从掺混肥料的发展现状谈其国家标准制定的设想

介绍我国掺混肥料行业发展现状,存在的主要问题,提出制定掺混肥料国家标准的设想。     

Bulk and Solution Copolymerization of Butyl Acrylate/Methyl Methacrylate at Elevated Temperatures

A series of bulk and solution (in toluene) copolymerizations of butyl acrylate/methyl methacrylate were performed independently at two laboratories. The runs were at elevated temperatures ranging from 90 to 140 °C conducted to high conversion levels, and samples were characterized for conversion, cumulative copolymer composition and number‐ and weight‐average molecular weights and distribution. Variation of the comonomer feed composition, temperature, and the solvent, initiator and chain transfer agent concentrations was studied. Using a mechanistic model, conversion data were predicted to high conversions using terminal model kinetics at 90 and 115 °C. The copolymer composition data conformed to the terminal kinetic model over the entire temperature range. Solvent effects were reflected by changes in the butyl acrylate rate constants.

Composition vs. conversion. Effect of feed composition for runs at 140 °C.     

Synthesis of polyetherurethanes containing L-serine dipeptide and their use as materials for biomedical films

Prepolymers, which were produced by the polyaddition reaction of polytetramethylene glycol (PTMG) or polyethylene glycol (PEG) and 4,4'-diphenylmethane diisocyanate (MDI) or hexamethylene diisocyanate (HMDI), were chain-extended with a linear dipeptide of L-serine (Z-Ser-Ser-OMe) or a cyclic dipeptide of L-serine [c-(Ser)2] to yield novel polyetherurethanes containing dipeptide segments. The relationship between the surface morphology and the biomedical properties of the film of the novel polyetherurethanes was investigated. The surface of PU(PTMG,Z-Ser-Ser-OMe,MDI) film was smooth, but fibrous structures were developed in the bulk of the film with increasing molecular weight of the PTMG segment. The antithrombogenicity of the film containing the low molecular weight PTMG segment was better than that of the usual polyetherurethane film without the dipeptide segments. The partial hydrolysis of the ester groups involved in the dipeptide segment improved the antithrombogenicity. In the surface and the bulk of PU[PTMG,c-(Ser)2,MDI] film, spherulite structures were developed when the molecular weight of the PTMG segment was high, while single crystals with a length of 3-4 microns were produced when the molecular weight of the PTMG segment was low. The antithrombogenicity of the film containing the high molecular weight PTMG segment was better than that of the usual polyetherurethane film without the dipeptide segments. PU(PTMG/PEG,Z-Ser-Ser-OMe,MDI) film and PU[PTMG/PEG,c-(Ser)2,MDI] film were permeated by uraemic toxins. The permeation was accelerated with increasing water content of the film and decreasing molecular weight of the solute. The oxygen permeability of the film of the polyetherurethane containing the linear or cyclic dipeptide segments was greater than that of polyetherurethane film which does not contain the dipeptide segments.     

大块骨组织体视学研究的图像采集与分析

大块骨组织由于不脱钙切片制作技术难度高,应用体视学对大块骨组织整体形态进行图像定量分析的研究资料较少。随着生物材料、人工金属植入材料在骨科临床的大量应用,如何获取高质量的大块骨组织整体图像,并应用体视学原理进行较为精确的图像分析变成了迫切需要解决的问题。目的:寻求大块骨组织实用和有效的数字图像采集方法,使之应用体视学原理进行较为精确的图像分析。材料与方法:普通玻片上的大组织标本、硬组织切片机切取的不脱钙塑料包埋大块骨组织标本及旋转切割机切取的含金属植入物的塑料包埋磨片标本。分别采用普通显微镜、大视野显微镜、自动显微镜及图像拼接软件采集,同时采用胶片扫描仪、台式背透扫描仪及高分辩数码相机进行采集比较。结果:上述各方法在一定程度均能满足大块骨组织图像采集及体视学分析需求,同时在标本适应性、视野规模、成像质量方面总结出各自优、缺点以及相应技术方法。     

Theoretical and Experimental Evaluation of Flow Pattern of Pharmaceutical Powder Blends Discharged From Intermediate Bulk Containers (IBCs)

The purpose of this study is to assess the prevalence of funnel flow pattern for common pharmaceutical powder blends, upon discharging from modern intermediate bulk containers (IBCs) in drug product manufacturing. The estimation was built upon Jenike’s original radial stress field theory. It was modified to account for the stress-dependence of wall friction angle commonly observed in pharmaceutical powders. A total of 260 flow pattern estimations, based on 20 real-life IBCs and 13 investigational powder blends, were made. The estimated results showed that the mass flow pattern is present in less than 5% of all cases. Funnel flow pattern is clearly prevalent among pharmaceutical powder blends. The prevalence of funnel flow stems from several factors: 1) relatively shallow hopper section shared by all IBCs, 2) the common transition-type geometry, leading to even shallower hopper inclination at the edge of the hopper section, and 3) relatively high wall friction angles resulting from low wall normal stresses. This conclusion was verified through at-scale experiments, by discharging multiple pharmaceutical powder blends from a representative IBC. In general, our study suggests that, unless the powder wall friction can be substantially reduced, pharmaceutical powders are likely to discharge under funnel flow from modern IBCs.     

