再生丝素/NMMO·H2O溶液的流变性能

使用N-甲基吗啉-N-氧化物的水合物(NMMO·H2O)作为再生丝素的溶剂.可以得到w=0.10～0.25的再生丝素/NMMO·H2O溶液.研究了再生丝素/NMMO·H2O溶液流变性能,讨论了剪切速率、温度和溶液中的再生丝素的含量对再生丝素/NMMO·H2O溶液流变性能的影响.     

甲壳素溶液流变性能的初步研究

用热重分析仪和高级流变扩展系统分别研究了提纯工艺对甲壳素的影响和甲壳素／二氮乙酸溶液的流变特性。结果表明，提纯后的甲壳素为纯白色，且杂质含量减少。甲壳素／二氯乙酸溶液的表观粘度随剪切速率的增加而减小，结构粘度指数随浓度的增加而减小。剪切应力一剪切速率的曲线随着溶液浓度的增加而上移，浓度越大，其非牛顿指数n越小。该结构为确定合理的甲壳素纤维原丝生产工艺提供了科学依据。     

芳基乙炔预聚物流变性能研究

用L－90流变仪研究了芳基乙炔预聚物的流变性能。结果表明：在所研究的温度范围内,芳基乙炔聚物流体为牛顿流体,其粘度随温度增加而降低,粘流活化随预聚物分子量的增加而增加。预聚物在室温存储过程中粘度逐渐增加;在60－80℃恒温90min其粘度变化不大。     

Effect of Flocculants Residue on Rheological Properties of Ultra-Fine Argillaceous Backfilling Slurry

Tailings concentration is indispensable for backfilling. Additionally, the residual flocculants in the concentration process affect the rheological properties of ultra-fine argillaceous backfilling slurry (e.g., viscosity and yield stress), resulting in a great effect on the fluidity and resistance of pipeline transportation. In this study, to explore the effect of flocculants residue on the rheological properties of the slurry, a series of rheological tests (constant shear rate test and variable shear rate test) were performed by changing the type, dosage, stirring time, temperature of flocculants addition and the amount of binder added. The results showed that the addition of flocculants increased the viscosity and yield stress of slurry. At a certain amount of flocculants additive, the flocculant network structure reached the best development state, which had a positive effect on increasing slurry viscosity and yield stress. As the stirring time increased, the scale of damage to the flocculant network structure became larger, which had a negative effect on increasing slurry viscosity and yield stress. Low temperature weakened the adsorption and bridging effect of polymeric chains, resulting in a poorly developed flocculant network structure, which had a negative effect on increasing slurry viscosity and yield stress. Caused by hydration products, the viscosity and yield stress of slurry with binder further increased. This study is significant for an in-depth study of the rheological and pipeline transport characteristics of ultra-fine argillaceous backfilling slurry, optimising the selection of flocculants for ultrafine particles, guiding backfill parameters and improving the reliability of pipeline transport.     

Correlation Analysis of Linear Viscoelastic (LVE) Properties,Damage Resistance and Microstructure of Unmodified Asphalt Binders with the Same Penetration Grade

The penetration grade system is still widely adopted for selecting asphalt binder with desired paving performance. However, the initial material compositions of asphalt binder with the same penetration level are still different, and vary with the crude oil source and essentially result in different rheological performance. This study aimed to assess the linear viscoelastic (LVE) properties, and high- and intermediate-temperature and microscale characteristics of seven unmodified asphalt binders from different sources and countries with the same penetration level of 70. The LVE parameters were firstly evaluated followed by comparisons to various damage-based indexes. The microstructure of asphalt binders was further investigated followed by correlations between morphology and performance parameters. Experimental results indicate the |G*|/sin δ is well related to the MSCR-based non-recoverable creep compliance; furthermore, the R and |G*|·sin δ can generally represent the LAS-based failure strain and fatigue life, respectively. The viscoelastic nature of tested binders was clearly distinguished and related to rheological performance by atomic force microscopy (AFM). The roughness parameters and the phases’ content derived from AFM images showed significant correlations with LVE characteristics and fatigue resistance nature, respectively. This research provides theoretical foundations for further investigating the rheological performance and microstructure characteristics, and their correlations with asphalt binders.     

The Synergistic Effect of Polyphosphates Acid and Different Compounds of Waste Cooking Oil on Conventional and Rheological Properties of Modified Bitumen

In order to conserve non-renewable natural resources, waste cooking oil (WCO) in bitumen can help lower CO₂ emissions and advance the environmental economy. In this study, three different components of WCO were isolated and then, together with polyphosphoric acid (PPA), used separately as bitumen modifiers to determine the suitability of various substances in WCO with PPA. Conventional tests, including penetration, softening point temperature, and ductility, and the dynamic shear rheology (DSR) test, including temperature sweep and frequency sweep, were used to evaluate the influence of WCO/PPA on the traditional performance and rheological properties at high and low temperatures. The results indicate that WCO reduced the ductility and penetration value, when the use of PPA increased the softening point temperature and high-temperature performance. Compared to reference bitumen, the rutting factor and viscous activation energy (Ea) of bitumen modified with 4% WCO and 2% PPA has the most significant increase by 18.6% and 31.5, respectively. All components of WCO have a significant impact on improving the low-temperature performance of PPA-modified bitumen. The performance of the composite-modified bitumen at low temperatures is negatively affected by some waxy compounds in WCO, such as methyl palmitate, which tends to undergo a solid–liquid phase change as the temperature decreases. In conclusion, the inclusion of WCO/PPA in bitumen offers a fresh approach to developing sustainable pavement materials.     

