MSCT在对比剂外渗的急性腹部创伤性动脉损伤诊断中的应用价值

目的探讨MSCT在对比剂外渗的急性腹部创伤性动脉损伤诊断中的应用价值。方法回顾性分析本院2016年1月～2018年12月收治的44例急性创伤性腹部动脉损伤患者及58例腹部非创伤性动脉病变患者影像资料,分析急性腹部创伤性和非创伤性动脉病变所致对比剂外渗的相关性。结果 44例创伤性腹部损伤患者通过MSCT及图像后处理技术共检出59支动脉损伤,其中对比剂外渗34支、非对比剂外渗共25支;58例急性腹部非创伤组共检出58支动脉病变,其中8支存在对比剂外渗。对比剂外渗征象创伤组出现率明显高于非创伤性组(χ~2=24.42,P0.05)。结论与非创伤组相比,急性腹部创伤性动脉损伤对比剂外渗征象较为常见,MSCT可以较好地显示创伤性对比剂外渗的直接及间接征象。     

The scope of computerized simulation in competency-based maxillofacial training: a systematic review

Oral and maxillofacial surgery (OMS) teaching is set to undergo a paradigm shift towards competency-based training. With increasing focus on resident skill development and patient safety, computerized simulators are likely to play a more mainstream role in OMS training. A systematic review of the available literature was conducted, in accordance with the PRISMA guidelines, to highlight the scope of computerized simulation in OMS teaching. A PubMed search was performed by two independent reviewers, and 35 articles published in English between 2010 and 2021 that reported the use of computerized simulation for teaching maxillofacial procedures were included in the analysis. Eight articles on minor oral surgery, seven on orthognathic surgery, five on maxillofacial trauma, five on cleft lip and palate surgery, three articles each on nerve block techniques, endoscopic procedures, and reconstructive surgery, and one article on fibre-optic intubation reported the use of computerized simulation that can be applied to OMS training. Ten randomized controlled trials were identified in the search. However there was marked heterogeneity among the studies. Simulator training for skill acquisition mentored by an expert OMS educator could offer holistic resident training; however more studies that test common themes of resident training such as knowledge acquisition and skill development are necessary.     

Continuing education in the child health handbook: an educational software for primary care1

ObjectiveTo present, the process of development and evaluation of an educational software on the Child Health Handbook proposed for the continuing education of primary care nurses and physicians.MethodsQuantitative study of methodological development. For software development, the following steps were followed: definition of objectives; determination of the target audience; choice of pedagogical and theoretical reference for content; content selection and structuring; software development and evaluation by experts (five nurses and four physicians). All responded to an instrument that included four domains: pedagogical; content; functionality; system presentation and usability. The evaluation criteria were arranged on a Likert-type scale. The percentage of agreement and Content Validity Index were used for the quantitative analysis of the degree of agreement, considering a Content Validity Index cutoff point equal to 0.80.ResultsThe overall agreement index, calculated by the arithmetic mean of the Contents Validity Index of the evaluated domains, was 0.96, with scores ranging from 0.90 to 1.00. The average percentage of agreement of the experts per domain was 92.86%, with lower agreement in the content (80.95%), presentation, and usability (90.48%) domains. 100% of percentage of agreement was observed in the pedagogical and functionality domains among the evaluated specialists.ConclusionThe percentage of agreement, Content Validity Index and overall agreement index of the Child Health Handbook educational software in the context of primary care disclosed the software adequacy as an educational resource for continuing education of primary care nurses and physicians. Considering the assessed dimensions, it can also be used by other health professionals and undergraduate students.     

