Prospective characterization of incident hepatic steatosis in pediatric and adolescent patients after total pancreatectomy with islet autotransplantation

BackgroundHepatic steatosis has been described as a common finding in adults following total pancreatectomy with islet autotransplantation (TPIAT) but it is unknown if this occurs in children and adolescents.ObjectivesTo define the frequency of post-TPIAT hepatic steatosis in a sample of children and adolescents and to identify clinical predictors of incident steatosis post-TPIAT.MethodsIn this prospective study, consecutive participants at least 1-month post-TPIAT underwent a liver MRI with proton density fat fraction (PDFF) and blood draw at our pediatric academic medical center between April 2021 and January 2022. Comparison clinical pre-TPIAT liver MRI or ultrasound and insulin use and graft function data were extracted from the medical record. T-tests were used for the comparison of means across continuous variables between participants with and without post-TPIAT steatosis.ResultsA total of 20 participants (mean: 13 ± 4 years; 12 female) were evaluated. Mean liver PDFF at research MRI was 7.4 ± 6.2% (range: 2–25%). Seven participants (35%) had categorical hepatic steatosis (PDFF>5%) post-TPIAT, five of whom had pre-TPIAT steatosis, reflecting a 13% (2/15; 95% CI: 2–40%) incidence of post-TPIAT steatosis. Participant characteristics were not significantly different between subgroups with and without post-TPIAT steatosis. Mean PDFF at research MRI was not different between graft function subgroups (7.5% optimal/good vs. 7.3% marginal/failure; p = .96).ConclusionOur study shows a moderate prevalence but low incidence of hepatic steatosis in a small sample of children and adolescents post-TPIAT. This study raises questions about a causal relationship between TPIAT and hepatic steatosis.     

The role of National Immunization Technical Advisory Groups (NITAG) in strengthening health system governance: Lessons from three middle-income countries—Argentina,Jordan, and South Africa (2017–2018)

IntroductionToward the Global Vaccine Action Plan 2020 goal, almost 90% of countries have established a National Immunization Technical Advisory Group (NITAG). However, little is known about NITAG's contributions to governance.MethodsIn 2017–2018, a two-step, qualitative retrospective study was conducted. Jordan (JO), Argentina (AR), and South Africa (SA) were selected owing to government-financed NITAGs from middle-income countries (MICs), geographic diversity, and a vaccine introduction with NITAG support. Country case studies were developed, collecting data through desk review and face-to-face key informant interviews (KIIs) from Ministry of Health (MoH) and NITAG. Case studies were analyzed together, to assess governance applying the European Observatory on Health Systems and Policies framework focusing on transparency, accountability, participation, integrity, and policy capacity (TAPIC).ResultsDocument review and 53 KII (22 AR, 20 SA, 11 JO) showed NITAGs played a pivotal role as advisors promoting a culture of evidence-informed policies. NITAGs strengthened governance, although practices varied among countries. Meetings were conducted behind-closed-doors, participation restricted to members, only in one country agendas, and recommendations were public (AR). To increase participation, policy capacity, and transparency, countries considered adding experts in communications, advocacy, and economics. AR and SA contemplated including community members. NITAGs functioned autonomously from the government, with no established internal or external monitoring or supervision. NITAG meeting minutes allowed the review of integrity, adherence to terms of reference, standard operating procedures, and conflict of interest (CoI). For the most part, NITAGs abided by their mandates. Significant issues were related to the level of MoH support and oversight of CoI declaration and documentation.ConclusionsSystematically implementing governance approaches could improve processes, better tailor policies, and implementation. The long-term survival and resilience of NITAGs in these countries showed they play a significant role in strengthening governance. Lessons learned could be useful to those promoting country-driven evidence-informed decision-making.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

Polyethylene in knee arthroplasty: A review

Polyethylene (PE) has been used extensively in knee arthroplasty since the mid 20th century. Progress in material manufacturing and processing has led to newer polyethylenes over last few decades with different material properties. It has been established that PE wear in knee arthroplasty causes particle induced osteolysis which is the main reason for late failure and requires revision surgery. Although there are various causes of wear, the properties of PE have long been a matter of investigation as a contributory factor. The advent of newer highly cross linked PE has been shown to improve wear rates in hip arthroplasty but the benefits have not been shown to be of the same degree in knee arthroplasty. The laboratory and clinical studies so far are limited and slightly conflicting in their conclusions. The risks of using highly cross linked PE in knee arthroplasty include tibial post fracture, disruption of locking mechanism, liner fracture which can lead to increased wear and osteolysis. The current evidence suggests that highly cross linked polyethylenes should be used with caution and only considered in younger active patients. The results of a recently completed randomized trial to compare the conventional with high molecular weight PE in knee arthroplasty are awaited.     

