多官能度活性橡胶增韧环氧树脂的研究：Ⅲ.三元共混增韧环氧树脂

本文研究了双酚A对多官能度环氧基和羧基聚丙烯酸正丁酯橡胶增韧环氧树脂的影响。结果表明,加入双酚A,拉伸断裂能有大幅度提高,同时不降低弹性模量。这可能是由椽胶提高断裂伸长与双酚A提高屈服应力产生协同效应的结果。对羧基橡胶增韧的三元共混体系,拉伸断裂能随羧基官能度上升而增加。断裂面的形态研究表明,由于羧基橡胶与双酚A的酯化反应,大大减少了羧基橡胶聚集对增韧的不利影响。     

橡胶活性官能团对增韧环氧树脂动态力学性能的影响

用动态扭摆法测试聚丙烯酸丁酯橡胶增韧环氧树脂的动态力学行为,研究在环氧树脂低固化度和高固化度时,橡胶活性官能团种类(环氧基官能团与羧基官能团)和数量(官能度)对其影响。研究体系中橡胶玻璃化转变温度(Tg)的移动大小,与橡胶和基体树脂健合程度之间的关系。     

Aspects of silicone rubber as an encapsulant for neurological prostheses

Silicone rubber is not, at first sight, a promising material with which to encapsulate a piece of implantable microelectronics expected to last ten or twenty years. It is well known to be very permeable to water. In fact, if correctly applied, it performs very well for ten years, possibly longer. The paper considers the part player by osmosis in achieving satisfactory performance combined with simple technology.     

橡胶木粉填充LLDPE复合材料的结构和力学性能

用橡胶木粉填充线性低密度聚乙烯(LLDPE)，研究了酸、碱溶液预处理木粉的效果和硅烷偶联荆(KH-570)、MMA接枝的天然橡胶胶乳(MGL-30)两种改性剂对橡胶木粉表面改性的效果，以及未粉粒径和填充量等对木粉／LLDPE复合材料力学性能的影响，并用SEM对复合材料拉伸断面的形态结构进行了分析。结果表明：木粉的拉径、木粉填充量和改性荆用量对复合材料的力学性能有较大的影响，经碱溶液预处理再用改性荆改性后的木粉能有效地改善木粉与LLDPE的界面粘结强度，提高橡胶木粉／LLDPE复合材料的力学性能。     

Blue rubber bleb nevus syndrome and pulmonary hypertension: an unusual association

INTRODUCTION: Blue rubber bleb nevus syndrome (BRBNS) is a rare congenital systemic angiodysplasia with multiple vascular malformations in the skin, gastrointestinal tract and, less often, in other internal organs and the brain. CASE REPORT: A 36-year-old man with past history of BRBNS was admitted to our hospital for progressive dyspnea and fatigue. Primary pulmonary hypertension (PPH) was diagnosed. He then developed acute abdominal pain and dyspnea, dying in a few hours due to sudden cardiac arrest. Postmortem examination demonstrated angiomatous lesions located in the skin, small bowel, heart, lungs, liver and thyroid. The lesions were slightly raised, soft and compressible and microscopically consisted of dilated vascular channels lined by a flattened endothelium. The vascular wall was formed by several layers of smooth muscle cells, intermixed with abundant aggregates of elastic lamellae and thin collagen fibers. Luminal thrombi were a frequent finding. In the small bowel, we identified the presence of an abnormally large artery directly opening into a thin-walled venous channel. The most striking finding in the lungs was the presence of thrombi of varying age in the lumen of segmental and elastic arteries, as well as muscular arteries and arterioles. Severe medial hypertrophy of muscular arteries and muscolarization of arterioles were also present. Intimal proliferative lesions and plexiform lesions were never observed. CONCLUSION: The pulmonary findings are consistent with recurrent thromboembolic events from shunts in the visceral lesions. To our knowledge, this is the first report of BRBNS with visceral arterovenous (AV) fistulae complicated by thromboembolic pulmonary hypertension (PH).     

硅凝胶人工晶体的生物相容性

本文参照国内外有关医用高分子材料的生物学评价试验方法,对国产医用级硅凝胶人工晶体作了系统的生物学评价。结果表明:硅凝胶人工晶体对眼及皮肤无刺激作用、无热原、无毒性、体外溶血率小于5％,对细胞生长有促进作用,长期植入皮下时,随植入时间延长,囊壁厚度逐渐变薄,炎性细胞反应30天基本消失。染色体及骨髓多染红细胞未受影响。因此,可以认为硅凝胶人工晶体有良好的生物相容性。     

Silicone rubber and natural rubber as biomaterials

The roles of silicone rubber and natural rubber as biomaterials are contrasted, with silicone rubber being widely used and natural rubber having, as yet, found limited application. Relevant properties of both elastomers are described, applications are discussed and possible future developments are considered.     

Urothelial cell DNA adducts in rubber workers

Workers employed in the rubber industry appear to have a significant excess cancer risk in a variety of sites, including cancer of the urinary bladder. In this cross-sectional study, we investigated the occurrence of DNA adducts in exfoliated bladder cells of currently exposed, nonsmoking rubber workers (n = 52) and their relationship with occupational exposure estimates and acetylation phenotype (NAT2). Four DNA adducts were identified, with the proportion of positive samples (e.g., DNA samples with quantifiable levels of a specific DNA adduct) ranging from 3.8 to 79%. The highest proportion of positive samples and the highest relative adduct labeling levels were in workers involved in the production functions "mixing" and "curing," areas with potential for substantial exposure to a wide range of chemical compounds used in rubber manufacturing (P < 0.05 for adducts 2 and/or 3, compared to all other departments). No statistically significant relationships were found between identified DNA adducts and urinary mutagenicity or personal inhalable and dermal exposure estimates. Interestingly, subjects with a fast NAT2 acetylation phenotype tended to have higher levels of DNA adducts. This study suggests that rubber workers engaged in mixing and curing may be exposed to compounds that can form DNA adducts in urothelial cells. Larger studies among rubber workers should be conducted to study in more detail the potential carcinogenicity of exposures encountered in these work areas.     

真空紫外辐照对加成型硅橡胶光学性能的影响

考察了加成型硅橡胶在真空环境中经1000ESH紫外辐照后的性能变化。结果表明,辐照后材料均出现发黄的现象,光学透过率大幅度 下降,同时加入硅酸钾包覆后制备的热控涂层反射率下降。经原位测试与离位测试,发现加成型硅橡胶在两种不同条件下测得的结果差异较小,而在有机硅橡胶中加入ZnO后原位与离位测试结果则差异明显,表现出明显的漂白作用。