首页 | 本学科首页   官方微博 | 高级检索  
     

氩等离子体对国产SY-1硅橡胶吸水率、溶解率的影响
引用本文:邹石泉,赵铱民,邵龙泉,苏方. 氩等离子体对国产SY-1硅橡胶吸水率、溶解率的影响[J]. 中华老年口腔医学杂志, 2009, 7(6): 325-327
作者姓名:邹石泉  赵铱民  邵龙泉  苏方
作者单位:1. 首都医科大学附属北京口腔医院修复科,北京,100050
2. 第四军医大学口腔医院,陕西,710032
3. 南方医科大学南方医院口腔科,广州,510515
4. 解放军总医院口腔医学中心,北京,100853
摘    要:目的:观察氩低温等离子体对国产SY-1硅橡胶吸水率、溶解率的影响。方法:将固化好的硅橡胶试样分组,按照不同工作参数组合对处理组SY-1硅橡胶试样进行氩气低温等离子体处理,处理后测定各组的吸水率、溶解率。结果:工作参数为1T,50W,1.5min时,材料吸水率降低显著;各参数下材料的溶解率未得到改善。结论:本实验条件下氩等离子体处理可以改善材料的吸水率,不能降低其溶解率。

关 键 词:氩等离子体  硅橡胶  吸水率  溶解率

Impact on water sorption and solubility of SY-1 facial elastomer treated with Argon plasma
ZOU Shi-quan,ZHAO Yi-min,SHAO Long-quan,SU Fang. Impact on water sorption and solubility of SY-1 facial elastomer treated with Argon plasma[J]. Chinese JOurnal of Geriatric Dentistry, 2009, 7(6): 325-327
Authors:ZOU Shi-quan  ZHAO Yi-min  SHAO Long-quan  SU Fang
Affiliation:. ( The department of prosthodontics, Beijing Stomatologicat Hospital and School of Stomatology, Capital medical University)
Abstract:Objective: To evaluate the impact on water sorption and solubility of SY-1 facial elastomer treated with Argon low temperature plasma. Method: SY-1 facial elastomer specimens were cured and divided into groups randomly, and then the water absorption and solubility (8w) of the specimens were evaluated before and after the surface treatment of Argon plasma. Results: parameter combinations were found to be effective in lowering the water sorption, in which the most effective combination was IT, 50W, 1.5min, the solubility of SY-1 remained unchanged after being treated with Argon plasma. Conclusion: Within the limitations of this study, Argon plasma treatment could improve the water sorption of SY-1. So far as solubility was concerned, effective ways were to be found.
Keywords:Argon plasma  Silicon elastomer  water sorption  solubility
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号