Association of ambient air‐pollution levels with acute asthma exacerbation among children in Singapore

BACKGROUND: Air-pollution levels have been shown to be associated with increased morbidity of respiratory diseases. METHODS: Data for ambient air-pollutant levels, meteorologic factors, and hospitalization or emergency room (ER) visits for acute asthma in Singapore children over a 5-year period (1990-4) were obtained and analyzed for associations by time-series methods. RESULTS: Throughout this period, the annual mean and 24-h mean levels for sulfur dioxide (SO2), nitrogen dioxide (NO2), and total suspended particles (TSP) and maximum 1-h daily average for ozone were generally within the air-quality guidelines established by the World Health Organization (WHO). However, positive correlation between levels of each of these pollutants and daily ER visits for asthma was observed in children aged 3-12 years, but not among adolescents and young adults (13-21 years old). The association with SO2 and TSP persisted after standardization for meteorologic and temporal variables. An adjusted increase in 2.9 ER visits for every 20 microg/m3 increase in atmospheric SO2 levels, lagged by 1 day, was observed on days when levels were above 68 microg/m3. With TSP, an adjusted increase of 5.80 ER visits for every 20 microg/m3 increase in its daily atmospheric levels, lagged by 1 day, was observed on days with levels above 73 microg/m3. Similar results were also obtained after controlling for autocorrelation by time-series analysis. CONCLUSIONS: These associations were observed even though the overall levels of all pollutants were generally within the air-quality guidelines established by the WHO. These findings suggest that asthmatic children are susceptible to increased levels of air pollutants, particularly SO2 and TSP, although the ambient levels are generally within "acceptable" ranges.     

Ambient bioassays for assessing water-quality conditions in receiving streams

The purpose of this paper is to show how short-term laboratory tests, conducted according to US Environmental Protection Agency (EPA) procedures, can be used effectively to assess water-quality conditions in streams or rivers that receive pollutants from industry or municipal or agricultural areas. Standardized, short-term tests with fish, aquatic invertebrates or algae are commonly used to estimate the acute or chronic toxicity of wastewaters; this is referred to as effuent testing. The methods used for testing effluents also can be used to assess water quality in receiving streams: in this application, the procedures are referred to as ambient testing. Despite similarity in methods, the major objective of effluent testing differs importantly from that of ambient testing. In effluent testing, the key objective is to determine how toxic an effluent is; in ambient testing, the main objective usually is that of determining if the water at a site is toxic. This difference is subtle but very important: it shapes the strategy for cost-effective ambient testing, and determines the framework for effective statistical analysis and interpretation of ambient toxicity test results. Specific case-study examples are provided demonstrating the kinds of information that can be extracted from ambient toxicity testing by use of different statistical methods, including analysis of variance, contingency-table analysis, and two types of multivariate procedures (principal components analysis and logistic regression). Examples also are given supporting the idea that an effective ambient testing programme should be long-term, and contain a diagnostic-testing component analogous to the toxicity identification procedures used to supplement effluent-testing programmes. Recommendations derived as lessons learned from largescale ambient toxicity testing programmes for receiving streams at Department of Energy facilities include: (1) testing more frequently with one species (preferably Ceriodaphnia) generally is more effective, in terms of information gained per dollar spent, than testing less frequently with two or more species; (2) use five or more sites per test period, plus two or more reference sites, whenever possible; (3) use four to six test periods per year; and (4) use diagnostic testing to supplement the ambient-testing programme. Various laboratory and in situ methods for environmental assessment are now under development, but these methods probably will not gain acceptance for use in regulatory situations for many years. Rapid growth in need for ecological risk assessments outstrips the rate at which new test procedures are approved for regulatory purposes. Thus, laboratory tests for estimating possible environmental impacts of toxic or disruptive pollutants are likely to be used more frequently during the next decade.     

