Evaluating the accuracy of resection planes in mandibular surgery using a preoperative,intraoperative, and postoperative approach

In mandibular surgery, three-dimensionally printed patient-specific cutting guides are used to translate the preoperative virtually planned resection planes to the operating room. This study was performed to determine whether cutting guides are positioned according to the virtual plan and to compare the intraoperative position of the cutting guide with the resection performed. Nine patients were included. The exact positions of the resection planes were planned virtually and a patient-specific cutting guide was designed and printed. After surgical placement of the cutting guide, intraoperative cone beam computed tomography (CBCT) was performed. Postoperative CT was used to obtain the final resection planes. Distances and yaw and pitch angles between the preoperative, intraoperative, and postoperative resection planes were calculated. Cutting guides were positioned on the mandible with millimetre accuracy. Anterior osteotomies were performed more accurately than posterior osteotomies (intraoperatively positioned and final resection planes differed by 1.2 ± 1.0 mm, 4.9 ± 6.6°, and 1.8 ± 1.5°, respectively, and by 2.2 ± 0.9 mm, 9.3 ± 9°, and 8.3 ± 6.5° respectively). Differences between intraoperatively planned and final resection planes imply a directional freedom of the saw through the saw slots. Since cutting guides are positioned with millimetre accuracy compared to the virtual plan, the design of the saw slots in the cutting guides needs improvement to allow more accurate resections.     

Accuracy of midface advancement using patient-specific surgical guides and pre-bent plates versus conventional interocclusal wafers and conventional plate fixation in quadrangular Le Forte II osteotomy. A randomised controlled trial

The aim of this study was to assess the accuracy of quadrangular Le Fort II osteotomy and midface advancement utilising digitally fabricated surgical guides with pre-bent plates compared with conventional interocclusal wafers. Twenty patients with midface deficiency were allocated randomly to two groups: patient-specific surgical guides and pre-bent titanium miniplates were utilised in the study group, while conventional interocclusal wafers with intraoperatively adapted titanium miniplates were utilised in the control group. The accuracy of virtual planning was assessed in both groups using computed tomography (CT). Both groups showed accurate transfer of the plan, but the computer-guided group showed significantly greater accuracy and a shorter surgical time than the conventional group. The use of patient-specific surgical guides and pre-bent plates represents a promising computer-guided approach especially for inexperienced surgeons. Nevertheless, a major limitation is increased overall cost compared with the conventional approach.     

Do patient-specific cutting guides and plates improve the accuracy of maxillary repositioning in hemifacial microsomia?

The aim of this retrospective study was to use computer-aided design and manufacturing (CAD/CAM) patient-specific plates and cutting guides for the waferless positioning and fixation of the maxilla after bimaxillary osteotomies in cases of hemifacial microsomia with condylar dysplasia or absence of the temporomandibular joint (TMJ), and to compare the results with the CAD/CAM fabricated surgical wafer by 3-dimensional analysis. Eighteen patients were selected from the hospital database, preoperative surgical planning and simulation were done on 3-dimensional computed tomographic models for all patients, and they were divided into Group I – in which CAD/CAM patient-specific cutting guides and plates were used; and Group II – in which CAD/CAM fabricated surgical wafers were used. Finally, the outcome was evaluated by comparing planned with postoperative outcomes. The largest discrepancies of the Le Fort I segment were 0.50 (0.18) mm in the anteroposterior direction and 0.82 (0.60)° in the yaw orientation with Group I. The largest discrepancies of the Le Fort I segment were 1.32 (1.40) mm in superioinferior direction and 8.48 (7.73)° in the yaw orientation with Group II. The CAD/CAM patient-specific cutting guides and plates proved to be reliable and have great value in improving the accuracy in repositioning the Le Fort I segment and in the efficacy of orthognathic treatment of hemifacial microsomia with condylar dysplasia or no TMJ. The CAD/CAM patient-specific cutting guides and plates are therefore a useful alternative to the wafer technique.     

Accuracy of position of cutting and drilling guide for sagittal split guided surgery: a proof of concept study

The benefits of three-dimensional planning and guided surgery have been realised over the last few years in maxillofacial surgery. Reproducing the exact positioning of the cutting and drilling guides on the flat mandibular angles defined by the engineer is a challenge for the surgeon and for the reliability of guided bilateral sagittal split osteotomy. Reference screws positioned on the skeleton before the acquisition of medical computed tomographic data can provide a fixed landmark that can be used during surgery and by the engineer during the design phase. The objective of this proof of concept in vitro study is to calculate the accuracy obtained for guides positioned by inserting a reference screw. The precision obtained for 30 guides following the insertion of 30 reference screws on 15 mandibular models was analysed. The models were scanned using an optical scanner and compared to CAD-CAM projects. The mean (SD) absolute position (in)-inaccuracy is 0.1616 (0.1141) mm for the entire guide surface and 0.13143 (0.0835) mm for the rim surface. The results indicate that the use of reference screws is efficient, and so they can be used to position guides accurately during guided bilateral sagittal split osteotomy.     

Use of a titanium cutting guide to assist with raising and inset of a DCIA free flap

Reconstructing maxillary defects can be challenging. In particular, Class 3 and 4 defects require careful planning.³ Bone for reconstruction must be placed in the correct three dimensional (3D) position in order to achieve a good cosmetic and functional result. Correct size and positioning of the harvested bone also enables placement of dental implants and allows rehabilitation.     

Current Data Do Not Support Routine Use of Patient-Specific Instrumentation in Total Knee Arthroplasty

The purpose of this systematic review and meta-analysis is to compare patient-specific instrumentation (PSI) versus standard instrumentation for total knee arthroplasty (TKA) with regard to coronal and sagittal alignment, operative time, intraoperative blood loss, and cost. A systematic query in search of relevant studies was performed, and the data published in these studies were extracted and aggregated. In regard to coronal alignment, PSI demonstrated improved accuracy in femorotibial angle (FTA) (P = 0.0003), while standard instrumentation demonstrated improved accuracy in hip-knee-ankle angle (HKA) (P = 0.02). Importantly, there were no differences between treatment groups in the percentages of FTA or HKA outliers (>3 degrees from target alignment) (P = 0.7). Sagittal alignment, operative time, intraoperative blood loss, and cost were also similar between groups (P > 0.1 for all comparisons).     

Improved Radiographic Outcomes With Patient-Specific Total Knee Arthroplasty

Patient-specific guides can improve limb alignment and implant positioning in total knee arthroplasty, although not all studies have supported this benefit. We compared the radiographs of 100 consecutively-performed patient-specific total knees to a similar group that was implanted with conventional instruments instead. The patient-specific group showed more accurate reproduction of the theoretically ideal mechanical axis, with fewer outliers, but implant positioning was comparable between groups. Our odds ratio comparison showed that the patient-specific group was 1.8 times more likely to be within the desired + 3° from the neutral mechanical axis when compared to the standard control group. Our data suggest that reliable reproduction of the limb mechanical axis may accrue from patient-specific guides in total knee arthroplasty when compared to standard, intramedullary instrumentation.     

数字化种植导板的临床应用研究进展

随着现代口腔种植修复技术的发展,数字化种植导板能很好地控制种植体植入的角度、方向及深度,具有缩短手术时间、降低手术风险、可实现不翻瓣种植等优势,已被更多地应用于临床,同时仍存在制作过程复杂、成本较高、地域条件的差异、精确度欠佳等问题.本文对数字化种植导板制作、分类、精确性等方面进行综述,为口腔种植医生应用数字化口腔种植技术提供参考.