镍铬合金烤瓷修复体394件中远期修复效果回顾性分析

目的:了解镍铬合金烤瓷修复体的中远期修复效果。方法:对我科1995年7月～2005年3月具有完整病历记载并能正常复诊的312例(394件)镍铬合金烤瓷修复体的临床资料进行了回顾性分析。结果:镍铬合金烤瓷修复体3年以上成功率为96.2%,5年以上成功率为92.9%,牙龈炎症、松动脱落、瓷崩是镍铬合金烤瓷修复体失败的3种主要表现。结论:为确保镍铬合金烤瓷修复体的中远期疗效,应从适应证的选择、固位体的设计、基牙制备、烤瓷工艺等方面严格把关。     

Conversion of Fused Hip to Total Hip Arthroplasty: Long-Term Clinical and Radiological Outcomes

BackgroundDespite promising results at the mid-term followup, several aspects of conversion of the fused hip to total hip arthroplasty (THA) remain controversial. The aim of this study was to evaluate clinical and radiological outcomes with a minimum 5-year followup in patients who underwent conversion of the fused hip to THA.MethodsFifty-seven patients (59 hips) were evaluated. The Harris Hip Score (HHS), range of motion (ROM), and the Visual Analogue Scale (VAS) were used to assess hip function and low back pain. Subjective satisfaction with surgery and the presence of the Trendelenburg sign was also evaluated. Radiological assessment was performed pre- and postoperatively to evaluate loosening and heterotopic ossification (HO).ResultsAfter a mean followup of 13.0 ± 6.2 years, HHS and VAS significantly improved from 46.0 ± 16.7 to 80.8 ± 18.8 and from 4.4 ± 1.5 to 2.1 ± 1.4 (both P < .001), respectively. Twenty-three patients (40.4%) had a positive Trendelenburg sign, and HOs were found in 29 cases (49.1%). An overall 29.8% complication rate was noted. Smoking habits and rheumatoid arthritis were predictive of Trendelenburg sign (P = .046 and P = .038, respectively). Implant survival rate as the end point was 98.7 ± 1.3% at 5 years, 92.4 ± 3.3% at 10 years, 82.1 ± 5.7% at 15 years, and 73.4 ± 8.0% at 20 and 25 years. A worse cumulative implant survival rate was noted in patients who underwent previous hip surgery, defined as any hip operation before fusion (P = .005).ConclusionConversion of the fused hip to hip arthroplasty provides high levels of hip functionality and satisfaction with surgery at long-term followup. An implant survival rate higher than 70% can be expected 25 years postoperatively.     

A humanised tissue‐engineered bone model allows species‐specific breast cancer‐related bone metastasis in vivo

Bone metastases frequently occur in the advanced stages of breast cancer. At this stage, the disease is deemed incurable. To date, the mechanisms of breast cancer‐related metastasis to bone are poorly understood. This may be attributed to the lack of appropriate animal models to investigate the complex cancer cell–bone interactions. In this study, two established tissue‐engineered bone constructs (TEBCs) were applied to a breast cancer‐related metastasis model. A cylindrical medical‐grade polycaprolactone‐tricalcium phosphate scaffold produced by fused deposition modelling (scaffold 1) was compared with a tubular calcium phosphate‐coated polycaprolactone scaffold fabricated by solution electrospinning (scaffold 2) for their potential to generate ectopic humanised bone in NOD/SCID mice. While scaffold 1 was found not suitable to generate a sufficient amount of ectopic bone tissue due to poor ectopic integration, scaffold 2 showed excellent integration into the host tissue, leading to bone formation. To mimic breast cancer cell colonisation to the bone, MDA‐MB‐231, SUM1315, and MDA‐MB‐231BO breast cancer cells were cultured in polyethylene glycol‐based hydrogels and implanted adjacent to the TEBCs. Histological analysis indicated that the breast cancer cells induced an osteoclastic reaction in the TEBCs, demonstrating analogies to breast cancer‐related bone metastasis seen in patients.     

