Accuracy and safety of cortical bone trajectory screw placement by an inexperienced surgeon using 3D patient-specific guides for transforaminal lumbar interbody fusion

Cortical bone trajectory (CBT) is an alternative method for pedicle screw insertion. However, identification of the optimal entry point and the direction of the CBT can be challenging for less-experienced surgeons. The purpose of this study was to evaluate the accuracy of the CBT screw placement by an inexperienced surgeon using a three-dimensional (3D) patient-specific guide for transforaminal lumbar interbody fusion (TLIF). Retrospective analysis of the data pertaining to 30 patients (128 screws) who underwent TLIF with CBT by an inexperienced surgeon using a 3D patient-specific guide (MySpine MC, Medacta) at a single center was performed. The accuracy of the CBT screw was graded into four groups (no perforation; Grade A, 0–2 mm; Grade B, 2–4 mm; and Grade C, > 4 mm). The accuracy of the CBT screw placement was 91% (116/128). Out of the 12 misplaced screws, Grade A was observed in 7 screws (5%), Grade B was observed in 3 screws (2%), and Grade C was observed in 2 screws (2%). There were no cases of medial pedicle wall perforation. The mean screw size was 5.95 ± 0.34 mm in diameter and 40.15 ± 2.83 mm in length. Note that, the accuracy of the CBT screws increased to 97% (83/86) over the first10 cases. Preoperative planning and 3D patient-specific guide enabled the use of longer and thicker screws and an optimal entry point. These results suggest the possibility of efficacy and safety in using 3D patient-specific guides for CBT screw placement by an inexperienced surgeon.