| 稳心滴丸成型工艺优选 |
| |
| 引用本文： | 徐晓弘,熊鑫.稳心滴丸成型工艺优选[J].中国医药导报,2011,8(16):75-76. |
| |
| 作者姓名： | 徐晓弘 熊鑫 |
| |
| 作者单位： | 大庆油田总医院药学部,黑龙江大庆,163001 |
| |
| 摘 要： | 目的：优选稳心滴丸的最佳成型工艺。方法：采取单因素考察和正交试验法L9（34）,对滴丸成型影响因素进行优选,最终确定最佳制备工艺。结果：经过考察各影响因素优选出最佳制备条件为提取物与基质的最佳比例为1∶2,基质的比例为7∶3,基质选用二甲基硅油,滴距为6 cm,滴头口径1.5 mm,滴头温度70℃及冷却剂10℃的温度。结论：方法简便可靠,可作为该滴丸的制备工艺。
|
| 关 键 词： | 稳心滴丸 成型工艺 聚乙二醇 |
Study on the preparation craft of Steady Heart Dropping Pill |
| |
| XU Xiaohong,XIONG Xin.Study on the preparation craft of Steady Heart Dropping Pill[J].China Medical Herald,2011,8(16):75-76. |
| |
| Authors: | XU Xiaohong XIONG Xin |
| |
| Institution: | XU Xiaohong,XIONG Xin Department of Pharmacy,General Hospital of Daqing Oilfield,Heilongjiang Province,Daqing 163001,China |
| |
| Abstract: | Objective: To choose the best preparation craft of Steady Heart Dropping Pill.Methods: The methods of single factor to the inspection and orthogonal-sign L9(34) were used to select the best factors affecting of pill,the best preparation craft would be selected in the end.Results: After inspection of the factors affecting,the best of optimized conditions was selected with the best ratio of the extract and matrix was 1:2,the ratio of the matrix was 7:3,diethyl silicone oil was selected as matrix,dropping dist... |
| |
| Keywords: | Steady Heart Dropping Pill Craft research PEG |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