Study of preclinical changes in workers exposed to inorganic mercury in chloralkali plants

Summary The aim of the present work was to clarify the question of preclinical changes of Hg intoxication (micromercurialism) in man. The study to detect these disorders was performed on 39 chloralkali plant workers who had been exposed to mercury for more than 7 years. The ambient air, urine and blood values of the last few years were determined in extensive measurements by various methods and related to one another. The average ambient air concentrations were clearly below the currently applicable threshold limit value (German MAK) of 0.1 mg/m³. For the purpose of clarifying the mentioned question of preclinical changes of intoxication, the exposed persons were subjected to psychomotor-function examinations and compared with a group of nonexposed persons. The blood pressure and pulse frequency values of both groups were also determined and compared with one another. No significant differences between the two groups of persons examined were detectable.Presented at the 18th Congress of the Deutsche Gesellschaft für Arbeitsmedizin in Frankfurt, 24th May 1978     

Fiber-Templated 3D Calcium-Phosphate Scaffolds for Biomedical Applications: The Role of the Thermal Treatment Ambient on Physico-Chemical Properties

A successful bone-graft-controlled healing entails the development of novel products with tunable compositional and architectural features and mechanical performances and is, thereby, able to accommodate fast bone in-growth and remodeling. To this effect, graphene nanoplatelets and Luffa-fibers were chosen as mechanical reinforcement phase and sacrificial template, respectively, and incorporated into a hydroxyapatite and brushite matrix derived by marble conversion with the help of a reproducible technology. The bio-products, framed by a one-stage-addition polymer-free fabrication route, were thoroughly physico-chemically investigated (by XRD, FTIR spectroscopy, SEM, and nano-computed tomography analysis, as well as surface energy measurements and mechanical performance assessments) after sintering in air or nitrogen ambient. The experiments exposed that the coupling of a nitrogen ambient with the graphene admixing triggers, in both compact and porous samples, important structural (i.e., decomposition of β-Ca₃(PO₄)₂ into α-Ca₃(PO₄)₂ and α-Ca₂P₂O₇) and morphological modifications. Certain restrictions and benefits were outlined with respect to the spatial porosity and global mechanical features of the derived bone scaffolds. Specifically, in nitrogen ambient, the graphene amount should be set to a maximum 0.25 wt.% in the case of compact products, while for the porous ones, significantly augmented compressive strengths were revealed at all graphene amounts. The sintering ambient or the graphene addition did not interfere with the Luffa ability to generate 3D-channels-arrays at high temperatures. It can be concluded that both Luffa and graphene agents act as adjuvants under nitrogen ambient, and that their incorporation-ratio can be modulated to favorably fit certain foreseeable biomedical applications.     

The origin of secondary microseism Love waves

The interaction of ocean surface waves produces pressure fluctuations at the seafloor capable of generating seismic waves in the solid Earth. The accepted mechanism satisfactorily explains secondary microseisms of the Rayleigh type, but it does not justify the presence of transversely polarized Love waves, nevertheless widely observed. An explanation for two-thirds of the worldwide ambient wave field has been wanting for over a century. Using numerical simulations of global-scale seismic wave propagation at unprecedented high frequency, here we explain the origin of secondary microseism Love waves. A small fraction of those is generated by boundary force-splitting at bathymetric inclines, but the majority is generated by the interaction of the seismic wave field with three-dimensional heterogeneity within the Earth. We present evidence for an ergodic model that explains observed seismic wave partitioning, a requirement for full-wave field ambient-noise tomography to account for realistic source distributions.

