用PCR诊断不同虫荷量的大鼠卡氏肺孢子虫肺炎的价值

目的　评价在不同虫荷量条件下用 PCR诊断大鼠卡氏肺孢子虫肺炎 (PCP)的价值。　方法　将 PCP大鼠随机分为药物治疗组及未治疗组 ,测定其肺虫荷量 ,收集其支气管灌洗液 (BAL F)和血清标本 ,用 PCR和半套式 (Sn) PCR检测标本中的卡氏肺孢子虫基因 ,比较 PCR和环六亚甲基四胺银 (GMS)染色结果 ,及与病鼠肺虫荷量的关系。　结果　虫荷量高的未治疗组病鼠的 BAL F标本 PCR、Sn PCR及 GMS染色阳性率分别为 10 0 %、10 0 %和 92 .6 % ,差异无显著性 (P>0 .0 5 ) ;而虫荷量低的治疗组的 PCR(88.1% )、Sn PCR(94 .9% )阳性率均显著高于 GMS染色镜检阳性率 (30 .5 % ) (P<0 .0 5 )。肺虫荷量 >5 0 0个 /mg肺的 PCP大鼠 ,血清 PCR阳性率显著高于≤ 5 0 0者 (分别为 4 2 .9%和 1.7% )。　结论　PCR可用于虫株负荷量较低时的 PCP诊断 ,对判断 PCP病情及疗效考核亦有一定的帮助。     

ICP-MS法测定喜炎平注射液中重金属及有害元素

目的 建立喜炎平注射液中17种重金属及有害元素的含量测定方法。方法 样品经消解后采用电感耦合等离子体质谱（ICP-MS）法测定,射频功率1 550 W;蠕动泵转速0.3 r/s;等离子气体积流量15 L/min;辅助气体积流量0.2 L/min;载气体积流量1 L/min;采样深度10 mm,重复次数为3次。结果 该方法下Li、Al、V、Cr、Fe、Co、Ni、Cu、As、Ag、Cd、Sn、Sb、Ba、Hg、Pb、Bi的检测限分别为9.584、49.858、0.504、3.016、51.209、0.142、1.116、0.675、0.924、1.421、0.403、2.770、0.711、3.584、0.590、0.411、0.169 ng/mL,定量限分别为28.933、151.085、1.528、9.139、155.179、0.429、3.381、2.046、2.799、4.312、1.220、8.394、2.155、10.861、1.965、1.244、0.513 ng/mL,各元素在一定质量浓度范围内,响应值与质量浓度的线性关系良好（r>0.999 1）,进样精密度RSD在0.8%~3.8%（n=12）,重复性RSD在0.7%~2.0%（n=6）,17种元素的加样回收率在95.7%~104.8%。20批大生产样品检测结果：Ag为未检出,Li和V为检出但低于定量限,Al、Ni、Cu、As、Ba、Hg、Pb最大质量浓度分别为0.685、0.013、0.007、0.006、0.208、0.070、0.027 μg/mL,Cr、Fe、Co、Cd、Sn、Sb、Bi为未检出或检出但低于定量限。结论 方法的专属性、线性、灵敏度、精密度、准确度、耐用性等均良好,可用于喜炎平注射液中Li、Al、V、Cr、Fe、Co、Ni、Cu、As、Ag、Cd、Sn、Sb、Ba、Hg、Pb、Bi 17种元素的含量测定,20批大生产样品中17种元素检测结果均小于限度要求,符合规定。     

ICP-MS法测定酒石酸长春瑞滨中有害元素及催化剂银残留

目的：建立电感耦合等离子体质谱法测定酒石酸长春瑞滨中有害元素及催化剂银残留的方法。方法：用微波消解处理样品,电感耦合等离子体质谱内标法测定银、钒、铬、钴、镍、铜、砷、钼、镉、锡、锑、钡、铅、汞的含量。结果：上述14种元素的方法检出限分别为0.003、0.020、0.141、0.069、0.077、0.362、0.031、0.057、0.022、0.078、0.017、0.724、0.095、0.005 ng·mL^-1,线性关系良好（r≥0.9988）,回收率为86%~110%,RSD小于15%;同时,给出了此方法各元素的不确定度评定程序。结论：本方法采用在线加内标,可有效校正仪器漂移,抑制基体干扰,提高准确率,多元素测定便捷、准确、灵敏、可靠,可用于酒石酸长春瑞滨中有害元素及催化剂银残留的测定。     

Microstructure and Mechanical Properties of Ti-25Nb-4Ta-8Sn Alloy Prepared by Spark Plasma Sintering

As the commercially most-used Ti-6Al-4V alloy has a different modulus of elasticity compared to the modulus of elasticity of bone and contains allergenic elements, β-Ti alloy could be a suitable substitution in orthopedics. The spark plasma sintering (SPS) method is feasible for the preparation of materials, with very low porosity and fine-grained structure, leading to higher mechanical properties. In this study, we prepared quaternary Ti-25Nb-4Ta-8Sn alloy using the spark plasma sintering method. The material was also heat-treated in order to homogenize the structure and compare the microstructure and properties in as-sintered and annealed states. The SPS sample had a modulus of elasticity of about 63 ± 1 GPa, which, after annealing, increased to the value of 73 ± 1 GPa. The tensile yield strength (TYS) of the SPS sample was 730 ± 52 MPa, ultimate tensile strength (UTS) 764 ± 10 MPa, and ductility 22 ± 9%. Annealed samples reached higher values of TYS and UTS (831 ± 60 MPa and 954 ± 48 MPa), but the ductility decreased to the value of 3 ± 1%. The obtained results are discussed considering the observed microstructure of the alloy.     

