| 益宫胶囊的成型工艺研究 |
| |
| 引用本文： | 冯超,蔡亚玲,阮金兰. 益宫胶囊的成型工艺研究[J]. 中药材, 2008, 31(1): 128-130 |
| |
| 作者姓名： | 冯超 蔡亚玲 阮金兰 |
| |
| 作者单位： | 华中科技大学同济药学院,湖北武汉,430030 |
| |
| 摘 要： | 目的优选益宫胶囊的最佳辅料与成型工艺.方法以临界相对湿度、吸湿曲线、休止角等微粉学数据为考察筛选指标.结果以加入PH102型微晶纤维素混匀制备的粉末最佳,生产车间及储存环境的相对湿度应小于64%.结论该工艺简便可行,为益宫胶囊提供了抗吸湿性较好的成型工艺条件.
|
| 关 键 词： | 益宫胶囊 成型工艺 胶囊 成型工艺 工艺研究 Capsule Process Formulation 工艺条件 抗吸湿性 临界相对湿度 储存环境 生产车间 粉末 混匀 微晶纤维素 结果 筛选指标 考察 数据 微粉学 休止角 |
| 文章编号： | 1001-4454(2008)01-0128-03 |
| 修稿时间： | 2007-06-11 |
Research on Formulation Process of Yigong Capsule |
| |
| FENG Chao,CAI Ya-ling,RUAN Jin-lan. Research on Formulation Process of Yigong Capsule[J]. Journal of Chinese medicinal materials, 2008, 31(1): 128-130 |
| |
| Authors: | FENG Chao CAI Ya-ling RUAN Jin-lan |
| |
| Affiliation: | College of Pharmacy, Tongji Medical Center of Huazhong University of Science and Technology, Wuhan, China. Fengchao84@163.com |
| |
| Abstract: | OBJECTIVE: To choose the best supplementary material and formulation process of Yigong capsule. METHODS: Critical relative humidity, absorption curve of moisture, angle of repose were used as the norms of the research. The suitable preparation and formulation process of Yigong capsule had been sieved. RESULTS: It was feasible that the combined preparation of PH102 micro cellulse were mixed with the medicinal powder. The absorption of moisture of the medicinal powder was improved. The humidity of mass production and store was lower than 64%. CONCLUSION: This craft simple is feasible and can provide the better anti-water absorbability of formulation process condition for Yigong capsule. |
| |
| Keywords: | |
| 本文献已被 万方数据 等数据库收录！ |
|