Characterizing the Phase-Structure and Rheological Response-Behavior of Multi-Walled Carbon Nanotubes Modified Asphalt-Binder

In this study, the phase-structure and rheological response-behavior of multi-walled carbon nanotube (MWCNTs) modified asphalt-binder (MWCNTs-MA) were measured and quantified in the laboratory. The changes in the molecular dynamics due to MWCNTs modification were simulated and quantified based on the intermolecular interaction energy computations, electrostatic potential surface analyses and phase-structure modeling of the asphalt-binder matrix. The rheological properties such as the asphalt-binder viscosity and complex modulus, of both the base and modified asphalt-binders, were determined using the standard Brookfield viscometer (BV) and dynamic shear rheology (DSR) test devices, respectively. In comparison to the base asphalt-binder, the corresponding BV-DSR test results exhibited higher viscosity and complex modulus for the MWCNTs modified asphalt-binder, with reduced sensitivity and susceptibility to temperature variations. From the study results, it was observed that MWCNTs significantly improved the rheological properties and high-temperature performance of the asphalt-binder. Overall, the study has demonstrated that MWCNT modified asphalt-binder has great promising potential for application and usage as a road-pavement material, particularly with respect to mitigating the high temperature related distresses such as rutting.     

Mineral trioxide aggregate enriched with iron disulfide nanostructures: an evaluation of their physical and biological properties

The purpose of this study was to characterize mineral trioxide aggregates (MTA) enriched with iron disulfide (FeS₂) nanostructures at different concentrations, and to investigate their storage modulus, radiopacity, setting time, pH, cytotoxicity, and antimicrobial activity. Iron disulfide nanostructures [with particle size of 0.357 ± 0.156 μm (mean ± SD)] at weight ratios of 0.2, 0.4, 0.6, 0.8, and 1.0 wt% were added to white MTA (wMTA). The radiopacity, rheological properties, setting time, and pH, as well as the cytotoxicity (assessed using the MTT assay) and antibacterial activity (assessed using the broth microdilution test) were determined for MTA/FeS₂ nanostructures. The nanostructures did not modify the radiopacity values of wMTA (~6 mm of aluminium); however, they reduced the setting time from 18.2 ± 3.20 min to 13.7 ± 1.8 min, and the storage modulus was indicative of a good stiffness. Whereas the wMTA/FeS₂ nanostructures did not induce cytotoxicity when in contact with human pulp cells (HPCs) and human gingival fibroblasts (HGFs), they showed bacteriostatic activity against Staphylococcus aureus, Escherichia coli, and Enterococcus faecalis. Adding FeS₂ nanostructures to MTA might be an option for improving the root canal sealing and antibacterial effects of wMTA in endodontic treatments.     

Sodium oleate induced rapid gelation of silk fibroin

Silk fibroin has acquired increasing interest in the last years for application in medicine and namely in tissue engineering. Several methods have been developed to process fibroin and for the fabrication of nets, sponges, films and gels. This paper deals with the fabrication and characterization of fibroin hydrogels obtained by using sodium oleate as gelation agent. Gels have been prepared by mixing Silk fibroin (SF) and Sodium oleate (SO) water solutions in different concentrations, and a quite wide frame of compositions have been explored. Rheological tests have been performed to determine the gelation times, scanning electron microscopies have been made to evaluate morphologies, FTIR analysis has been done to determine the conformation of the starting materials and of the resulting gels, water content has been measured and cytotoxicity tests have been performed to validate the potential biomedical use of the hydrogels. Depending on the SF and SO different gelation times have been obtained thanks to the formation of intermolecular bonds between the fibroin chains. The obtained fastest gelation of about 80 s could make this specific formulation compatible with in situ gelation. By changing composition, gels with different morphologies, rheological properties and water contents have been prepared.     

Platelet and haemorheological markers in 'high risk' hypertensives are improved by tighter blood pressure control and cardiovascular risk management: a substudy of the Anglo-Scandinavian Cardiac Outcomes Trial (ASCOT)

OBJECTIVE: To investigate the impact of intensified cardiovascular risk management on soluble markers of platelet, endothelial and rheological function in a population of middle-aged hypertensive patients at high risk of cardiovascular complications. DESIGN: Prospective follow-up study. SUBJECTS AND METHODS: A total of 159 hypertensive patients [138 male, mean age 64 (+/-8) years] and 80 healthy controls were studied. Plasma levels of soluble P-selectin (sP-sel, a marker of platelet function), von Willebrand factor (vWF, an index of endothelial damage/dysfunction) and rheological indices [fibrinogen (Fib), plasma viscosity (PV), haematocrit (HCT), white blood count (WBC) and platelet count] were measured at baseline and again (in the patients) after 6 months' treatment. RESULTS: As expected, 6 months of intensified cardiovascular risk management resulted in a significant fall in mean blood pressure (BP) and total cholesterol. It also resulted in reduced haematocrit, vWF, sP-sel, WBC and PV levels (all P < 0.001), but not plasma fibrinogen. There were no correlations between the fall in BP and the improvement in any of the research indices. CONCLUSIONS: Intensified cardiovascular risk management results in significant improvements in indices of endothelial, platelet and rheological function in a population of hypertensives at high risk of cardiovascular events. These improvements appear to be independent of the degree of change in BP. Given the fundamental role of interactions between the endothelium and circulating blood components in the pathogenesis of hypertensive complications this may be of importance in preventing adverse cardiovascular outcomes.