直丝弓矫治器和Begg矫治器治疗安氏Ⅱ类1分类错[牙合]畸形疗效比较

目的:对比不同矫治器对错[牙合]畸形患者面高度及前后牙咬合关系的影响。方法:选取于笔者医院接受矫治的83例错[牙合]畸形患者,根据患者矫治器类型分为直丝弓组和Begg组,分别为42例和41例。比较并分析两组患者治疗前后牙咬合关系、硬组织、磨牙及面高度的变化情况。结果:矫治后,两组患者OJ-PPV、OB-PP、LMA-MPV、LMA-MPV均降低,Begg矫治组OJ-PPV水平显著高于直丝弓矫治组,OB-PP、LMA-MPV、LMA-MPV水平显著低于直丝弓矫治组,差异均具有统计学意义(P<0.05);两组患者LAFH、LAFH/TAFH、PFH/TAFH水平均升高,其中Begg矫治组患者LAFH水平显著低于直丝弓矫治组,差异均具有统计学意义(P<0.05);两组患者LMA-MP、LMC-MP水平均升高,差异具有统计学意义(P<0.05);矫治前后,两组患者SNA、SNA、ANB水平均无统计学差异(P>0.05)。结论:两种矫治器对错[牙合]畸形患者硬组织变化均无明显影响,其中Begg矫治对患者前后牙咬合关系改善作用更强,直丝弓对患者面高度的改善能力更强。     

Effect of contralateral cane use on hip moment impulse in the frontal plane during the stance phase

BackgroundRecent reports have shown that the daily cumulative moment in the frontal plane (i.e., product of hip moment impulse in the frontal plane during the stance phase and mean steps per day) is a risk factor for hip osteoarthritis. This study aimed to clarify the effect of contralateral cane use on hip moment impulse in the frontal plane of the stance limb.MethodsThis study included 15 healthy subjects who walked under four experimental conditions: (1) without a cane and (2–4) contralateral cane use with 10%, 15%, and 20% body weight support (BWS), respectively. To maintain the same walking speed in all conditions, the cadence was set to 80 steps/min, and the step length was fixed. The hip moment impulses in the frontal plane (i.e., area under the hip ab-adduction moment waveform) and peak hip adduction moments in all conditions were calculated.ResultsContralateral cane use significantly decreased the hip moment impulse in the frontal plane and peak hip adduction moment compared to non-cane use. Moreover, the hip moment impulse in the frontal plane and peak hip adduction moment decreased significantly with increased cane BWS. There were no significant differences in walking speed, cadence, and step length between the four conditions.ConclusionContralateral cane use decreases the hip moment impulse in the frontal plane and peak hip adduction moment in the stance limb. These findings may help clarify how to delay the progression of hip osteoarthritis.     

Bloqueio do plano do eretor da espinha com técnica de múltiplos cateteres para esofagectomia aberta: relato de caso

Background and objective

Erector spinae plane block is a valid technique to provide simultaneously analgesia for combined thoracic and abdominal surgery.

胸廓矢状面倾斜度的测定及其对放疗的意义

目的了解人体前胸矢状面倾斜度的大小及对放疗剂量分布的影响。方法选择126例患者行胸部CT扫描并予正中矢状面重建。分别测定上中下胸廓层面前后体表中线至脊髓距离及各层上下间距,计算出前胸倾斜度。查TMR表得出中平面深度及脊髓深度处上中胸及中下胸层面剂量误差。结果前野各层面至脊髓距离变化较大,后野变化较小。人体前胸倾斜度范围为25~56°。上中胸段组的上下缘剂量误差较大,躯体中平面平均相差8%,脊髓17%。中下胸段组剂量误差较小,躯体中平面4%,脊髓7%。误差随倾斜角度增加而增加。根据倾斜度得出合适的楔形板修正角度大约为10~35°。结论人体前胸矢状面存在自然倾斜度,这种倾斜影响前野剂量分布,应予以个体化修正。建议根据角度的大小选择合适的头足向楔形板优化。     

平面导板在深覆(牙合)矫治中的临床应用研究

目的：探讨平面导板矫治重度深覆[牙合]患者的作用机制及临床作用要点。方法：对18名生长发育期的重度深覆[牙合]患者,用平面导板来打开咬合,并对咬合打开前后的硬软组织变化进行分析。结果：①上下后牙及牙槽高度均增加,下后牙及牙槽高度的增加值大于上后牙及牙槽高度的增加值,而对前牙及牙槽高度的影响无统计学差异;②上下颌骨在水平方向上无改变,但下颌平面角与下面高/全面高治疗后较治疗前增大,后面高/前面高治疗后较治疗前减小;③覆[牙合]减小,Spee氏曲线得到整平;④松弛的下唇肌肉得到紧张,从而改善了侧貌外形。结论：平面导板使覆[牙合]减小主要是后牙及后牙齿槽突高度增加的结果,对生长发育期的低角重度深覆[牙合]患者治疗效果较好。     