The Microstructural Evolution and Mechanical Properties of Zr-Based Metallic Glass under Different Strain Rate Compressions

In this study, the high strain rate deformation behavior and the microstructure evolution of Zr-Cu-Al-Ni metallic glasses under various strain rates were investigated. The influence of strain and strain rate on the mechanical properties and fracture behavior, as well as microstructural properties was also investigated. Before mechanical testing, the structure and thermal stability of the Zr-Cu-Al-Ni metallic glasses were studied with X-ray diffraction (XRD) and differential scanning calorimeter. The mechanical property experiments and microstructural observations of Zr-Cu-Al-Ni metallic glasses under different strain rates ranging from 10⁻³ to 5.1 × 10³ s⁻¹ and at temperatures of 25 °C were investigated using compressive split-Hopkinson bar (SHPB) and an MTS tester. An in situ transmission electron microscope (TEM) nanoindenter was used to carry out compression tests and investigate the deformation behavior arising at nanopillars of the Zr-based metallic glass. The formation and interaction of shear band during the plastic deformation were investigated. Moreover, it was clearly apparent that the mechanical strength and ductility could be enhanced by impeding the penetration of shear bands with reinforced particles.     

Advances in osmotic opening of the blood-brain barrier to enhance CNS chemotherapy

The blood-brain barrier (BBB) to water-soluble drugs and macromolecules can be opened in vivo by infusing a hypertonic solution of arabinose or mannitol into the carotid artery for 30 sec. Opening involves widening of tight junctions between endothelial cells of the cerebrovasculature and is mediated by endothelial cell shrinkage, vascular dilatation associated with removal of water from brain, and modulation of the contractile state of the endothelial cytoskeleton and junctional proteins by increased intracellular calcium. A 10-fold increase in BBB permeability to intravascular substances, lasting about 10 min following osmotic exposure, reflects both increased diffusion and bulk fluid flow from blood into brain. Furthermore, recent evidence indicates that the duration of peak BBB opening can be extended beyond 30 min, by pre-treatment with a Na⁺/Ca²⁺ channel blocker. In experimental animals, the osmotic method has been used to grant wide access to brain of water-soluble drugs, peptides, antibodies, boron compounds for neutron capture therapy, viral vectors for gene therapy and enzymes. Ongoing multi-centre clinical studies suggest that the method, when used with intra-arterially administered anticancer drugs, can prolong survival in patients with malignant brain tumours, with minimal morbidity. However, controlled clinical trials are critical to see if the osmotic procedure with intra-arterial drugs enhances survival in brain tumour patients compared with intra-arterial drug alone.     

Controlling Morphological Parameters of Anodized Titania Nanotubes for Optimized Solar Energy Applications

Anodized TiO₂ nanotubes have received much attention for their use in solar energy applications including water oxidation cells and hybrid solar cells [dye-sensitized solar cells (DSSCs) and bulk heterojuntion solar cells (BHJs)]. High surface area allows for increased dye-adsorption and photon absorption. Titania nanotubes grown by anodization of titanium in fluoride-containing electrolytes are aligned perpendicular to the substrate surface, reducing the electron diffusion path to the external circuit in solar cells. The nanotube morphology can be optimized for the various applications by adjusting the anodization parameters but the optimum crystallinity of the nanotube arrays remains to be realized. In addition to morphology and crystallinity, the method of device fabrication significantly affects photon and electron dynamics and its energy conversion efficiency. This paper provides the state-of-the-art knowledge to achieve experimental tailoring of morphological parameters including nanotube diameter, length, wall thickness, array surface smoothness, and annealing of nanotube arrays.     

Modification of poly(ether urethane)elastomers by incorporation of poly(isobutylene)glycol. Relation between polymer properties and thrombogenicity

Non-polar hydrophobic poly(isobutylene)glycol (PIBG) was substituted for poly(tetramethylene ether)glycol (PTMEG) in poly(ether urethanes) based on 4,4'-methylenebis-(phenylisocyanate) (MDI) and 1,4-butanediol (BD) as chain extender. Two series of polyurethanes differing in their soft segment length, polymer composition, and hard segment content were studied by dynamic mechanical analysis (DMA) and static, as well as dynamic, contact angle measurements. The thrombogenicity of these polymers was characterized by studying the adhesion and activation of platelets using ELISA for GMP 140 and fluorescence microscopy. It was found by DMA that in PIBG-containing polyurethanes (PUE) exist soft domains containing hard segments, strictly separated hard segment domains, and hard segments partially mixed with soft segments. Contact angle measurements revealed that 25% PIBG or even less, are sufficient for a remarkable enrichment of these non-polar soft segments on the polymer surface. The platelet adhesion/activation on these materials was demonstrated to increase with the rise in hard segment content, as well as with an enhancement of the PIBG content. However, comparison of PIBG-containing PUE with medical applied polypropylene and pellethane expressed that PUE with PIBG content equal or less 25% have excellent haemocompatibility.     

Synthesis and Photovoltaic Performance of a [1,2,3]Triazolo[4,5‐g]quinoxaline‐Based Low‐Bandgap Polymer

A narrow‐bandgap conjugated polymer, PFDTBTzQ‐2OC1, is prepared by alternating [1,2,3]triazolo[4,5‐g]quinoxaline and 9,9‐didodecyl‐fluorene. With a bandgap of 1.63 eV, this polymer has wide absorption ranging from 300–760 nm in film. Bulk heterojunction solar cells fabricated by blending PFDTBTzQ‐2OC1 with [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester exhibit a maximum power conversion efficiency of 1.31%, with a short‐circuit current density of 1.98 mA cm^–2, an open‐circuit voltage of 0.74 V, and a fill factor of 0.47.