Prevalence of proximal tibia vara in Indonesian population with knee osteoarthritis

BackgroundProximal tibia vara has drawn interest since the concept of constitutional varus was introduced. Proximal tibia vara is a condition where the knee varus tilt the tibia condyle medially and shift the tibial articular surface medially. This condition affects medial proximal tibial angle measurements and the placement of the tibial implant in knee replacement surgery. Thus, it challenged the neutral knee arthroplasty alignment target because some people may present a proximal tibia vara. This study assesses the prevalence of the proximal tibia vara and the correlation to knee osteoarthritis grade.MethodsThis retrospective study was carried out from January 2021 to June 2021. Eighty-five limbs were included with the following inclusion criteria: knee osteoarthritis patients who received a long view lower extremity radiograph. The exclusions criteria were (1) patients who had undergone arthroplasty and lower extremity surgery before and (2) valgus knee deformity. The outcomes in this study were HKAA, MAD, TAD, MPTA, PTRP, LDFA, and PTS. Intraclass correlation (ICC) using two-way mixed was used to assess the reproducibility of the radiographic parameters. Multiple logistic regression was used to evaluate the correlation between knee osteoarthritis grade and radiographs parameters (MAD and TAD).ResultA total 85 limbs from 52 patients were assessed in this study. Proximal tibia vara was found in 18 knees (21%.). The logistic regression was performed to assess the correlation between the severity of the knee osteoarthritis and radiographic parameters (MAD, TAD, LDFA, and PTS) with an overall p-value < 0.001 and pseudo-R² = 0.29.ConclusionA significant portion of patients with knee osteoarthritis have proximal tibia vara, and it is a pre-existing condition. Since the pre-existing proximal tibia vara affects preoperative measurements, a long-standing lower extremity x-ray is recommended to be obtained as part of knee replacement preparation.     

Effectiveness,Patient Satisfaction,and Cost Reduction of Virtual Joint Replacement Clinic Follow-Up of Hip and Knee Arthroplasty

BackgroundTotal hip and knee arthroplasties are increasingly performed operations, and routine follow-up places huge demands on orthopedic services. This study investigates the effectiveness, patients’ satisfaction, and cost reduction of Virtual Joint Replacement Clinic (VJRC) follow-up of total hip arthroplasty and total knee arthroplasty patients in a university hospital. VJRC is especially valuable when in-person appointments are not advised or feasible such as during the COVID-19 pandemic.MethodsA total of 1749 patients who were invited for VJRC follow-up for knee or hip arthroplasty from January 2017 to December 2018 were included in this retrospective study. Patients were referred to VJRC after their 6-week postoperative review. Routine VJRC postoperative review was undertaken at 1 and 7 years and then 3-yearly thereafter. We evaluated the VJRC patient response rate, acceptability, and outcome. Patient satisfaction was measured in a subgroup of patients using a satisfaction survey. VJRC costs were calculated compared to face-to-face follow-up.ResultsThe VJRC had a 92.05% overall response rate. Only 7.22% required further in-person appointments with only 3% being reviewed by an orthopedic consultant. VJRC resulted in an estimated saving of £42,644 per year at our institution. The patients’ satisfaction survey showed that 89.29% of the patients were either satisfied or very satisfied with VJRC follow-up.ConclusionVJRC follow-up for hip and knee arthroplasty patients is an effective alternative to in-person clinic assessment which is accepted by patients, has high patient satisfaction, and can reduce the cost to both health services and patients.     

运动学对线应用于全膝关节置换术的研究进展

全膝关节置换术是目前治疗终末期膝关节骨性关节炎最有效的方法之一，全膝关节置换术后膝关节功能、术后膝关节疼痛与术后下肢力线有着密切的关系。目前膝关节置换术下肢对线方式主要采用机械力学对线方法，该方法可以改善膝关节功能，但是有部分患者也会产生术后膝关节的疼痛、活动受限等并发症，导致术后患者满意度较差。近些年越来越多的研究开始关注运动力学对线技术并应用于临床。运动学对线技术旨在重建患者的解剖结构，将膝关节假体运动轴与膝关节生理性运动轴保持一致，减少膝关节周围软组织和韧带的松解，实现膝关节生理性运动。该文就运动力学对线方法在全膝关节置换术中的应用进展作一综述。     

The Outcome of Cemented Acetabular Components in Total Hip Arthroplasty for Osteoarthritis Defines a Proficiency Threshold: Results of 22,956 Cases From the Australian Orthopaedic Association National Joint Replacement Registry

BackgroundThe declining popularity of cemented acetabular components is incongruous, given the published results of prostheses implanted using contemporary techniques. The outcome of arthroplasty has previously been demonstrated to correlate with surgeon experience and volume of practice. We aim to explore if surgeon volume alters outcomes of cemented acetabular components based on survivorship data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR).MethodsAn observational study was undertaken using a cohort of 22,956 patients with a primary diagnosis of osteoarthritis in the period 2003-2016 in whom cemented acetabular components were implanted. The cohort was stratified by age (greater than or less than 65 years) and annualized surgical volume of ≤10, >10-≤25, and >25 cases.ResultsStratified by age and volume, there was a protective benefit against revision conveyed at volume thresholds of 10 cases per annum and 25 cases per annum for patients ≥65 years of age and <65 years of age, respectively.ConclusionCemented total hip arthroplasty has excellent survivorship out to 15 years based on AOANJRR data. This survivorship is further improved if surgeons perform a higher volume of cases, with >25 cases conferring the greatest benefit. The AOANJRR data set is used to define best practice; surgeons who choose to utilize cemented acetabular fixation should be encouraged to perform this technique in adequate volumes to minimize revision risk and ensure the preservation of this important surgical skill set.     

