Effectiveness,Patient Satisfaction,and Cost Reduction of Virtual Joint Replacement Clinic Follow-Up of Hip and Knee Arthroplasty

BackgroundTotal hip and knee arthroplasties are increasingly performed operations, and routine follow-up places huge demands on orthopedic services. This study investigates the effectiveness, patients’ satisfaction, and cost reduction of Virtual Joint Replacement Clinic (VJRC) follow-up of total hip arthroplasty and total knee arthroplasty patients in a university hospital. VJRC is especially valuable when in-person appointments are not advised or feasible such as during the COVID-19 pandemic.MethodsA total of 1749 patients who were invited for VJRC follow-up for knee or hip arthroplasty from January 2017 to December 2018 were included in this retrospective study. Patients were referred to VJRC after their 6-week postoperative review. Routine VJRC postoperative review was undertaken at 1 and 7 years and then 3-yearly thereafter. We evaluated the VJRC patient response rate, acceptability, and outcome. Patient satisfaction was measured in a subgroup of patients using a satisfaction survey. VJRC costs were calculated compared to face-to-face follow-up.ResultsThe VJRC had a 92.05% overall response rate. Only 7.22% required further in-person appointments with only 3% being reviewed by an orthopedic consultant. VJRC resulted in an estimated saving of £42,644 per year at our institution. The patients’ satisfaction survey showed that 89.29% of the patients were either satisfied or very satisfied with VJRC follow-up.ConclusionVJRC follow-up for hip and knee arthroplasty patients is an effective alternative to in-person clinic assessment which is accepted by patients, has high patient satisfaction, and can reduce the cost to both health services and patients.     

Hip Displacement in Cerebral Palsy: The Role of Surveillance

IntroductionHip displacement is common in cerebral palsy (CP) and is related to the severity of neurological and functional impairment. It is a silent, but progressive disease, and can result in significant morbidity and decreased quality of life, if left untreated. The pathophysiology of hip displacement in CP is a combination of hip flexor-adductor muscle spasticity, abductor muscle weakness, and delayed weight-bearing, resulting in proximal femoral deformities and progressive acetabular dysplasia. Due to a lack of symptoms in the early stages of hip displacement, the diagnosis is easily missed. Awareness of this condition and regular surveillance by clinical examination and serial radiographs of the hips are the key to early diagnosis and treatment.Hip surveillance programmesSeveral population-based studies from around the world have demonstrated that universal hip surveillance in children with CP allows early detection of hip displacement and appropriate early intervention, with a resultant decrease in painful dislocations. Global hip surveillance models are based upon the patients’ age, functional level determined by the Gross Motor Function Classification system (GMFCS), gait classification, standardized clinical exam, and radiographic indices such as the migration percentage (MP), as critical indicators of progressive hip displacement.ConclusionDespite 25 years of evidence showing the efficacy of established hip surveillance programmes, there is poor awareness among healthcare professionals in India about the importance of regular hip surveillance in children with CP. There is a need for professional organizations to develop evidence-based guidelines for hip surveillance which are relevant to the Indian context.     

Prospective characterization of incident hepatic steatosis in pediatric and adolescent patients after total pancreatectomy with islet autotransplantation

BackgroundHepatic steatosis has been described as a common finding in adults following total pancreatectomy with islet autotransplantation (TPIAT) but it is unknown if this occurs in children and adolescents.ObjectivesTo define the frequency of post-TPIAT hepatic steatosis in a sample of children and adolescents and to identify clinical predictors of incident steatosis post-TPIAT.MethodsIn this prospective study, consecutive participants at least 1-month post-TPIAT underwent a liver MRI with proton density fat fraction (PDFF) and blood draw at our pediatric academic medical center between April 2021 and January 2022. Comparison clinical pre-TPIAT liver MRI or ultrasound and insulin use and graft function data were extracted from the medical record. T-tests were used for the comparison of means across continuous variables between participants with and without post-TPIAT steatosis.ResultsA total of 20 participants (mean: 13 ± 4 years; 12 female) were evaluated. Mean liver PDFF at research MRI was 7.4 ± 6.2% (range: 2–25%). Seven participants (35%) had categorical hepatic steatosis (PDFF>5%) post-TPIAT, five of whom had pre-TPIAT steatosis, reflecting a 13% (2/15; 95% CI: 2–40%) incidence of post-TPIAT steatosis. Participant characteristics were not significantly different between subgroups with and without post-TPIAT steatosis. Mean PDFF at research MRI was not different between graft function subgroups (7.5% optimal/good vs. 7.3% marginal/failure; p = .96).ConclusionOur study shows a moderate prevalence but low incidence of hepatic steatosis in a small sample of children and adolescents post-TPIAT. This study raises questions about a causal relationship between TPIAT and hepatic steatosis.     