多层螺旋CT定量评估慢性阻塞性肺疾病病情的价值

目的探讨多层螺旋CT(MSCT)定量评估慢性阻塞性肺疾病病情的价值。方法选取2017年8月～2018年7月在湖州市第一人民医院就诊的73例慢性阻塞性肺疾病(COPD)患者作为研究对象,按照病情轻重分为Ⅰ组(轻度患者17例)、Ⅱ组(中度患者32例)、Ⅲ组(重度患者24例),并选取同期于该院体检的健康者20例为对照组。所有研究对象均行MSCT低剂量扫描,观察比较各组管腔面积(Ai)、支气管壁面积百分比(WA%)、管壁厚度与体表面积比值(T/BSA)、壁厚度与直径比值(TDR),同时予以肺功能检查,采用定量CT气道分析软件分别测量气道相关参数,并用Siemens Pulmo软件Pearson定量分析其相关性。结果对照组、Ⅰ组、Ⅱ组、Ⅲ组的FEV1均呈逐渐下降趋势,FEV1/FVC呈逐渐上升趋势,差异均有统计学意义(P0.05)。对照组、Ⅰ组、Ⅱ组、Ⅲ组的WA%、T/BSA、TDR比较,均呈逐渐上升趋势,Ai呈下降趋势,差异均有统计学意义(P0.05)。FEV1与WA%、TDR之间呈负相关(r=-0.291,P=0.000;r=-0.473,P=0.000),FEV1/FVC与WA%、TDR之间呈正相关(r=0.285,P=0.000;r=0.472,P=0.000)。结论 MSCT扫描及定量分析可为COPD患者气道病变情况提供可靠的评估信息。     

CT扫描在胸膜外孤立性纤维瘤中的诊断价值

目的探讨CT扫描在胸膜外孤立性纤维瘤(E-SFT)中的诊断价值。方法回顾性分析2015年4月至2018年4月于我院接受手术治疗的90例E-SFT患者术前CT检查影像资料和术后病理、免疫组织化学资料,评估CT检查在E-SFT诊断中的应用价值。结果 90例E-SFT患者均为单发肿瘤,免疫组织化学及病理学检查示良性80例,恶性10例;CT检查结果为良性72例,平扫表现为圆形或类圆形软组织密度影,密度不均匀,大部分边缘清晰,增强扫描表现为均匀强化;恶性18例,平扫示肿瘤体积较大,边界不清,密度不均,可见大片不规则低密度区,增强扫描瘤体强化不均匀,低密度区无明显强化;CT诊断的敏感度、准确度、特异性阳性率、阴性率分别为60%(6/10)、82%(74/90)、85%(68/80)、33%(6/18)、94%(68/72)。结论 E-SFT的CT检查影像图像具有一定的特征性,尤其是增强扫描有助于评估纤维瘤的良恶性,可将其作为术前诊断及术后复查评估的有效依据用于临床诊疗工作中。     

Comparison of the practicability of ultrasound and spiral computed tomography in the diagnosis of colon cancer: A protocol for systematic review and meta-analysis

Background:Colon cancer is a common malignant tumor of the gastrointestinal tract. Therefore, a clear diagnosis is particularly important for the treatment of colon cancer. Ultrasound and spiral computed tomography (CT) can both be used in the diagnosis, but each has its own advantages and disadvantages, which could cause confusion in clinical choice. The purpose of this study was to systematically evaluate the practicability of spiral CT and ultrasound in the diagnosis of colon cancer.Methods:A systematic search was performed by retrieving on English databases (PubMed, Embase, Web of Science, the Cochrane Library) and Chinese databases (CNKI, Wanfang, Weipu [VIP], CBM). Besides, manually search for Google and Baidu academic of diagnostic experimental study of ultrasound and spiral CT in the diagnosis of Colon Cancer. The retrieval time limit was from the establishment of the database to October 2020. Two researchers independently extracted and evaluated the quality of the data in the included study. A meta-analysis was performed using Meta Disc1.4 and RevMan5.3 software.Results:Sensitivity, specificity, positive Likelihood ratio, negative likelihood ratio, and diagnostic odds ratio were used to determine the diagnostic efficacy of ultrasonography and helical CT in colorectal cancer.Conclusions:This study will compare the practicability of CT and ultrasound in the diagnosis of colon cancer and provide reliable evidence-based basis for clinicians to choose the appropriate or best evidence-based basis.Ethics and dissemination:The private information from individuals will not be published. This systematic review also will not involve endangering participant rights. Ethical approval is not required. The results may be published in a peer-reviewed journal or disseminated in relevant conferences.OSF Registration number:DOI 10.17605/OSF.IO/WAJHQ     