叩齿紧咬运动中松动牙动态力变化特点的研究

目的:研究紧咬、叩齿运动中松动牙牙合力的动态变化特征。方法:选择19例单侧下颌第一磨牙松动的患者,用PVDF动态牙合力仪测量健侧和患侧下颌第一磨牙节律性叩齿和紧咬运动中牙合力动态变化曲线,分析最大牙合力峰值和到达峰值的时间,对两侧的测量结果进行分析。结果:叩齿运动中健侧下颌第一磨牙牙合力峰值平均为25kg,到达峰值的时间为108ms;患侧的分别为21kg和126ms;紧咬运动中健侧下颌第一磨牙牙合力峰值平均为27kg,到达峰值的时间为768ms;患侧的分别为23kg和1023ms;经配对t检验,健侧与患侧的峰值及到达峰值的时间差异均有显著性。结论:牙齿松动导致咀嚼功能降低,牙合力值和牙合力上升的速度均降低。     

Social and psychological factors associated with adolescents'' self-acceptance of occlusal condition

Studies using plaster models of teeth and photographs simulating the full range of occlusal conditions have found high agreement between measures of adolescent social acceptability of these conditions and perceived need for orthodontic treatment. This study examined the association between adolescents' acceptability of their own occlusal condition, severity of malocclusion, and likelihood of undergoing orthodontic treatment. The factors predicting the acceptability of occlusal condition of 13-yr-olds, as assessed by the SASOC scale, were measurements of acceptability of general physical appearance, and the severity of occlusal condition. Variability in SASOC scores appeared to be independent of gender, socioeconomic status, and ethnicity. Gender, and severity of occlusal condition were important differences between subjects who had received, planned, or were undergoing orthodontic treatment, and those who had not. Neither SASOC scores nor perceived need for treatment accounted for a significant proportion of the variance between these groups. Although adolescents seeking orthodontic treatment had a greater severity of malocclusion than those not, little difference was observed between these groups in acceptance of occlusal condition.     

Crowns cemented on crown preparations lacking geometric resistance form. Part II: effect of cement.

PURPOSE: This study evaluated the effect of different cements on resistance to dislodgment of crowns cemented on preparations lacking geometric resistance form. MATERIALS AND METHODS: A preparation that offered no geometric resistance form, with 20 degrees total occlusal convergence (TOC), 0.9 mm wide shoulder finish line, and a 2.5 mm axial wall height was created on an ivorine tooth using a milling machine. Ten metal test specimen die replicas and 10 standardized metal crowns with recipient sites for the application of external forces through a universal testing machine were fabricated. The crowns were cemented on the dies under 5 and 10 kg external loads, the marginal openings measured, loaded to dislodgment, and cleaned of cement. The process was repeated using zinc oxide and eugenol (ZOE), zinc phosphate (ZPh), resin modified glass ionomer (RMGI), and composite resin (CR) cements. RESULTS: Marginal openings under 5 kg cementation loads were 74.63 (+/-15.04) for ZOE, 75.98 (+/-18.20) microm for ZPh, 98.58 (+/-22.62) microm for RMGI, and 105.82 (+/-20.07) microm for CR cements respectively; under 10 kg cementation loads they were 57.62 (+/-15.86) microm, 59.55 (+/-15.41) microm, 95.00 (+/-19.52) microm, 101.30 (+/-12.52) microm respectively. Oblique dislodgment forces, measured with a Universal testing machine, were 40.18 (+/- 6.76) N for ZOE, 215.65 (+/-45.79) N for ZPh, 165.43 (+/-19.53) N for RMGI, and 181.54 (+/-30.75) N for CR respectively when crowns were cemented under 5 kg loads. The corresponding values for 10 kg loads were 38.62 (+/-4.19), 274.86 (+/-54.22), 139.70 (+/-21.71), and 160.40 (+/-21.21) respectively. Only zinc phosphate cement produced statistically enhanced resistance when crowns were cemented under 10 kg force (p value = 0.035). CONCLUSIONS: Under the conditions of the present study only crowns cemented with zinc phosphate displayed increased resistance to dislodgment on preparations lacking resistance form.