比较手术夹闭和介入栓塞治疗颅内未破裂动脉瘤安全性和有效性的Meta分析

目的比较手术夹闭和介入栓塞治疗颅内未破裂动脉瘤的安全性和有效性。方法计算机检索1990至2018年颅内未破裂动脉瘤的所有临床对照研究。两名研究员分别纳入研究、提取数据、质量评价并应用Rev Man5. 0软件进行数据处理。结果最终纳入21篇文献,病例数109114例。Meta分析结果提示:手术夹闭组动脉瘤闭塞率为88. 2%,平均住院时间7. 7天,均高于介入栓塞组的65. 3%和4. 1天,P 0. 05。介入组患者的短期死亡率和致残率分别为0. 61%和2. 1%,均低于手术组的1. 27%和4. 7%,P 0. 05。介入组患者的1年期死亡率和致残率(2. 5%、2. 5%)均与手术组(2. 2%、1. 8%)无明显差异,P 0. 05。漏斗图未发现发表偏倚。敏感性分析结果一致。结论介入栓塞相比于手术夹闭可缩短患者的住院时间,降低患者的短期不良预后发生率。但是动脉瘤的闭塞率较低,1年期预后与手术夹闭无明显差异。据此推测手术夹闭患者的长期预后可能要好于介入栓塞,手术夹闭更适合于年轻患者。     

Increased hospital costs are associated with low skeletal muscle mass in patients undergoing elective open aortic surgery

Objective

Low psoas muscle area is shown to be an indicator for worse postoperative outcome in patients undergoing vascular surgical. Additionally, it has been associated with longer durations of hospital stay in patients with cancer who undergo surgery and subsequently greater health care costs in Europe and the United States. We sought to evaluate this effect on hospital expenditure for patients undergoing vascular repair in a health care system with universal access.

Who should do endovascular repair of complex aortic aneurysms and how should they do them?

BackgroundCure of aneurysms which involve the aorta at the level of the visceral arteries and the thoracoabdominal segment remains a considerable surgical enterprise with a relatively high mortality and morbidity despite improvements of the surgical procedure and anesthetic technique. Fenestrated and branched endovascular stent grafts are currently available offering an attractive less invasive option especially for most frail patients. These grafts are relatively recent, technically more demanding to insert than the current stent graft for infrarenal aneurysm and besides, given the relative low frequency of the disease, they are much less used by practitioners. Thus, unconditional widespread of this sophisticated technique may not necessarily benefit patients.MethodsWe reviewed our experiences and articles regarding this concern, 1) who should perform this new technique and 2) in what kind of setting.ConclusionBased on the combined complexities of 1) patients selection, 2) proper planning and manufacturing of the graft, 3) the need for outstanding imaging and operating facilities, 4) and the required endovascular skill of physicians involved in the procedure, we feel that only highly specialized centers should be allowed to perform this complex procedure.     

Factors influencing development of residual stresses during crystallization firing in a novel lithium silicate glass-ceramic

ObjectiveDevelopment of residual stresses is a potential source of premature fractures in glassy materials, being of special interest in novel lithium silicate glass-ceramics that require a crystallization firing to achieve their final mechanical properties. The aim of this work was to assess the influence of various firing tray systems and the application of different cooling protocols on the development of residual stresses in Suprinity PC crowns. Their effect on the in vitro lifetime of the restorations was also studied.MethodsThirty crowns were milled out of Suprinity PC blocks and crystallized using one of five different commercial firing tray systems (n = 6). Samples in each group were cooled following a fast (FC = 5.5 °C/s), a slow (SC = 0.4 °C/s) or the manufacturer’s reference cooling (REF ). Obtained crowns were sagittally or transversally sectioned and the magnitude and distribution of residual stresses was determined using the light birefringence method. Extra crowns of three of the subgroups (n = 8) were produced and submitted to chewing simulation for 10⁶ cycles or until fracture ensued.ResultsAverage residual stresses ranged between 0 and 1.5 MPa (peaks of 5 MPa). Highest stress magnitudes were observed at the support areas of groups using firing pins, leading to thermal cracks in FC samples and premature failures in the REF subgroup. The use of fibrous pads and firing pastes limited the development of residual stresses, whereas application of SC regimes extended the lifetime of the restorations.SignificanceDevelopment of residual stresses during crystallization firing in lithium silicate glass-ceramics results critical for their mechanical performance and should be therefore avoided by ensuring a homogenous cooling of the structures.     

牙冠延长术在残根残冠修复中的临床疗效

目的评价牙冠延长术在牙体缺损达龈下的残根残冠修复中的临床疗效。方法自2004年5月至2005年6月,对32例患者的36颗牙体缺损达龈下的患牙,术前按断端位于龈下最深距离分为A组(20颗患牙,距离<3.0mm)和B组(16颗患牙,3.0mm≤距离≤4.0mm),均采用牙冠延长术暴露龈下牙体断面,术后6周行桩冠修复。分别记录和比较手术前、后牙周探诊深度(PD)、菌斑指数(PLI)、龈沟出血指数(SBI)和牙齿松动度,以观察临床疗效。结果术后随访患者6个月,两组病例术后6周牙体断端均暴露较好、龈缘颜色正常,术后修复效果有效率为100%,满意率为77.78%。A组术后无松动,修复效果满意;B组术后50.00%出现Ⅰ度松动,修复效果欠佳,两组修复效果比较差异有显著意义(P<0.05)。术后各阶段两组的PD、PLI、SBI均明显优于术前(P<0.05),但两组术后牙周指数比较差异无显著意义(P>0.05)。结论牙冠延长术有利于残根残冠的保存和修复,但要注意适应证的选择。     

颅内动脉瘤的血管内栓塞治疗

目的探讨应用电解可脱性弹簧圈(GDC)栓塞治疗颅内动脉瘤的临床效果。方法2002年6月-2004年6月我们采用GDC栓塞颅内动脉瘤126例(其中4例有2个动脉瘤,共130个)。前交通动脉瘤42个,后交通动脉瘤53个,颈内动脉瘤6个,大脑中动脉瘤10个,大脑后动脉瘤8个,大脑前动脉瘤6个,小脑后下动脉瘤2个;基底动脉瘤3个。按Hunt-Hess分级:Ⅰ级38例,Ⅱ级54例,Ⅲ级23例,Ⅳ级11例。必要时辅以篮筐技术、重塑技术、支架技术、双微导管或连环技术、蚕食技术。结果成功栓塞126例动脉瘤,其中103例为100%栓塞,21例为95%,2例为90%。12例在栓塞后6~18个月进行造影随访,所栓塞动脉瘤均未见复发征象。结论GDC栓塞颅内动脉瘤是安全、有效和微创的治疗手段。联合运用多种栓塞技术有助于减少术后并发症,提高治愈率。