凉血通瘀方干预高血压大鼠急性脑出血模型对脑组织中差异miRNA表达的影响＊

目的 研究凉血通瘀方对高血压大鼠急性脑出血模型脑组织miRNA表达的影响，对差异表达的miRNA靶基因进行分析，探索凉血通瘀方可能的药效机制。方法 将自发性高血压大鼠随机分成对照组（B）和实验组（C）。适应性饲养一周后，C组灌胃凉血通瘀方，B组灌胃等体积生理盐水，连续5天，每天1次。构建脑出血模型后收集脑组织，借助全转录组测序技术获得miRNA表达量，与miRBase数据库比对获取已知miRNA，使用miRDeep2预测新miRNA。差异分析软件为DESeq2，筛选阈值为|log₂FC| ≥1 并且P <0.05。对显著差异表达的miRNA进行靶基因预测，对靶基因进行GO功能、KEGG通路富集和PPI网络分析。结果 实验组和对照组对比，共发现21个显著差异表达的miRNA，上调有9个，下调有12个，共预测得到1243个有统计学意义的靶基因。GO富集分析发现，生物过程中突触囊泡分泌的调节、神经递质分泌的调节和神经递质运输的调节占前三位，神经元投射终点、全膜、质膜区域和细胞投射则是主要的细胞成分。分子功能分别为小GTPase绑定、底物特异性跨膜转运蛋白活性和离子跨膜转运体活性。通路分析结果显示，靶基因在癌证通路、pI3K-Akt信号通路、人类乳头瘤病毒感染、神经活性配体-受体相互作用和MAPK通路等分布广泛。采用STRING网站和Cytoscape软件，根据MCC算法筛选出ADRA2C、CASR、CCL28、CCR1、DRD2、GNAT3、GRM2、DYNC1LI1、GABBR1、GNAI1等核心靶基因。结论 凉血通瘀方对脑出血急性期鼠脑组织内miRNA的表达有重要影响；显著差异表达miRNAs可能通过靶向核心基因调控凉血通瘀方干预急性脑出血的病理过程及预后。     

Effect of Day Optimizing Throughput (Dot) Knee Software Implementation on Magnetic Resonance Imaging Workflow Efficiency

PurposeAttempts by magnetic resonance (MR) manufacturers to help imaging centres improve patient throughput has led to the development of more automated acquisition. This software is capable of customizing individual scan alignment; potentially improving imaging efficiency and standardizing protocols. However, substantial investments are required to introduce such systems, potentially deterring their widespread application. This study assessed the implementation costs and reduction in examination durations for automated knee MR imaging (MRI) software.Materials and MethodsResearch activities were performed at a community-based academic centre on a 3-Tesla (3-T) system using Siemens' Day Optimizing Throughput (Dot) knee software. Examination acquisition times were extracted from the system before and after software implementation. Fiscal year 2012/13 finances were used to determine the average hourly cost of MRI utilization. Costs associated with automated software implementation were also calculated. Finally, the number of knee scans required to achieve a positive return on investment using the software was established.Results and DiscussionThe mean (standard deviation, sample size) pre- and post-Dot software scan times were 23.20 (4.18, n = 266) and 21.94 (4.51, n = 59) minutes, respectively, for a routine knee scan and 11.88 (1.60, n = 74) and 11.24 (1.51, n = 27) minutes, respectively, for a fast knee scan. The overall weighted average resulted in a 64-second time savings per automated knee examination. This negligible time savings would be extremely difficult to make use of clinically. Dot simplified 29 unique knee protocols to two, improving the consistency of knee examinations. Current Dot software is not compatible with all patients and therefore has limitations that are a concern among MR technologists.ConclusionAdoption of automated knee systems could assist in standardizing protocols; however, the cost of implementation and difficulty in modifying patient scheduling to reflect the minimal time savings would make a financial return unlikely to occur at small- and medium-sized institutions.     

