Microstructure and Fatigue Damage of 316L Stainless Steel Manufactured by Selective Laser Melting (SLM) |
| |
| Authors: | Zhentao Wang Shanglei Yang Yubao Huang Cong Fan Zeng Peng Zihao Gao |
| |
| Affiliation: | 1.School of Materials Engineering, Shanghai University of Engineering Science, Shanghai 201600, China; (Z.W.); (Y.H.); (C.F.); (Z.P.); (Z.G.);2.Shanghai Research and Development Center for Key Technologies of Ultra-Intense Laser Processing, Shanghai University of Engineering Science, Shanghai 201600, China |
| |
| Abstract: | In this paper, 316L stainless steel powder was processed and formed by selective laser melting (SLM). The microstructure of the sample was studied using an optical microscope, and the fatigue failure of the sample and the characteristics of crack initiation and propagation were analyzed, providing a research basis for the application of SLM-316L. Due to the influence of microstructure and SLM process defects, the fatigue cracks of SLM-316L mainly emerged due to defects such as lack of fusion and pores, while the cracks of rolled 316L initiated at the inclusions near the surface of the specimen. After fatigue microcrack initiation of the SLM-316L specimen, due to the existence of shear stress and tear stress, the crack tip was passivated and Z-shaped propagation was formed. The existence of internal defects in SLM-316L made the microcrack initiation random and diverse. At the same time, the existence of defects affected the crack propagation in the form of bending, bifurcation and bridge, which made the main crack propagation deviate from the maximum load direction. |
| |
| Keywords: | 316L stainless steel selective laser melting microstructure fatigue damage |
|
|