DHS和PFNA固定治疗老年股骨粗隆间骨折的疗效

目的对比动力髋螺钉(dynamic hip screw,DHS)治疗和股骨近端抗旋髓内钉(proximal femoral nail anti-rotation,PFNA)固定治疗老年股骨粗隆间骨折疗效。方法纳入本院收治的45例采用PFNA固定治疗的老年股骨粗隆间骨折患者作为研究组,研究时间为2017年11月-2018年11月;回顾性分析2016年11月-2017年11月在我院采用DHS治疗的45例老年股骨粗隆间骨折患者的临床资料,作为对照组。记录两组的相关手术指标,观察手术并发症情况。结果研究组的手术时间和骨折愈合时间均短于对照组,术中出血量明显少于对照组,术后疼痛VAS评分均明显低于对照组(P<0.05)。对照组的并发症发生率高于研究组(P<0.05)。结论PFNA固定治疗比DHS治疗老年股骨粗隆间骨折更加安全有效,值得临床借鉴和应用。     

The Outcome of Cemented Acetabular Components in Total Hip Arthroplasty for Osteoarthritis Defines a Proficiency Threshold: Results of 22,956 Cases From the Australian Orthopaedic Association National Joint Replacement Registry

BackgroundThe declining popularity of cemented acetabular components is incongruous, given the published results of prostheses implanted using contemporary techniques. The outcome of arthroplasty has previously been demonstrated to correlate with surgeon experience and volume of practice. We aim to explore if surgeon volume alters outcomes of cemented acetabular components based on survivorship data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR).MethodsAn observational study was undertaken using a cohort of 22,956 patients with a primary diagnosis of osteoarthritis in the period 2003-2016 in whom cemented acetabular components were implanted. The cohort was stratified by age (greater than or less than 65 years) and annualized surgical volume of ≤10, >10-≤25, and >25 cases.ResultsStratified by age and volume, there was a protective benefit against revision conveyed at volume thresholds of 10 cases per annum and 25 cases per annum for patients ≥65 years of age and <65 years of age, respectively.ConclusionCemented total hip arthroplasty has excellent survivorship out to 15 years based on AOANJRR data. This survivorship is further improved if surgeons perform a higher volume of cases, with >25 cases conferring the greatest benefit. The AOANJRR data set is used to define best practice; surgeons who choose to utilize cemented acetabular fixation should be encouraged to perform this technique in adequate volumes to minimize revision risk and ensure the preservation of this important surgical skill set.     

Cementless Total Hip Arthroplasty for Adult Patients With Sequelae From Childhood Hip Infection: A Medium-Term Follow-Up Study

BackgroundThe aim of this study is to evaluate midterm clinical and radiographic results of total hip arthroplasties (THAs) with cementless implants for adult patients with sequelae from childhood hip infection.MethodsBetween 2002 and 2016, 165 patients (165 hips) who had a hip infection during childhood were treated with THAs with cementless implants. The average duration of follow-up was 93.5 months (range 26-206). Clinical results were evaluated via the Harris Hip Score and radiographic results were analyzed with postoperative serial X-rays.ResultsThe average Harris Hip Score increased from 27 (range 8-53) before surgery to 91 (range 45-100) at the latest follow-up examination (P < .001). At the latest follow-up evaluation, 9 cementless acetabular components demonstrated partial, nonprogressive radiolucencies. No subsidence of more than 2 mm or evidence of a radiolucent line was observed around the femoral components. Intraoperative periprosthetic fractures occurred in 11 hips, including 3 acetabular fractures, 2 fractures of greater trochanter, 1 femoral shaft fracture, and 5 fractures of femoral calcar. Postoperative complications included 3 cases of periprosthetic infection, 1 episode of dislocation, 1 case of a femoral periprosthetic fracture, 5 cases of sciatic nerve injury, 1 case of femoral nerve injury, and 1 case of squeaking from a ceramic bearing surface.ConclusionCementless THA for adult patients with sequelae from childhood hip infection presents significant technical challenges and a relatively high complication rate. With meticulous surgical planning and anticipation for the key technical challenges frequently encountered, the medium-term clinical and radiographic results of THA in this setting were good with high implant survivorship and patient satisfaction.     