H型高血压患者舌面诊图像颜色特征参数分析＊

目的 分析H型高血压患者的舌面诊图像颜色参数特征，探讨H型高血压患者的舌诊、面诊变化规律。方法 运用上海中医药大学自行研制的Smart TCM-1型中医舌面一体仪，采集高血压患者舌面诊图像，提取特征参数，分析健康对照组、H型高血压组与非H型高血压组患者舌面颜色参数特征。结果 ①在舌色各项参数中，H型高血压组舌尖部R值、B值、V值均显著小于健康对照组（P < 0.01）；非H型高血压组舌尖部B值显著小于健康对照组（P < 0.01），S值较健康对照组显著增大（P < 0.05）；H型高血压组舌尖部R、V值均明显小于非H型高血压组（P < 0.05）。在舌苔各项参数中，H型高血压组舌中H值、V值均明显小于健康对照组（P < 0.05）；非H型高血压组舌中V值、舌右V值均显著小于健康对照组（P < 0.01）；H型高血压组舌中H值明显小于非H型高血压组（P < 0.05），右侧舌苔S值明显大于非H型高血压组（P < 0.05）。②H型高血压组面色参数鼻G值、下颌G值、口唇R值、口唇V值均明显小于健康对照组（P < 0.05）；非H型高血压组前额H值、目眶H值、脸颊H值、鼻H值、下颌H值、整体H值均明显大于健康对照组（P < 0.05）；H型高血压组前额H值、目眶G值、目眶H值、脸颊H值、鼻G值、鼻H值、下颌R值、下颌G值、下颌H值、下颌V值、口唇R值、口唇G值、口唇V值、整体R值、整体G值、整体H值、整体V值均明显小于非H型高血压组（P < 0.05）。结论 H型高血压患者苔色偏黄，以舌中部为主，且舌右侧黄苔积聚较明显；H型高血压患者面色为黄中带红，口唇、下颌部更为晦暗。H型高血压患者的舌、面诊特征参数的变化，与高血压病阳亢湿盛病机相符。     

Tears at the myotendinous junction of the infraspinatus: Ultrasound findings

PurposeTears involving the myotendinous junction (MTJ) of the infraspinatus (IS) have been recently described on MRI. These occur centrally in the muscle belly, and are not associated with full thickness tears of the distal infraspinatus tendon. They also induce a rapidly progressive fatty infiltration of the muscles and amyotrophy. The purpose of this study is to assess the accuracy of ultrasonography in diagnosing MTJ tears of the infraspinatus and to describe the usual ultrasonographic appearance compared with MRI.Materials and methodsRetrospective study of 2403 US examinations of the shoulder (over 5 years). Fifteen patients with a reported suspicion of infraspinatus MTJ tears were included. MRI examination was available in all cases, CT arthrography in 13 cases, and one patient underwent surgical confirmation.ResultsAll patients were sent for an ultrasound for suspect lesion of the tendons of the rotator cuff, with posterior pain in the infraspinatus fossa. All cases seen on ultrasonography were confirmed on MRI. CT arthrography confirmed the absence of tear of the IS tendon in all cases and did not reveal the MTJ tears. Two signs appeared to us as being of special interest: the “tadpole sign” on longitudinal views, and the “black eye sign” on sagittal views. The proximal retraction of the tendon at the MTJ is the anatomical explanation of both signs.ConclusionTears at the myotendinous junction of the infraspinatus are rare but can be diagnosed on US examination, provided that the sonographer pays attention to the infraspinatus fossa especially in cases of normality of the distal tendinous cuff.     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

Measurement of xenon diffusing capacity in the rat lung by hyperpolarized 129Xe MRI and dynamic spectroscopy in a single breath-hold.

We used the dual capability of hyperpolarized 129Xe for spectroscopy and imaging to develop new measures of xenon diffusing capacity in the rat lung that (analogously to the diffusing capacity of carbon monoxide or DLCO) are calculated as a product of total lung volume and gas transfer rate constants divided by the pressure gradient. Under conditions of known constant pressure breath-hold, the volume is measured by hyperpolarized 129Xe MRI, and the transfer rate is measured by dynamic spectroscopy. The new quantities (xenon diffusing capacity in lung parenchyma (DLXeLP)), xenon diffusing capacity in RBCs (DLXeRBC), and total lung xenon diffusing capacity (DLXe)) were measured in six normal rats and six rats with lung inflammation induced by instillation of fungal spores of Stachybotrys chartarum. DLXeLP, DLXeRBC, and DLXe were 56 +/- 10 ml/min/mmHg, 64 +/- 35 ml/min/mmHg, and 29 +/- 9 ml/min/mmHg, respectively, for normal rats, and 27 +/- 9 ml/min/mmHg, 42 +/- 27 ml/min/mmHg, and 16 +/- 7 ml/min/mmHg, respectively, for diseased rats. Lung volumes and gas transfer times for LP (TtrLP) were 16 +/- 2 ml and 22 +/- 3 ms, respectively, for normal rats and 12 +/- 2 ml and 35 +/- 8 ms, respectively, for diseased rats. Xenon diffusing capacities may be useful for measuring changes in gas exchange associated with inflammation and other lung diseases.