The surface of the Earth is continuously subjected to perturbing forces that generate seismic waves. Given that 70% of the surface of our planet is covered by oceans, seismic signals due to ocean storms represent the vast majority of seismic data recorded by seismometers on Earth (1). Such data carry information about the energy exchange between different Earth systems, allowing for probing our changing climate (2–4) as well as imaging the internal structure of the Earth (5). The strongest vibrations are called secondary microseisms, excited in the 0.1 to 0.3 Hz frequency range by nonlinear ocean wave–wave interaction (6, 7). They are predominantly composed of seismic surface waves, and Rayleigh waves dominate the vertical component of microseism records (8).The generation mechanism currently accepted for secondary microseisms explains the Rayleigh wave content of vertical-component noise records (9). Secondary microseisms are produced by pressure-like sources at the surface of the ocean. Rayleigh waves are excited below the seafloor due to constructive interference of P and SV body waves. At the ocean–crust interface, they are called Scholte waves when their phase velocity becomes smaller than the minimum phase velocity of the system (10). While at longer periods, ocean waves can directly couple with the seafloor and generate Love waves (11, 12), the generation mechanism of secondary microseisms cannot explain the presence of Love waves on the horizontal components of microseismic records. Observations of secondary microseism Love waves date back to the early (13) and middle (14) 20th century. A few recent studies based on high-quality digital data focused on quantifying the Love-to-Rayleigh ratio in the secondary microseism frequency range (SI Appendix, Table S1). They found that Love-to-Rayleigh ratios are frequency dependent (15) and show a predominance of Rayleigh waves (16, 17), with few exceptions (18).Hypotheses for the generation of secondary microseism Love waves envisage that they can be generated either in the region where the pressure power spectral density (PSD) is strong or along distinct propagation paths within the Earth. The first hypothesis is supported by the presence of bathymetric inclines in the source regions. Such bathymetry may lead to splitting of the vertical second-order pressure force in a component perpendicular to inclines—responsible for Rayleigh waves—and a component tangent to inclines—responsible for Love waves. The second hypothesis is supported by the presence of lateral heterogeneities within the Earth, which can lead to the generation of Love waves due to scattering and focusing/defocusing effects. Ref. 8 observed Love and Rayleigh waves coming from the same direction, concluding that Love waves do originate in the source region. On the other hand, ref. 19 noted that the greater the distance of propagation of Rayleigh waves, the larger the Love wave energy. In addition to these hypotheses, Love waves may originate from Rayleigh-to-Love wave conversion at the ocean–continent boundary, although early numerical simulations suggest that only a few percent of incident Rayleigh wave energy can be converted to Love wave energy (20). To date, no comprehensive theoretical investigations as to which mechanisms can lead to the observed secondary microseism Love waves have been conducted.     

Effects of Respirator Ambient Air Cooling on Thermophysiological Responses and Comfort Sensations

This investigation assessed the thermophysiological and subjective impacts of different respirator ambient air cooling options while wearing chemical and biological personal protective equipment in a warm environment (32.7 ± 0.4°C, 49.6 ± 6.5% RH). Ten volunteers participated in 90-min heat exposure trials with and without respirator (Control) wear and performed computer-generated tasks while seated. Ambient air cooling was provided to respirators modified to blow air to the forehead (FHC) or to the forehead and the breathing zone (BZC) of a full-facepiece air-purifying respirator using a low-flow (45 L·min^?1) mini-blower. An unmodified respirator (APR) trial was also completed. The highest body temperatures (T_TY) and least favorable comfort ratings were observed for the APR condition. With ambient cooling over the last 60 min of heat exposure, T_TY averaged 37.4 ± 0.6°C for Control, 38.0 ± 0.4°C for APR, 37.8 ± 0.5°C for FHC, and 37.6 ± 0.7°C for BZC conditions independent of time. Both the FHC and BZC ambient air cooling conditions reduced facial skin temperatures, reduced the rise in body temperatures, and led to more favorable subjective comfort and thermal sensation ratings over time compared to the APR condition; however statistical differences among conditions were inconsistent. Independent of exposure time, average breathing apparatus comfort scores with BZC (7.2 ± 2.5) were significantly different from both Control (8.9 ± 1.4) and APR (6.5 ± 2.2) conditions when ambient cooling was activated. These findings suggest that low-flow ambient air cooling of the face under low work rate conditions and mild hyperthermia may be a practical method to minimize the thermophysiological strain and reduce perceived respirator discomfort.     

