Measurement of coronary flow using high-frequency intravascular ultrasound imaging and pulsed Doppler velocimetry: in vitro feasibility studies.

The recent development of intravascular ultrasound imaging offers the potential to measure blood flow as the product of vessel cross-sectional area and mean velocity derived from pulsed Doppler velocimetry. To determine the feasibility of this approach for measuring coronary artery flow, we constructed a flow model of the coronary circulation that allowed flow to be varied by adjusting downstream resistance and aortic driving pressure. Assessment of intracoronary flow velocity was accomplished using a commercially available end-mounted pulsed Doppler catheter. Cross-sectional area of the coronary artery was measured using a 20 MHz mechanical imaging transducer mounted on a 4.8 F catheter. The product of mean velocity and cross-sectional area was compared with coronary flow measured by timed collection in a graduated cylinder by linear regression analysis. Excellent correlations were obtained between coronary flow calculated by the ultrasound method and measured coronary flow at both ostial (r = 0.99, standard error of the estimate [SEE] = 13.9 ml/min) and distal (r = 0.98, SEE = 23.0 ml/min) vessel locations under steady flow conditions. During pulsatile flow, calculated and measured coronary flow also correlated well for ostial (r = 0.98, SEE = 12.7 ml/min) and downstream (r = 0.99, SEE = 9.3 ml/min) locations. That the SEE was lower for pulsatile as compared with steady flow may be explained by the blunting of the flow profile across the vessel lumen by the acceleration phase of pulsatile flow. These data establish the feasibility of measuring coronary artery blood flow using intravascular ultrasound imaging and pulsed Doppler techniques.