直丝弓矫治器和Begg矫治器治疗安氏Ⅱ类1分类错[牙合]畸形疗效比较

目的:对比不同矫治器对错[牙合]畸形患者面高度及前后牙咬合关系的影响。方法:选取于笔者医院接受矫治的83例错[牙合]畸形患者,根据患者矫治器类型分为直丝弓组和Begg组,分别为42例和41例。比较并分析两组患者治疗前后牙咬合关系、硬组织、磨牙及面高度的变化情况。结果:矫治后,两组患者OJ-PPV、OB-PP、LMA-MPV、LMA-MPV均降低,Begg矫治组OJ-PPV水平显著高于直丝弓矫治组,OB-PP、LMA-MPV、LMA-MPV水平显著低于直丝弓矫治组,差异均具有统计学意义(P<0.05);两组患者LAFH、LAFH/TAFH、PFH/TAFH水平均升高,其中Begg矫治组患者LAFH水平显著低于直丝弓矫治组,差异均具有统计学意义(P<0.05);两组患者LMA-MP、LMC-MP水平均升高,差异具有统计学意义(P<0.05);矫治前后,两组患者SNA、SNA、ANB水平均无统计学差异(P>0.05)。结论:两种矫治器对错[牙合]畸形患者硬组织变化均无明显影响,其中Begg矫治对患者前后牙咬合关系改善作用更强,直丝弓对患者面高度的改善能力更强。     

High-Frequency Irreversible Electroporation Using 5,000-V Waveforms to Create Reproducible 2- and 4-cm Ablation Zones—A Laboratory Investigation Using Mechanically Perfused Liver

PurposeTo investigate if high-frequency irreversible electroporation (H-FIRE) treatments can be delivered at higher voltages and with greater energy delivery rates than currently implemented in clinical irreversible electroporation protocols.Materials and MethodsTreatments using 3,000 V and 5,000 V were administered to mechanically perfused ex vivo porcine liver via a single applicator and grounding pad (A+GP) as well as a 4-applicator array (4AA). Integrated energized times (IET) 0.01–0.08 seconds and energy delivery rates 25–300 μs/s were investigated. Organs were preserved at 4°C for 10–15 hours before sectioning and gross analysis using a metabolic stain to identify the size and shape of ablation zones.ResultsA+GP ablations measured between 1.6 cm and 2.2 cm, which did not increase when IET was increased from 0.02 seconds to 0.08 seconds (P > .055; range, 1.9–2.1 cm). Changes in tissue color and texture consistent with thermal damage were observed for treatments with energy delivery rates 50–300 μs/s, but not for treatments delivered at 25 μs/s. Use of the 4AA with a 3-cm applicator spacing resulted in ablations measuring 4.4–4.9 cm with energy delivery times of 7–80 minutes.ConclusionsH-FIRE treatments can rapidly and reproducibly create 2-cm ablations using an A+GP configuration. Treatments without thermal injury were produced at the expense of extended treatment times. More rapid treatments resulted in ablations with varying degrees of thermal injury within the H-FIRE ablation zone. Production of 4-cm ablations is possible using a 4AA.     

颊脂肪垫瓣在修复口腔颌面部缺损中的应用

目的探讨颊脂肪垫瓣在修复口腔颌面部缺损的应用和效果.方法将颊脂肪垫形成一蒂在后方的颊脂肪垫组织瓣转移至缺损区,在无张力下与创缘缝合,表面轻轻用碘仿纱布缝线包压法固定.用以修复口腔颌面部的良恶性肿瘤手术或损伤留下的缺损以及口腔上颌窦瘘共18例.其中修复腭部缺损2例,上颌骨切除后缺损7例,颊黏膜癌切除后缺损3例,颊部良性肿瘤切除后缺损4例,磨牙后区黏表癌切除后缺损1例,封闭拔牙后口腔上颌窦瘘1例.结果术后10 d去除碘仿纱布,见颊脂肪垫轻度水肿,2～4周后水肿明显消退,颊脂肪垫表面逐渐上皮化,6～8周内表面完全上皮化,3个月后再生黏膜与正常口腔黏膜相似.全部病例效果满意,无感染、坏死等并发症发生.结论带蒂颊脂肪垫瓣修复口腔颌面部缺损,方法简单、易行,效果满意,值得推广.     

叩齿紧咬运动中松动牙动态力变化特点的研究

目的:研究紧咬、叩齿运动中松动牙牙合力的动态变化特征。方法:选择19例单侧下颌第一磨牙松动的患者,用PVDF动态牙合力仪测量健侧和患侧下颌第一磨牙节律性叩齿和紧咬运动中牙合力动态变化曲线,分析最大牙合力峰值和到达峰值的时间,对两侧的测量结果进行分析。结果:叩齿运动中健侧下颌第一磨牙牙合力峰值平均为25kg,到达峰值的时间为108ms;患侧的分别为21kg和126ms;紧咬运动中健侧下颌第一磨牙牙合力峰值平均为27kg,到达峰值的时间为768ms;患侧的分别为23kg和1023ms;经配对t检验,健侧与患侧的峰值及到达峰值的时间差异均有显著性。结论:牙齿松动导致咀嚼功能降低,牙合力值和牙合力上升的速度均降低。     