Precision and Accuracy of Measurements on CT Scout View

ObjectivesThe purposes of this study were to (1) investigate the limits of measurements on scout view in three computed tomography axes, x, y and z and (2) develop a model to provide better understanding of measurement accuracy.MethodsFor the first objective, anteroposterior and lateral scout views of a Catphan phantom 200 mm in diameter and length were acquired with a GE scanner at 21 different table heights. Phantom measurements on scout view were performed by two experienced readers. The comparison of their measures provided estimation of precision. The accuracy was assessed by determining the bias, calculated as the difference between the values measured on scout view and the real phantom size. Second, a model was developed investigating the relationship between the dimensions of the object, its image, and the table height. This relationship was tested on our data.ResultsScout view measurements were precise, with less than 0.53% difference between readers. In addition, small biases of about 1 mm were detected in the z-axis, whatever the table height. In the other axes, serious biases from −13 to +73 mm were measured. Furthermore, at isocentre, overestimations up to 7 mm were shown. The results also indicated that biases in scout view measurements are because of the geometrical projection related to the object-detector distance.ConclusionsMeasurements in the table movement axis are precise and accurate, conferring to scout views an added value for preoperative planning in orthopedic surgery.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

Patient Functional Status as an Indication for Primary Total Hip Arthroplasty: A Systematic Review and Meta-Analysis

BackgroundThe number of total hip arthroplasties performed per year is increasing for reasons not fully explained by a growing and aging population. The purpose of this study was to determine the role of patient functional status as an indication for surgery and determine if patients are undergoing surgery at a better functional status than in the past.MethodsA systematic review and meta-analysis of the MEDLINE, EMBASE, and Cochrane databases was performed in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Functional status was assessed using the 36-Item Short-Form Health Survey’s Physical Component Summary score. Only primary procedures were included; revisions were excluded. Articles were screened by 2 independent reviewers with conflicts resolved with a third reviewer. Meta-regression analysis was performed to determine the effect of time, patient age, and gender. Subgroup analysis was performed to compare geographic regions.ResultsA total of 1504 articles were identified. Data from 172 groups representing 18,644 patients recruited from 1990 to 2013 and identified from 107 articles were included. The mean preoperative Physical Component Summary score was 31.2 (95% confidence interval 30.5-31.9) with a 95% prediction interval of 22.6-39.8. The variance across studies was statistically significant (P = .000) with 97.25% true variance. Year of enrollment, age, and the percentage of females were not found to have any significant effect. There were no differences between countries.ConclusionPatients are undergoing total hip arthroplasty at a similar preoperative physical functional status as in the past. Patient age, gender, and location do not influence the functional status at which patients are indicated for surgery.     

Polyethylene in knee arthroplasty: A review

Polyethylene (PE) has been used extensively in knee arthroplasty since the mid 20th century. Progress in material manufacturing and processing has led to newer polyethylenes over last few decades with different material properties. It has been established that PE wear in knee arthroplasty causes particle induced osteolysis which is the main reason for late failure and requires revision surgery. Although there are various causes of wear, the properties of PE have long been a matter of investigation as a contributory factor. The advent of newer highly cross linked PE has been shown to improve wear rates in hip arthroplasty but the benefits have not been shown to be of the same degree in knee arthroplasty. The laboratory and clinical studies so far are limited and slightly conflicting in their conclusions. The risks of using highly cross linked PE in knee arthroplasty include tibial post fracture, disruption of locking mechanism, liner fracture which can lead to increased wear and osteolysis. The current evidence suggests that highly cross linked polyethylenes should be used with caution and only considered in younger active patients. The results of a recently completed randomized trial to compare the conventional with high molecular weight PE in knee arthroplasty are awaited.