In situ force distribution in the glenohumeral joint capsule during anterior-posterior loading. |
| |
Authors: | R E Debski E K Wong S L Woo M Sakane F H Fu J J Warner |
| |
Institution: | Musculoskeletal Research Center, Department of Orthopaedic Surgery, University of Pittsburgh, Pennsylvania 15213, USA. genesis1+@pitt.edu |
| |
Abstract: | Our objective was to examine the function of the glenohumeral capsule and ligaments during application of an anterior-posterior load by directly measuring the in situ force distribution in these structures as well as the compliance of the joint. We hypothesized that interaction between different regions of the capsule due to its continuous nature results in a complex force distribution throughout the glenohumeral joint capsule. A robotic/universal force-moment sensor testing system was utilized to determine the force distribution in the glenohumeral capsule and ligaments of intact shoulder specimens and the joint kinematics resulting from the application of external loads at four abduction angles. Our results suggest that the glenohumeral capsule carries no force when the humeral head is centered in the glenoid with the humerus in anatomic rotation. However, once an anterior-posterior load is applied to the joint, the glenohumeral ligaments carry force (during anterior loading, the superior glenohumeral-coracohumeral ligaments carried 26+/-16 N at 0 degrees and the anterior band of the inferior glenohumeral ligament carried 30+/-21 N at 90 degrees). Therefore, the patient's ability to use the arm with the humerus in anatomic rotation should not be limited following repair procedures for shoulder instability because the repaired capsuloligamentous structures should not carry force during this motion. Separation of the capsule into its components revealed that forces are being transmitted between each region and that the glenohumeral ligaments do not act as traditional ligaments that carry a pure tensile force along their length. The interrelationship of the glenohumeral ligaments forms the biomechanical basis for the capsular shift procedure. The compliance of the joint under our loading conditions indicates that the passive properties of the capsule provide little resistance to motion of the humerus during 10 mm of anterior or posterior translation with anatomic humeral rotation. Finally, this knowledge also enhances the understanding of arm positioning relative to the portion of the glenohumeral capsule that limits translation during examination under anesthesia. |
| |
Keywords: | |
|
|