Extended glaze firings for porcelain-veneered zirconia: Effects on the mechanical and optical behavior

ObjectiveThis study evaluated the effect of dwell time (conventional or extended) and cooling protocol (fast or slow) of self-glaze firings on the mechanical (flexural strength and crack propagation) and optical (color and translucency) properties of a porcelain-veneered zirconia system.MethodsBilayer disc-shaped samples were prepared (Vita VM9 + In-Ceram YZ) and divided according to the final thermal treatment: glaze firing followed by slow cooling (furnace opening at 200 °C) (G-S) or fast cooling (furnace opening at 600 °C) (G-F, manufacturer-recommended protocol), extended glaze firing (15 min of dwell time) followed by slow cooling (EG-S) or fast cooling (EG-F), or no thermal treatment (CTRL). Porcelain roughness (Ra and Rz) was measured before and after glaze firings. Color (ΔE₀₀) and translucency (TP₀₀) alteration were also evaluated. Flexural strength was measured with the piston-on-three-ball test and crack propagation analysis was performed after Vickers indentations. Complementary analyzes of crystalline phase and scanning electron microscopy were carried out.ResultsSignificant effect of dwell time was observed, with extended glaze leading to higher flexural strength and shorter crack lengths. Cracks of EG groups were observed to end in clusters of crystals. Color and translucency changed below perceptibility thresholds. All treatments led to a smoother surface and EG groups reached the lowest Rz values. An extra SiO₂ peak was revealed in control and EG groups. No effect of cooling protocol was found.SignificanceExtended glaze firing was able to improve the resistance to crack initiation and propagation of porcelain-veneered zirconia without clinically perceptible changes in optical properties.     

Ceramic on ceramic hip arthroplasty in fused hips

Background:Most literature in the field of total hip arthroplasty (THA) for fused hips, until date has reported the results of using metal on polyethylene and ceramic on polyethylene bearings. Results of THA using ceramic on ceramic (CoC) bearings in fused hips have not been published in literature. This study reports the results of cementless THA using CoC articulation perfomed in fused hips.Results:Mean Harris hip score improved from 42.4 to 84.2 and mean leg lengthening of 36.6 mm was achieved. In the average 5.4 years (range 2.8-9.1 years) followup there were no cases with osteolysis around acetabular cup and femoral stem. In this study, there was no case of ceramic fracture. There was one case of squeaking.Conclusion:This study suggests that cementless THA performed for fused hips with CoC bearings can provide good early clinical results.     

Formulation of 3D Printed Tablet for Rapid Drug Release by Fused Deposition Modeling: Screening Polymers for Drug Release,Drug-Polymer Miscibility and Printability

The primary aim of this study was to identify pharmaceutically acceptable amorphous polymers for producing 3D printed tablets of a model drug, haloperidol, for rapid release by fused deposition modeling. Filaments for 3D printing were prepared by hot melt extrusion at 150°C with 10% and 20% w/w of haloperidol using Kollidon^® VA64, Kollicoat^® IR, Affinsiol^?15 cP, and HPMCAS either individually or as binary blends (Kollidon^® VA64 + Affinisol^? 15 cP, 1:1; Kollidon^® VA64 + HPMCAS, 1:1). Dissolution of crushed extrudates was studied at pH 2 and 6.8, and formulations demonstrating rapid dissolution rates were then analyzed for drug-polymer, polymer-polymer and drug-polymer-polymer miscibility by film casting. Polymer-polymer (1:1) and drug-polymer-polymer (1:5:5 and 2:5:5) mixtures were found to be miscible. Tablets with 100% and 60% infill were printed using MakerBot printer at 210°C, and dissolution tests of tablets were conducted at pH 2 and 6.8. Extruded filaments of Kollidon^® VA64-Affinisol^? 15 cP mixtures were flexible and had optimum mechanical strength for 3D printing. Tablets containing 10% drug with 60% and 100% infill showed complete drug release at pH 2 in 45 and 120 min, respectively. Relatively high dissolution rates were also observed at pH 6.8. The 1:1-mixture of Kollidon^® VA64 and Affinisol^?15 cP was thus identified as a suitable polymer system for 3D printing and rapid drug release.