Bonding to industrial indirect composite blocks: A systematic review and meta-analysis

ObjectiveThe aim of this systematic review and meta-analysis was to evaluate the effect of surface conditioning methods on the bond strength of industrial indirect composite blocks (ICs).MethodsBased on the PICOS strategy, the Medline via PubMed, Embase and Web of Science (ISI – Web of Knowledge) electronic databases were searched for peer-reviewed articles in both English and Chinese, with no publication year limit. In vitro studies evaluating the effects of surface conditioning on the bond strength of ICs were selected. The meta-analysis was conducted to calculate the mean difference between surface-conditioned ICs and unconditioned controls. Subgroup analysis was performed to evaluate the different surface conditioning methods, separately for polymer-infiltrated ceramic network (PICN) material and the ICs with dispersed fillers (ICDFs). Meta-analyses were performed with a random-effects model at a significance level of 0.05.Results and SignificanceFrom 802 relevant studies, 25 were selected for full-text analysis. Nineteen studies were eligible for inclusion in this systematic review, whereas 9 studies were included in the meta-analysis. A manual search of the principal periodicals specific to the area resulted in no additional articles. The meta-analysis indicated a significant difference in bond strength between the surface-conditioned ICs and controls under both non-aged and aged conditions. The combination of mechanical and chemical conditioning yielded the highest bond strength of ICs. This meta-analysis suggests that chemical etching followed by a universal primer and alumina air abrasion followed by a silane coupling agent could be considered the best strategy for optimizing the bond strength of PICN materials and ICDFs under aged conditions, respectively.     

碳纤维根管桩的研制

目的研究高强度碳纤维增强复合树脂根管桩的加工成型工艺.方法用湿法制备碳纤维预浸料,在预成型模具中预成型,然后在成型模具中经特殊的工艺进行成型,最后用车床加工成预定形状的桩钉;并测试其弯曲强度、剪切强度和碳纤维含量.结果随着碳纤维含量的增加,根管桩的弯曲强度和剪切强度均逐渐增加.碳纤维含量达到67.13%时,弯曲强度和剪切强度分别达到406MPa和653.86MPa.结论高强度的碳纤维根管桩可以满足临床需要.     

Adhesive fragment reattachment after orthodontic extrusion: a case report

Abstract –  In the treatment of crown fractures, adhesive fragment reattachment provides a good alternative to other restorative techniques, offering several advantages. The present paper reports a case in which the treatment of a cervical crown fracture was accomplished by reattaching the tooth fragment with a flowable resin composite. Orthodontic root extrusion was performed with a modified Hawley appliance prior to fragment reattachment. The clinical and radiographic results after 2.5 years were successful.     

芳香PET树脂母粒的研制

通过丙烯酸和丙烯酸正丁酯溶液共聚合，得到丙烯酸－丙烯酸正丁酯共聚物，该树脂与环氧氯丙烷反应后再与PET树脂切片继续反应，可使PET树脂切片表面形成聚丙烯酸酯自膨润型吸油网络结构，将表面具有聚丙烯酸酯自身膨润型吸油网络结构的PET树脂切片（简称为留香剂）在油溶性香精中浸泡，香精就被吸附在留香剂表面，即得到芳香PET树脂母粒。用SEM观察了母粒的表面结构形态。     

HZ818树脂在紫杉醇初分离工艺中的应用

采用HZ818大孔吸附树脂对红豆杉浸膏中的紫杉醇成分进行吸附和洗脱试验，同时利用液质联用进行分析检测，确定了其最佳工艺参数。结果表明，HZ818树脂对紫杉醇有良好的吸附分离效果。优化工艺条件为：样品溶于体积分数40％甲醇，以1．5mL／min过柱，体积分数75％甲醇淋洗，体积分数85％甲醇以0．5mL／min洗脱，紫杉醇的质量分数从原浸膏中的1．02％提高到8．1％，回收率达98．6％。     

多官能度活性橡胶增韧环氧树脂的研究：Ⅲ.三元共混增韧环氧树脂

本文研究了双酚A对多官能度环氧基和羧基聚丙烯酸正丁酯橡胶增韧环氧树脂的影响。结果表明,加入双酚A,拉伸断裂能有大幅度提高,同时不降低弹性模量。这可能是由椽胶提高断裂伸长与双酚A提高屈服应力产生协同效应的结果。对羧基橡胶增韧的三元共混体系,拉伸断裂能随羧基官能度上升而增加。断裂面的形态研究表明,由于羧基橡胶与双酚A的酯化反应,大大减少了羧基橡胶聚集对增韧的不利影响。     

橡胶活性官能团对增韧环氧树脂动态力学性能的影响

用动态扭摆法测试聚丙烯酸丁酯橡胶增韧环氧树脂的动态力学行为,研究在环氧树脂低固化度和高固化度时,橡胶活性官能团种类(环氧基官能团与羧基官能团)和数量(官能度)对其影响。研究体系中橡胶玻璃化转变温度(Tg)的移动大小,与橡胶和基体树脂健合程度之间的关系。     

新型粘结固定桥临床应用初步观察

目的 观察一种用于牙列缺损永久修复的新型粘结固定桥的临床效果。方法 选择有单个或多个牙缺失的病人，进行固定桥基牙的牙周和特定的牙体预备。然后制作固定桥并试戴，用4－META／MMA－TBB树脂粘结剂粘结固定桥。结果 267例（304个）固定桥病人经二年以上随访，发现192个前牙桥中只有1个，112个后牙桥中只有2个脱落，其余固定桥稳定、功能良好。结论 采用树脂粘接技术，结合基牙的机械预备，能较好地克服3／4冠桥、桩冠桥和嵌体桥的缺陷，使之成为良好永久的修复体。     

胜利黄岛原油深度电脱盐的研究：Ⅰ.破乳剂组成的影响

根据胜利黄岛原油的性质，在筛选了几十种破乳剂的基础上，选择了酚醛树脂和环氧环烷，环氧乙烷的嵌段共聚物作破乳剂，探讨了破乳剂组成对原油脱水，脱盐以及界面张力的影响，通过静态脱盐，脱水试验，得到了适合黄岛原油的最佳破乳剂组成。