Atrial fibrillation after cardiac surgery: A systematic review and meta-analysis

ObjectiveNew-onset postoperative atrial fibrillation (POAF) after cardiac surgery is common, with rates up to 60%. POAF has been associated with early and late stroke, but its association with other cardiovascular outcomes is less known. The objective was to perform a meta-analysis of the studies reporting the association of POAF with perioperative and long-term outcomes in patients with cardiac surgery.MethodsWe performed a systematic review and a meta-analysis of studies that presented outcomes for cardiac surgery on the basis of the presence or absence of POAF. MEDLINE, EMBASE, and the Cochrane Library were assessed; 57 studies (246,340 patients) were selected. Perioperative mortality was the primary outcome. Inverse variance method and random model were performed. Leave-one-out analysis, subgroup analyses, and metaregression were conducted.ResultsPOAF was associated with perioperative mortality (odds ratio [OR], 1.92; 95% confidence interval [CI], 1.58-2.33), perioperative stroke (OR, 2.17; 95% CI, 1.90-2.49), perioperative myocardial infarction (OR, 1.28; 95% CI, 1.06-1.54), perioperative acute renal failure (OR, 2.74; 95% CI, 2.42-3.11), hospital (standardized mean difference, 0.80; 95% CI, 0.53-1.07) and intensive care unit stay (standardized mean difference, 0.55; 95% CI, 0.24-0.86), long-term mortality (incidence rate ratio [IRR], 1.54; 95% CI, 1.40-1.69), long-term stroke (IRR, 1.33; 95% CI, 1.21-1.46), and longstanding persistent atrial fibrillation (IRR, 4.73; 95% CI, 3.36-6.66).ConclusionsThe results suggest that POAF after cardiac surgery is associated with an increased occurrence of most short- and long-term cardiovascular adverse events. However, the causality of this association remains to be established.     

骨形态发生蛋白2及碱性成纤维生长因子2对大鼠骨髓间充质干细胞膜片增殖和成骨分化的影响

文题释义： 细胞膜片技术：是在体外接种培养高密度的细胞，使其相互融合生长至100%而形成的透明致密膜状物。该技术不需要胰酶消化即可收集细胞，因此保留了大量的胞外基质、细胞间连接以及细胞-基质连接等结构。目前细胞膜片技术已成为组织工程领域的研究热点，已被推广应用于牙周膜、角膜、心脏、软骨、食管等多种组织器官修复。 成骨细胞：主要由内外骨膜和间充质始祖细胞分化而来，在复杂的骨形成过程中发挥着主要的功能，承担着骨基质的合成、分泌和矿化。骨髓间充质干细胞具有多向分化潜能，能定向分化为成骨细胞，其成骨分化过程可受多种因素的影响，如细胞因子的调控、遗传因素和激素水平等。背景：现阶段骨形态发生蛋白2和碱性成纤维生长因子2对骨髓间充质干细胞膜片增殖、成骨分化的影响和作用机制还尚未可知，如何将生长因子与组织工程细胞膜片技术相整合，最终将其用于骨缺损修复具有重要意义。 目的：探讨单独及联合应用骨形态发生蛋白2和碱性成纤维生长因子2对骨髓间充质干细胞膜片增殖和成骨分化的影响。 方法：体外分离培养鉴定SD大鼠骨髓间充质干细胞并构建细胞膜片，选用不同质量浓度的骨形态发生蛋白2和碱性成纤维生长因子2单独及联合诱导骨髓间充质干细胞膜片，CCK-8法结合碱性磷酸酶活性检测确定2种因子促进膜片增殖和成骨分化的最佳有效质量浓度；然后对骨髓间充质干细胞膜片进行成骨诱导，通过大体及显微镜观察、Vonkossa染色、茜素红染色、RT-PCR检测相关成骨标志物来评估诱导效果。 结果与结论：单独应用骨形态发生蛋白2可增强骨髓间充质干细胞膜片的碱性磷酸酶活性，最佳质量浓度为100 μg/L(P < 0.001)，单独应用碱性成纤维生长因子2能加速骨髓间充质干细胞膜片的增殖，最佳质量浓度为20 μg/L(P < 0.001)，而联合应用既可以促进膜片增殖又能提高其碱性磷酸酶活性(P < 0.001)；经成骨诱导后，4组膜片在形态学上无明显差异，均能诱导骨髓间充质干细胞膜片的成骨分化，其中联合组钙结节最明显(P < 0.001)，可显著促进膜片晚期成骨分化并抑制其早期成骨分化，具有明显的协同促进作用(P < 0.001)。结果表明，骨形态发生蛋白2和碱性成纤维生长因子2联合应用时具有协同作用，既可以促进骨髓间充质干细胞膜片增殖，又能显著增强其成骨诱导能力。ORCID: 0000-0003-1918-579X(何惠宇) 中国组织工程研究杂志出版内容重点：干细胞；骨髓干细胞；造血干细胞；脂肪干细胞；肿瘤干细胞；胚胎干细胞；脐带脐血干细胞；干细胞诱导；干细胞分化；组织工程     