Social and psychological factors associated with adolescents'' self-acceptance of occlusal condition

Studies using plaster models of teeth and photographs simulating the full range of occlusal conditions have found high agreement between measures of adolescent social acceptability of these conditions and perceived need for orthodontic treatment. This study examined the association between adolescents' acceptability of their own occlusal condition, severity of malocclusion, and likelihood of undergoing orthodontic treatment. The factors predicting the acceptability of occlusal condition of 13-yr-olds, as assessed by the SASOC scale, were measurements of acceptability of general physical appearance, and the severity of occlusal condition. Variability in SASOC scores appeared to be independent of gender, socioeconomic status, and ethnicity. Gender, and severity of occlusal condition were important differences between subjects who had received, planned, or were undergoing orthodontic treatment, and those who had not. Neither SASOC scores nor perceived need for treatment accounted for a significant proportion of the variance between these groups. Although adolescents seeking orthodontic treatment had a greater severity of malocclusion than those not, little difference was observed between these groups in acceptance of occlusal condition.     

Crowns cemented on crown preparations lacking geometric resistance form. Part II: effect of cement.

PURPOSE: This study evaluated the effect of different cements on resistance to dislodgment of crowns cemented on preparations lacking geometric resistance form. MATERIALS AND METHODS: A preparation that offered no geometric resistance form, with 20 degrees total occlusal convergence (TOC), 0.9 mm wide shoulder finish line, and a 2.5 mm axial wall height was created on an ivorine tooth using a milling machine. Ten metal test specimen die replicas and 10 standardized metal crowns with recipient sites for the application of external forces through a universal testing machine were fabricated. The crowns were cemented on the dies under 5 and 10 kg external loads, the marginal openings measured, loaded to dislodgment, and cleaned of cement. The process was repeated using zinc oxide and eugenol (ZOE), zinc phosphate (ZPh), resin modified glass ionomer (RMGI), and composite resin (CR) cements. RESULTS: Marginal openings under 5 kg cementation loads were 74.63 (+/-15.04) for ZOE, 75.98 (+/-18.20) microm for ZPh, 98.58 (+/-22.62) microm for RMGI, and 105.82 (+/-20.07) microm for CR cements respectively; under 10 kg cementation loads they were 57.62 (+/-15.86) microm, 59.55 (+/-15.41) microm, 95.00 (+/-19.52) microm, 101.30 (+/-12.52) microm respectively. Oblique dislodgment forces, measured with a Universal testing machine, were 40.18 (+/- 6.76) N for ZOE, 215.65 (+/-45.79) N for ZPh, 165.43 (+/-19.53) N for RMGI, and 181.54 (+/-30.75) N for CR respectively when crowns were cemented under 5 kg loads. The corresponding values for 10 kg loads were 38.62 (+/-4.19), 274.86 (+/-54.22), 139.70 (+/-21.71), and 160.40 (+/-21.21) respectively. Only zinc phosphate cement produced statistically enhanced resistance when crowns were cemented under 10 kg force (p value = 0.035). CONCLUSIONS: Under the conditions of the present study only crowns cemented with zinc phosphate displayed increased resistance to dislodgment on preparations lacking resistance form.     

Clinical diagnosis of trauma from occlusion and its relation with severity of periodontitis

The purpose of the present study was to determine the reliability of several selected signs of trauma from occlusion and their relations with severity of periodontitis. 32 moderate to advanced chronic periodontitis patients participated in the study. All teeth present were evaluated for various abnormal occlusal contacts, signs of trauma from occlusion, and the severity of periodontitis. Standardized periapical radiographs were also taken for each tooth. The results demonstrated that: (1) no significant difference occurred in probing pocket depth (PD), clinical attachment loss (AL), or percentage of alveolar bone height (BH) between teeth with and without various abnormal occlusal contacts, i.e., premature contacts in centric relation occlusion, non-working contacts in lateral excursions, premature contacts of anterior teeth or posterior protrusive tooth contacts; (2) teeth with either significant mobility, functional mobility, or radiographically widened periodontal ligament space (PDLS) had deeper PD, more AL and lower BH than teeth without these signs, while teeth with pronounced wear or radiographically thickened lamina dura had less AL than teeth without these findings; (3) 2 combined indices, i.e., the trauma from occlusion index (TOI) and the adaptability index (AI), were proposed for the identification of occlusal trauma and the response of periodontium to excessive biting forces in heavy function, respectively; TOI-positive teeth exhibit deeper PD, more AL and less osseous support than TOI-negative teeth; however, AI-positive teeth had less AL and more osseous support than AI-negative teeth; (4) with identical attachment level, TOI-positive teeth had less osseous support than TOI-negative teeth while the magnitude of difference became greater with an increase of attachment loss.     

Femoral pseudo-hernias

Before surgical intervention in the femoral area, doctors should be mindful of two situations in which surgery is not indicated and, in fact, may cause harm. Electronic Publication