CT动态增强鉴别肾上腺乏脂肪腺瘤与肾上腺结节样增生的价值

目的探讨CT动态增强对鉴别肾上腺乏脂肪腺瘤与肾上腺结节样增生的价值。方法回顾性分析经手术病理证实的12例肾上腺乏脂肪腺瘤和27例肾上腺结节样增生患者的病例资料,统计两组病例各期增强CT值,利用公式灌注值P=CT静脉期-CT平扫期、廓清值C=CT静脉期-CT延迟期、绝对廓清灌注指数APC=(C/P)×100%及相对廓清灌注指数RAPC=(C/CT静脉期)×100%得到相关参数,并通过绘制受试者工作特征曲线,鉴别两者的最佳价值。结果肾上腺乏脂肪腺瘤直径较结节样增生更大;肾上腺乏脂肪腺瘤病灶各期CT值均明显高于结节样增生,且两者灌注值P、廓清值C、APC及RAPC有明显的统计学差异。年龄、性别、高血压、病灶位置、对侧肾上腺萎缩及动脉期CT值对鉴别两者无显著意义。结论CT动态增强扫描有助于鉴别肾上腺乏脂肪腺瘤和肾上腺结节样增生。     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

非活动性结核性胸膜炎与活动性结核性胸膜炎的CT扫描影像特征分析

目的: 探讨非活动性结核性胸膜炎与活动性结核性胸膜炎CT扫描影像表现。方法: 对2012年6月1日至2021年3月30日在首都医科大学附属北京胸科医院就诊的单纯非活动性结核性胸膜炎患者68例和同期活动性结核性胸膜炎44例的CT扫描影像表现进行比较。结果: (1) 68例非活动性结核性胸膜炎患者 CT扫描影像表现中胸膜粘连62例(91.2%),胸膜有钙化者28例(41.2%),叶间裂受累22例(32.4%),胸腔积液12例(17.6%),包裹性胸腔积液8例(11.8%)。(2)44例活动性结核性胸膜炎患者CT扫描影像表现中胸膜粘连30例(68.2%),未见胸膜钙化,叶间裂受累32例(72.7%),胸腔积液43例(97.7%),包裹性胸腔积液26例(59.1%)。(3)非活动性与活动性结核性胸膜炎CT扫描影像比较:胸膜粘连、胸膜钙化发生率高,差异均有统计学意义(χ²=9.630,P=0.002;χ²=23.737,P=0.000);叶间裂受累、胸腔积液、包裹性胸腔积液的发生率低,差异均有统计学意义(χ²=12.692,P=0.000;χ²=68.548,P=0.000;χ²=28.301,P=0.000)。结论: 非活动性结核性胸膜炎的CT扫描影像与活动性结核性胸膜炎比较胸膜粘连、胸膜钙化的发生率高,胸腔积液、包裹性胸腔积液、叶间裂受累的发生率低。识别非活动性和活动性结核性胸膜炎的CT扫描影像特点,对患者临床治疗有指导意义。     

螺旋CT多时相扫描鉴别诊断肝细胞癌和血管瘤

目的:探讨螺旋CT多时相扫描对肝细胞癌和血管瘤的鉴别诊断。材料和方法:对37例患者(肝癌16例,血管瘤21例)行螺旋CT平扫和增强扫描,分析其表现。结果:37例平扫均发现低密度灶。肝细胞癌在动脉期75%有显著增强,呈高密度,在门静脉期和延迟期则呈低密度;血管瘤54%动脉期有典型增强表现,门静脉期100%有增强,24%全部填充,延迟期91%为高密度或等密度。结论:肝细胞癌和血管瘤在螺旋CT多时相增强扫描中,各有其典型的CT表现,两者鉴别的关键是门静脉期。