High resolution solid-state 29si nmr spectroscopy of silicone gels used to fill breast prostheses

We have used ²⁹Si solid-state nuclear magnetic resonance (NMR) spectroscopy to study the chemical structure of the silicone gels in virgin and explanted breast prostheses. Despite evidences of alteration in the morphological appearance of the silicone gel inside the breast prosthesis, our results do not reveal changes in the chemical nature and structure of the silicone gels after implantation. In addition to the main ²⁹Si resonance peak at ?22.26 ppm that corresponds to the resonance frequency of the D repeat unit of the polysiloxane chains, the high sensitivity of our NMR technique allows the detection of very low concentrations of silicone compounds. Within our experimental detection limit of 0.2%, no signal between ?90 ppm and ?150 ppm are observed. This indicates that no silica products are present inside the gel of the prostheses. Furthermore, our ²⁹Si NMR spectra indicate differences in the chemical compositions of the silicone gels from different manufacturers.     

Study of nerve regeneration in centrocentral anastomosis

Summary Nerve regeneration was studied in a model of centrocentral anastomosis (CCA) performed on the sciatic nerve of the rat. Experimental CCA was made by suturing the proximal end of the peroneal branch on the proximal end of the sural branch, placing between them a peroneal nerve graft (Group I, 20 rats) or a silicone chamber (Group II, 12 rats). Nerve grafts had a length of 5mm and silicone chambers 7 mm. In six silicone chambers an 1 mm nerve graft was placed in the centre of the tube. In group I animals anterograde degeneration was studied by cutting the graft 60 days after surgery. In group II, nerve regeneration was studied 2, 4 and 8 weeks after surgery. Results indicate that in CCA: 1) regenerated axons coming from one nerve end grow into the graft but do not cross the contralateral suture line; 2) regeneration is poorer in silicone chambers than in nerve grafts; and, 3) in silicone chambers regeneration is related to time. The reduction in the regenerative capability in CCA seems to be related to the alteration of nerve sprouts aiming for the peripheral targets.     

Macrophage response to microtextured silicone

Seven different silicone surface textures were tested for effect on macrophage spreading and metabolic activity in vitro. Variables of the textured arrays that could modify spreading were determined to be the size, spacing between, depth, density, and orientation of the individual surface events and the roughness of the surfaces. Cells were influenced by the size of the events and the roughness of the surfaces more than any other variables. Cell morphology data, surface area and perimeter, could be divided into discrete regions that correlated well with the size of the events. Cell dimensions on 5μm textures were smallest while those on smooth silicone and glass surfaces were the largest. Surface texture events may be modifying contact guidance of the cells or interacting with specific transmembrane proteins to alter cell shape and function. The mitochondrial activity of cells attached to the textured silicones was determined by measuring the amount of reduced MTT directly through live cells. Cells on polystyrene (PS), 5VP and 8VP textures were metabolically more active than cells on the other textures. PMA was used to stimulate cells on the various textures. PMA-stimulated cells, on the smaller textures, 2VP, 5VP and 5CP, were less active than test cells that were not stimulated. The inability of PMA to stimulate these cells may be due to a structural alteration of protein kinase C. An hypothesis is introduced that includes a possible mechanism of how a micrometre-sized surface texture could modify cell function.     

多官能度活性橡胶增韧环氧树脂的研究：Ⅲ.三元共混增韧环氧树脂

本文研究了双酚A对多官能度环氧基和羧基聚丙烯酸正丁酯橡胶增韧环氧树脂的影响。结果表明,加入双酚A,拉伸断裂能有大幅度提高,同时不降低弹性模量。这可能是由椽胶提高断裂伸长与双酚A提高屈服应力产生协同效应的结果。对羧基橡胶增韧的三元共混体系,拉伸断裂能随羧基官能度上升而增加。断裂面的形态研究表明,由于羧基橡胶与双酚A的酯化反应,大大减少了羧基橡胶聚集对增韧的不利影响。     

橡胶活性官能团对增韧环氧树脂动态力学性能的影响

用动态扭摆法测试聚丙烯酸丁酯橡胶增韧环氧树脂的动态力学行为,研究在环氧树脂低固化度和高固化度时,橡胶活性官能团种类(环氧基官能团与羧基官能团)和数量(官能度)对其影响。研究体系中橡胶玻璃化转变温度(Tg)的移动大小,与橡胶和基体树脂健合程度之间的关系。     

Evaluation of Mechanical Properties of ZY-1 Maxillofacial Prosthetic Materials

Objective Maxillofacial prosthetic materials are used to replace facial parts lost through disease or trauma. Silicone rubbers are the materials of choice. The silicone elastomer A-2186 is a widely used maxillofacial prosthetic material. It is a pourable two-component silicone rubber cured by a platinum catalyst. Used as a prosthetic material, A-2186 has short working time and good mechanical properties. The purpose of this study is to evaluate the physical properties of new prosthetic materials based on addition-type silicone elastomer （ZY-1）, and compared the mechanical properties with those of A-2186, Methods Hardness, tensile strength, ultimate elongation, tear strength and adhesive bonding strength of ZY-1 and A-2186 were compared. Statistical analyses were done using a two-way analysis of variance （ANOVA）. Results The hardness and ultimate elongation of ZY-1 is similar to A-2186. However, tensile strength, tear strength of ZY-1 were higher than those of A-2186. Conclusion ZY-1 addition-type silicone elastomer processed good mechanical properties for use as a maxillofacial prosthetic material.     

Aspects of silicone rubber as an encapsulant for neurological prostheses

Silicone rubber is not, at first sight, a promising material with which to encapsulate a piece of implantable microelectronics expected to last ten or twenty years. It is well known to be very permeable to water. In fact, if correctly applied, it performs very well for ten years, possibly longer. The paper considers the part player by osmosis in achieving satisfactory performance combined with simple technology.     

弱呼吸敏感电极研究

应用物理学，化学和工艺等方法，分别处理５种国内外敏感器，以组成相应呼吸敏感电极，结果显示，各种电极的气－电转换性能有明显改善，其中以上海复旦片性能达到弱呼吸敏感电极要求。     

橡胶木粉填充LLDPE复合材料的结构和力学性能

用橡胶木粉填充线性低密度聚乙烯(LLDPE)，研究了酸、碱溶液预处理木粉的效果和硅烷偶联荆(KH-570)、MMA接枝的天然橡胶胶乳(MGL-30)两种改性剂对橡胶木粉表面改性的效果，以及未粉粒径和填充量等对木粉／LLDPE复合材料力学性能的影响，并用SEM对复合材料拉伸断面的形态结构进行了分析。结果表明：木粉的拉径、木粉填充量和改性荆用量对复合材料的力学性能有较大的影响，经碱溶液预处理再用改性荆改性后的木粉能有效地改善木粉与LLDPE的界面粘结强度，提高橡胶木粉／LLDPE复合材料的力学性能。     

光固化复合树脂修补方法的比较研究

本研究评价了喷砂、氢氟酸(HF)、氢氟酸处理后涂KH-570乙醇液等方法时国产GD光固化复合树脂以及进口VIVADENT复合树脂的修补效果.结果表明:9.6%HF处理国产树脂、喷砂处理进口树脂均获得最大的修补强度,HF KH-570处理方法虽为每种材料中之最小者,但与其它修补方法间无显著性差异.