| CI—Ⅱ渗透陶瓷表面不同处理方式对瓷与牙本质粘接抗剪强度的影响 |
| |
| 引用本文： | 于海洋 巢永烈 廖运茂,王航.CI—Ⅱ渗透陶瓷表面不同处理方式对瓷与牙本质粘接抗剪强度的影响[J].华西口腔医学杂志,2001,19(1):55-57. |
| |
| 作者姓名： | 于海洋 巢永烈 廖运茂 王航 |
| |
| 作者单位： | 于海洋（610041 四川大学华西口腔医学院）;巢永烈（610041 四川大学华西口腔医学院）;廖运茂（610041 四川大学华西口腔医学院）;王航（610041 四川大学华西口腔医学院） |
| |
| 基金项目： | 本课题为四川省科委和四川大学华西口腔医学院院基金资助项目(编号
G99027) |
| |
| 摘 要： | 目的探讨合适的渗透陶瓷表面处理方式。方法以不同的表面处理为影响因素,将陶瓷片分为4组,采用水平推式剪切强度试验法,所得试验数据经统计学分析,考察不同表面处理方式与常规Bis-GMA类树脂粘接剂间的结合强度。结果HF加硅烷、喷砂加硅烷组粘接抗剪强度24h略增加,但差别无统计学意义,在模拟口腔环境下30d后,抗剪强度下降十分明显,而热学硅涂层加硅烷组24h后增加明显,与其它组对照差别有统计学意义(P<0.05),30d后抗剪强度略有下降。结论热学硅涂层加硅烷是渗透陶瓷粘接面的较好的处理方法。
|
| 关 键 词： | 抗剪粘接强度 粘接 牙科材料 CI－Ⅱ渗透陶瓷 |
| 修稿时间： | 2000年5月17日 |
Shear Strength of Bond of
the Dentin to GI- |
| |
| Yu Haiyang.Shear Strength of Bond of
the Dentin to GI-[J].West China Journal of Stomatology,2001,19(1):55-57. |
| |
| Authors: | Yu Haiyang |
| |
| Institution: | College of Stomatology, West China University of Medical Sciences. |
| |
| Abstract: | OBJECTIVE: The adequate surface conditioning method for GI-II glass infiltrated alumia ceramic was investigated. METHODS: The test specimens were divided into 3 groups (A. HF + silicon, B. sandblasting + silicone and C. thermal silicoating + silicone). Shear bonding strengths of porcelain bonded to dentin were tested. RESULTS: The bond strength of group A and B slightly increased after one day but decreased sharply after 30 days. However, no statistical significance was observed. The group C showed a pronounced enlargement of bond strength after one day and had a durable bond after 30 days' thermal cycling. It is statistically significant when group C was compared with group A and B. CONCLUSION: It can be inferred that silicoating method be a better way for glass infiltrated alumia ceramic bonding. |
| |
| Keywords: | glass infiltrated alumia ceramic bonding shear bonding sthrength |
| 本文献已被 CNKI 等数据库收录！ |