VAC结合游离植皮治疗儿童大面积皮肤缺损疗效观察及对患儿生活质量的影响

目的:探讨负压创面治疗技术(Vacuum assisted closure,VAC)结合游离植皮治疗儿童大面积皮肤缺损疗效及对患儿生活质量的影响。方法:选取2015年2月-2019年2月笔者医院收治的60例大面积皮肤缺损患儿作为研究对象,按照随机数表法分为干预组和对照组,每组30例。对照组采用游离植皮术治疗,干预组在对照组的基础上结合VAC治疗,以皮片成活时间、皮片成活率、换药次数及住院天数评估疗效,以长海痛尺分级法评估患儿疼痛等级,以抑郁自评量表(Self-rating depression scale,SDS)、焦虑自评量表(Self-rating anxiety scale,SAS)评估患儿心理状态,以术后不良反应发生率评估患儿预后情况,以自制生活质量表评估患儿生活质量水平。结果:干预组患儿皮片成活时间、换药次数与住院天数均小于对照组,差异有统计学意义(P<0.05)。干预组患儿皮片成活率为93.33%高于对照组的76.67%,差异有统计学意义(P<0.05)。干预组治疗后疼痛感、SDS与SAS评分低于治疗前,且低于对照组,差异有统计学意义(P<0.05)。干预组患儿术后不良反应发生率为6.67%显著低于对照组23.33%,差异有统计学意义(P<0.05)。两组治疗前活动能力、心理健康及社交能力均低于治疗后,干预组治疗后活动能力、心理健康及社交能力均高于对照组(P<0.05)。结论:VAC结合游离植皮治疗儿童大面积皮肤缺损疗效显著,能有效降低患儿生理疼痛与心理焦虑,减少伤口感染等不良反应的发生,提高患儿生活质量,具有推广价值。     

Contemporary bone loss options: Rebuild,reinforce, and augment

Bone loss is commonly encountered during revision total knee arthroplasty (TKA). Small defects can be adequately managed with cement filling (with or without screws), modular prosthetic augments, and morselized allograft. For larger defects, cancellous impaction grafting and structural allografts have traditionally been utilized. More recently, highly porous tantalum cones and titanium sleeves have been designed to achieve axial and rotational stability in the metaphysis and subsequent biologic fixation. Sleeves are linked to one type of prosthesis, whereas cones are unlinked and can be used with any implant design. Multiple studies have demonstrated excellent survivorship and radiographic osseointegration at mid-term follow-up. This article provides a review of contemporary methods of bone loss management with a focus on highly porous metals and an emphasis on the authors’ preferred method for managing the severe bone loss in revision TKA.     

Morphological imaging and CT histogram analysis to differentiate pancreatic neuroendocrine tumor grade 3 from neuroendocrine carcinoma

PurposeTo compare morphological imaging features and CT texture histogram parameters between grade 3 pancreatic neuroendocrine tumors (G3-NET) and neuroendocrine carcinomas (NEC).Materials and methodsPatients with pathologically proven G3-NET and NEC, according to the 2017 World Health Organization classification who had CT and MRI examinations between 2006-2017 were retrospectively included. CT and MRI examinations were reviewed by two radiologists in consensus and analyzed with respect to tumor size, enhancement patterns, hemorrhagic content, liver metastases and lymphadenopathies. Texture histogram analysis of tumors was performed on arterial and portal phase CT images. images. Morphological imaging features and CT texture histogram parameters of G3-NETs and NECs were compared.ResultsThirty-seven patients (21 men, 16 women; mean age, 56 ± 13 [SD] years [range: 28-82 years]) with 37 tumors (mean diameter, 60 ± 46 [SD] mm) were included (CT available for all, MRI for 16/37, 43%). Twenty-three patients (23/37; 62%) had NEC and 14 patients (14/37; 38%) had G3-NET. NECs were larger than G3-NETs (mean, 70 ± 51 [SD] mm [range: 18 - 196 mm] vs. 42 ± 24 [SD] mm [range: 8 - 94 mm], respectively; P = 0.039), with more tumor necrosis (75% vs. 33%, respectively; P = 0.030) and lower attenuation on precontrast (30 ± 4 [SD] HU [range: 25-39 HU] vs. 37 ± 6 [SD] [range: 25-45 HU], respectively; P = 0.002) and on portal venous phase CT images (75 ± 18 [SD] HU [range: 43 - 108 HU] vs. 92 ± 19 [SD] HU [range: 46 - 117 HU], respectively; P = 0.014). Hemorrhagic content on MRI was only observed in NEC (P = 0.007). The mean ADC value was lower in NEC ([1.1 ± 0.1 (SD)] × 10⁻³ mm²/s [range: (0.91 - 1.3) × 10⁻³ mm²/s] vs. [1.4 ± 0.2 (SD)] × 10⁻³ mm²/s [range: (1.1 - 1.6) × 10⁻³ mm²/s]; P = 0.005). CT histogram analysis showed that NEC were more heterogeneous on portal venous phase images (Entropy-0: 4.7 ± 0.2 [SD] [range: 4.2-5.1] vs. 4.5 ± 0.4 [SD] [range: 3.7-4.9]; P = 0.023).ConclusionPancreatic NECs are larger, more frequently hypoattenuating and more heterogeneous with hemorrhagic content than G3-NET on CT and MRI.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.