| 茵泽驱脂丸中挥发油包合工艺研究 |
| |
| 引用本文： | 邓振华,胡素连,蒋晓煌,周卓. 茵泽驱脂丸中挥发油包合工艺研究[J]. 中国药业, 2012, 21(17): 34-35 |
| |
| 作者姓名： | 邓振华 胡素连 蒋晓煌 周卓 |
| |
| 作者单位： | 1. 湖南中医药大学附属宁乡医院,湖南,长沙,410600
2. 湖南中医药大学,湖南,长沙,410208 |
| |
| 摘 要： | 目的 优选β-环糊精包合茵泽驱脂丸中挥发油的最佳工艺.方法 采用饱和水溶液法,用L9(34)正交试验,以挥发油利用率、包合物收得率及包合物含油率为评价指标筛选最佳工艺务件.结果 最佳包合工艺为A3B2C1,即挥发油与β-环糊精的比例为1:6.包合温度40℃,包合时间1 h.结论 该工艺可提高制刑稳定性,方法简便易行,能适用于大规模生产.
|
| 关 键 词： | 茵泽驱脂丸 正交设计 挥发油 倍他环糊精 包合工艺 |
Study on Inclusion Technology for Volatile Oil on Yinze- Quzhi Pill |
| |
| Deng Zhenhua , Hu Sulian , Jiang Xiaohuang , Zhou Zhuo. Study on Inclusion Technology for Volatile Oil on Yinze- Quzhi Pill[J]. China Pharmaceuticals, 2012, 21(17): 34-35 |
| |
| Authors: | Deng Zhenhua Hu Sulian Jiang Xiaohuang Zhou Zhuo |
| |
| Affiliation: | 1. Affiliated Ningxiang Hospital of Hunan University of TCM, Changsha, Hunan, China 410600; 2. Hunan University of TCM, Changsha, Hunan, China 410208) |
| |
| Abstract: | Objective To study optimum inclusion process conditions for volatile oil on Yinze-Quzhi Pill. Methods The study was carried out with orthogonal design. To study the process conditions by determining the utilization ratio of volatile oil, the oil- bearing rate and extracted ratio of inclusion compound. Results The optimum preparation conditions for inclusion were established as oil： β- CD was 1： 6,the inclusion temperature was 40 ℃ ,the inclusion time was 1 h. Conclusion This process can improve preparation stability,and the method is convenient and can be applied to largescale production. |
| |
| Keywords: | Yinze - Quzhi Pill orthogonal design volatile oil β - cyclodextrin inclusion process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