Identification and evaluation of antioxidants in Japanese parsley

Two cultivars of Japanese parsley were harvested in different seasons; their antioxidant capacities were evaluated by oxygen radical absorbance capacity (ORAC) methods, and the contents of hydrophilic and lipophilic antioxidants were compared. Japanese parsley possessed potent antioxidant capacities both in hydrophilic and lipophilic extracts when evaluated by ORAC methods. LC/MS/MS analyses revealed that chlorogenic acid and four kinds of quercetin glycosides were major antioxidants in the hydrophilic extract. Lutein was the main contributor to the antioxidant capacity of the lipophilic extract. Antioxidant capacities of the hydrophilic extracts of both cultivars tended to be higher in winter because of the increase in the contents of chlorogenic acid and quercetin glycosides. An obvious trend in the lipophilic antioxidant capacities or lutein contents was not observed irrespective of the cultivar.     

Anatomically contoured large femoral heads can reduce iliopsoas impingement: A cadaver verification study

While use of large heads in total hip arthroplasty (THA) continues to grow, concerns have been raised regarding anterior hip pain resulting from impingement of the prosthetic head against soft-tissues like the iliopsoas. To address these concerns, a new anatomically contoured head (ACH) was developed. In this study cadaver tests were utilized to show that iliopsoas impingement/tenting caused by conventional heads is significantly relieved with the more rounded and reduced distal profile of the ACH. Thus, the ACH implant may be able to decrease the risk of soft-tissue impingement with conventional heads, particularly in the smaller hip.     

Anatomic vs. reverse shoulder arthroplasty for glenohumeral osteoarthritis with intact rotator cuff: a retrospective comparison of patient-reported outcomes using the systems outcomes database with up to 5-year follow-up

BackgroundThe growing enthusiasm for the use of reverse shoulder arthroplasty (RSA) in the treatment of primary glenohumeral osteoarthritis (GHOA) with an intact rotator cuff is based on data derived from single-center studies with limited generalizability and follow-up. This study compared patient-reported outcomes (PROs) between RSA and total shoulder arthroplasty (TSA) for the treatment of primary GHOA with up to 5-year follow-up and examined temporal trends in the treatment of GHOA between 2012 and 2021.MethodsA retrospective review was performed on patients with primary GHOA undergoing primary arthroplasty surgery from the Surgical Outcomes System global registry between 2012 and 2021. PROs including the American Shoulder and Elbow Surgeons (ASES) score, Single Assessment Numeric Evaluation (SANE) score, and visual analog scale (VAS) for pain were compared between RSA and TSA at 1, 2, and 5 years postoperatively.ResultsA total of 4451 patients were included, with 2693 (60.5%) undergoing TSA and 1758 (39.5%) undergoing RSA. Both RSA and TSA provided clinically excellent outcomes at 1 year postoperatively (ASES: 80.8 ± 17.9 vs. 85.9 ± 15.2, respectively; SANE: 74.8 ± 24.7 vs. 79.5 ± 22.9; VAS pain: 1.3 ± 2.0 vs. 1.1 ± 1.7; all P < .05) that were maintained at 2 years (ASES: 81.3 ± 19.3 vs. 87.3 ± 14.9; SANE: 74.8 ± 26.2 vs. 79.7 ± 24.7; VAS pain: 1.3 ± 2.1 vs. 1.0 ± 1.6; all P < .05) and 5 years (ASES: 81.7 ± 16.5 vs. 86.9 ± 15.3; SANE: 71.6 ± 28.5 vs. 78.2 ± 25.9; VAS pain: 1.0 ± 1.7 vs. 1.0 ± 1.7; all P < .05), with statistical significance favoring TSA. After controlling for age and sex, there was an adjusted difference of 4.5 units in the ASES score favoring TSA (P = .005) at 5 years postoperatively but no differences in adjusted SANE (P = .745) and VAS pain (P = .332) scores. The use of RSA for GHOA grew considerably over time, from representing only 17% of all replacements performed for GHOA in 2012 to nearly half (47%) in 2021 (P < .001).ConclusionRSA as a treatment for GHOA with an intact rotator cuff seems to yield PROs that are largely clinically equivalent to TSA extending to 5 years postoperatively. The observed statistical significance favoring TSA appears to be of marginal clinical benefit based on established minimal clinically important differences and may be a result of the large sample size. Further research using more granular clinical data and examining differences in range of motion and complications is warranted as it may change the value analysis.