized computer-aided design (CAD) models. The experimental results, as expected, were slightly less than FEA results due to structural relative density variations in the scaffolds. Failure of the structures was stretch-dominated for the cubic scaffold and bending-dominated for the diagonal scaffold. The torsional and bending stiffnesses were numerically evaluated and showed higher bending and torsional moduli for the diagonal scaffold. The study successfully contributed to minimizing stress shielding in bone tissue engineering. The study also produced an innovative metal cellular structure that can replace large bone segments anywhere in the human body.
Keywords:cellular structures   additive manufacturing   optimization   SS 316L scaffolds
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号