Exposure to ambient air pollution and the incidence of lung cancer and breast cancer in the Ontario Population Health and Environment Cohort

Lung and female breast cancers are highly prevalent worldwide. Although the association between exposure to ambient fine particulate matter (PM_2.5) and lung cancer has been recognized, there is less evidence for associations with other common air pollutants such as nitrogen dioxide (NO₂) and ozone (O₃). Even less is known about potential associations between these pollutants and breast cancer. We conducted a population-based cohort study to investigate the associations of chronic exposure to PM_2.5, NO₂, O₃ and redox-weighted average of NO₂ and O₃ (O_x) with incident lung and breast cancer, using the Ontario Population Health and Environment Cohort (ONPHEC), which includes all long-term residents aged 35–85 years who lived in Ontario, Canada, 2001–2015. Incident lung and breast cancers were ascertained using the Ontario Cancer Registry. Annual estimates of exposures were assigned to the residential postal codes of subjects for each year during follow-up. We used Cox proportional-hazards models adjusting for personal- and neighborhood-level covariates. Our cohorts for lung and breast cancer analyses included ~4.9 million individuals and ~2.5 million women, respectively. During follow-up, 100,146 incident cases of lung cancer and 91,146 incident cases of breast cancer were diagnosed. The fully adjusted analyses showed positive associations of lung cancer incidence with PM_2.5 (hazard ratio [HR] = 1.02 [95% CI: 1.01–1.05] per 5.3 μg/m³) and NO₂ (HR = 1.05 [95% CI: 1.03–1.07] per 14 ppb). No associations with lung cancer were observed for O₃ or O_x. Relationships between PM_2.5 and NO₂ with lung cancer exhibited a sublinear shape. We did not find compelling evidence linking air pollution to breast cancer.     

Social,thermal, and temporal influences on isolation-induced and maternally potentiated ultrasonic vocalizations of rat pups

Sensory and temporal factors have been demonstrated to be involved in the regulation of isolation-induced ultrasonic vocalizations (USV) of young rats. Sensory cues include thermal, olfactory, and tactile modalities. Temporal factors include the time spent in isolation. The goal of the present research was to examine the interaction of these factors in both isolation-induced and maternally potentiated USV. Maternal potentiation of USV occurs when a brief interaction with the dam, even a passive (anesthetized) dam, elicits an augmented vocal response to a subsequent isolation, with rates of USV in rat pups well above those emitted in standard isolation tests. We found that passive maternal potentiation of USV did occur under all conditions tested. Neither a 30-min prior isolation nor high ambient temperature prevented an increase in USV rate over the rate of the original isolation. After 30-min isolation at warm temperatures when the rate of USV had fallen to zero, the pups increased vocalization in the presence of the dam as well as in the subsequent isolation. Temporal and thermal factors also interacted significantly in regulating the level of the USV emitted by the pups during the first isolation, in the presence of the anesthetized dam, and during the second isolation.     

Cold-induced enhancement of avian uncoupling protein expression,heat production,and triiodothyronine concentrations in broiler chicks

The relationships among avian uncoupling protein (avUCP) mRNA expression, heat production, and thyroid hormone metabolism were investigated in 7-14-day-old broiler chicks (Gallus gallus) exposed to a low temperature (cold-exposed chicks, CE) or a thermoneutral temperature (TN). After 7 days of exposure, CE chicks exhibited higher heat production (+83%, P<0.01), avUCP mRNA expression (+20%, P<0.01), and circulating triiodothyronine (T(3)) levels (+104%, P=0.07) for non-statistically different body weights and feed intake between 3 and 7 days of exposure as compared to TN chicks. Plasma thyroxine (T(4)) concentration was clearly decreased in CE chicks (-33%, P=0.06). The lower hepatic inner-ring deiodination activity (-47%) and the higher renal outer-ring deiodination activity (+75%) measured in CE compared to TN chicks could partly account for their higher plasma T(3) concentrations. This study describes for the first time the induction of avUCP mRNA expression by low temperature in chickens, as it has been previously shown in ducklings, and supports the possible involvement of avUCP in avian thermogenesis.