Surgical Helmets Used During Total Joint Arthroplasty Harbor Common Pathogens: A Cautionary Note

BackgroundThe use of personal-protection surgical helmet/hood systems is now a part of the standard surgical attire during arthroplasty in North America. There are no protocols for the disinfection of these helmets.MethodsThis is a prospective, single-center, observational study. Helmets worn by 44 members of the surgical team and foreheads of 44 corresponding surgical personnel were swabbed at three distinct time points. In addition, 16 helmets were treated with hypochlorite spray to determine if pathogens could be eliminated. Swabs obtained were processed for culture and next-generation sequencing (NGS).ResultsOf the 132 helmet samples, 97 (73%) yielded bacteria on culture and 94 (71%) had evidence of bacterial–deoxyribonucleic acid (DNA) on NGS. Of the swabs sent for bacterial identification at the three time points, at least one from each helmet was positive for a pathogen(s). Of the 132 forehead samples, 124 (93%) yielded bacteria on culture and 103 (78%) had evidence of bacterial-DNA on NGS. The most commonly identified organism from helmets was Cutibacterium acnes (86/132) on NGS and Staphylococcus epidermidis (47/132) on culture. The most commonly identified organism from the foreheads of surgical personnel was Cutibacterium acnes (100/132) on NGS and Staphylococcus epidermidis (70/132) on culture. Sanitization of helmets was totally effective; no swabs taken the following morning for culture and NGS identified any bacteria.ConclusionThis study demonstrates that surgical helmets worn during orthopedic procedures are contaminated with common pathogens that can potentially cause surgical site infections. The findings of this study should at the minimum compel us to develop protocols for the disinfection of these helmets.     

Migration and Inducible Displacement of the Bicruciate-Stabilized Total Knee Arthroplasty: A Randomized Controlled Trial of Gap Balancing and Measured Resection Techniques

BackgroundThe goal of this study is to investigate the migration and inducible displacement of a bicruciate-stabilized (BCS) total knee arthroplasty implanted using gap balancing (GB) or measured resection (MR) surgical techniques. We hypothesized equal migration and displacement between the techniques.MethodsThe study is a single-blinded, prospective, randomized controlled trial, with allocation of 71 patients to either GB or MR groups. Fifteen patients were withdrawn, resulting in 31 patients in the GB group and 25 in the MR group. Patients received the JOURNEY II? BCS implant. Migration and inducible displacement were evaluated using radiostereometric analysis and patient examinations were performed at a 2-week baseline, and at 6 weeks, 3 months, 6 months, 1 year, and 2 years postoperation.ResultsNo differences (P > .05) existed between GB and MR groups for any measurement of tibial or femoral migration. Both groups had tibial migrations below 0.5 mm from baseline to 6 months, and below 0.2 mm from both 6 months to 1 year and 1-2 years postoperation. No differences (P > .05) were found between GB and MR groups for inducible displacement.ConclusionNo differences were found in implant migration or inducible displacement between GB and MR groups. The BCS implant can be expected to have migration risks on par with industry standards and both surgical techniques are safe and effective options for implantation of this implant design.     

The Fate and Relevance of the Patella in Two-Stage Revision Total Knee Arthroplasty for Periprosthetic Joint Infection

BackgroundIt remains unclear whether reimplantation of a patellar component during a two-stage revision for periprosthetic total knee arthroplasty infection (PJI) affects patient reported outcome measures (PROMs) or implant survivorship. The purpose of this study was to evaluate whether patellar resurfacing during reimplantation confers a functional benefit or increases implant survivorship after two-stage treatment for PJI.MethodsTwo-stage revisions for knee PJI performed by three surgeons at a single tertiary care center were reviewed retrospectively. All original patellar components and cement were removed during resection and the patella was resurfaced whenever feasible during reimplantation. PROMs, implant survivorship, and radiographic measurements (patellar tilt and displacement) were compared between knees reimplanted with a patellar component versus those without a patellar component.ResultsA total of 103 patients met the inclusion criteria. Forty-three patients (41.7%) underwent reimplantation with, and 60 patients (58.3%) without a patellar component. At a mean follow-up of 33.5 months, there were no significant differences in patient demographics or PROMs between groups (P ≥ .156). No significant differences were found in the estimated Kaplan-Meier all-cause, aseptic, or septic survivorship between groups (P ≥ .342) at a maximum of 75 months follow-up. There was no significant difference in the change (pre-resection to post-reimplant) of patellar tilt (P = .504) or displacement (P = .097) between the groups.ConclusionPatellar resurfacing during knee reimplantation does not appear to meaningfully impact postoperative PROMs or survivorship. Given the risk of potential extensor mechanism complications with patellar resurfacing, surgeons may choose to leave the patella without an implant during total knee reimplantation and expect similar clinical outcomes.Level of EvidenceLevel III.