High maneuverability guidewire with functionally graded properties using new superelastic alloys

Nitinol shape memory alloys (SMAs) are attracting considerable attention as core materials for medical guidewires because of their excellent flexibility and shape retention. However, since Nitinol guidewires possess low rigidity, the pushability and torquability of the guidewires are insufficient. On the other hand, although guidewires made of stainless steel have high pushability, plastic deformation occurs easily. We have developed a new class of superelastic guidewires with functionally graded properties from the tip to the end by using new SMA core materials such as Cu‐Al‐Mn‐based or Ni‐free Ti‐Mo‐Sn SMAs. The tip portion of the guidewire shows excellent superelasticity (SE), while the body portion possesses high rigidity. These functionally graded characteristics can be realized by microstructural control. These guidewires with functionally graded properties show excellent pushability and torquability and are considerably easier to handle than conventional guidewires with Nitinol or stainless steel cores. Moreover, a metallic catheter using a Ni‐free Ti‐based SMA with high biocompatibility is introduced.     

A micro-autoradiographical study of the localization of 99mTc(Sn)-MDP and 99mTc-MDP in undecalcified bone sections

The localization of ^99mTc(Sn)-MDP in bone tissue was compared with ^99mTc-MDP by means of microautoradiography of undecalcified bone sections. Sections of good histological quality were obtained by a rapid embedding method in methylmethacrylate. No differences were found in the localization of these radiopharmaceuticals in fetal rat calvariae after incubation in vitro or in rat femora after administration in vivo. In the incubation experiment, hydrolyzed ^99mTc was formed. The uptake was high in areas of new bone formation. No uptake was seen in cells or in resorbing areas. In compact bone ^99mTc(Sn)-MDP was predominantly taken up in the vicinity of blood vessels.     

北京市海淀区妊娠期糖尿病和健康孕妇膳食频次与头发中锡水平的关联研究

目的 了解北京市海淀区妊娠期糖尿病(GDM)孕妇与健康孕妇头发中锡元素(Sn)的浓度分布及差异,并探讨锡暴露与膳食频次的关系.方法 本研究为巢式病例对照设计,研究对象为2017年10月—2018年10月在北京市海淀区妇幼保健院建档并自愿参加孕期队列的孕早期妇女,募集时问卷调查收集一般人口学特征和膳食频次,并采集头发标本...     

基于ICP-MS法的加味左金丸中无机元素分析

目的 通过电感耦合等离子体质谱（inductively coupled plasma mass spectrometry,ICP-MS）法建立加味左金丸中Cd、Pb、As、Hg、Co、V、Ni、Cu、Li、Sb、Ba、Mo、Sn、Cr、Na、Mg、Al、Ca、Ti、Mn、Fe、Zn、Ga、Se、Sr、Tl共计26种无机元素的测定方法。方法 加味左金丸通过微波消解法处理后,根据相对分子质量的大小选择内标物,其中⁷Li、²³Na、²⁴Mg、²⁷Al、⁴⁰Ca、⁴⁸Ti、⁵¹V、⁵²Cr、⁵⁵Mn、⁵⁶Fe、⁵⁸Ni、⁵⁹Co、⁶³Cu、⁶⁶Zn、⁷⁰Ga、⁷⁵As、⁷⁷Se、⁸⁶Sr以⁷²Ge作为内标;⁹⁵Mo、¹¹⁴Cd、¹¹⁸Sn、¹²¹Sb、¹³⁷Ba以¹¹⁵In作为内标;²⁰²Hg、²⁰⁵Tl、²⁰⁸Pb以²⁰⁹Bi作为内标。对标准品溶液、空白溶液与供试品溶液进行分析,采用标准曲线法进行定量分析。通过ICP-MS法进行测定。结果 26种无机元素线性的相关系数r ≥ 0.999 6,检出限为0.001~1.500μg/L,定量限为0.01~5.00 μg/L,精密度与重复性试验的RSD均小于5%,平均回收率在82.64%~106.44%,RSD均小于5%。对3个厂家的12批样品进行了测定,26种元素的含量差异较大,其中Na、Mg、Ca、Fe 4种元素的含量比较高,均大于500 μg/g,Cd、Pb、As、Hg、Co、Li、Sb、Mo、Sn、Cr、Se、Tl的含量比较低,均小于1 μg/g。由结果可知,人体的常量元素,如Na、Mg、Ca的含量比较高,Cd、Pb、As、Hg等有害元素含量比较低。根据《中国药典》2020年版一部的要求,本品中Cd、Pb、As、Hg与Cu均符合规定。结论 该方法快速、准确,可以用于加味左金丸中无机元素的测定。     

原子荧光光度法测定聚乳酸中的锡

目的建立原子荧光光谱法测定聚乳酸中微量元素锡.方法采用AFS-920型双道氢化物-原子荧光光度计.结果锡的浓度在2～20ng·mL-1的范围内荧光强度与进样浓度呈良好线性关系,r=0.9996;平均回收率为102.98%,RSD=6.02%,最低检出限为0.5032ng·mL-1.结论本方法简便、准确,灵敏度高.     

Clinical usefulness of In-111 chloride and Tc-99m Sn colloid scintigraphy in the diagnosis of intrathoracic extramedullary hematopoiesis

We report a case of intrathoracic extramedullary hematopoiesis associated with hemolytic anemia. While the paravertebral localization of the lesions demonstrated on CT and MRI was suspicious of intrathoracic extramedullary hematopoiesis, In-111 chloride and Tc-99m Sn colloid bone marrow scintigraphies showing a bone marrow element of the lesion were useful to confirm the diagnosis.