Plasma Concentrations of Mycophenolic Acid Acyl Glucuronide Are Not Associated with Diarrhea in Renal Transplant Recipients

The aim of this study was to determine whether plasma concentrations of the acyl (AcMPAG) and phenolic (MPAG) glucuronide metabolites of mycophenolic acid (MPA) were related to diarrhoea in renal transplant patients on mycophenolate mofetil (MMF) with cyclosporine (CsA) or tacrolimus (TCL). Blood samples (0, 30, 120 min) were taken at days 3, 10, week 4, months 3, 6 and 12 for determination of MPA, MPAG and AcMPAG. MPA-AUC was estimated using validated algorithms. Two hour AUCs were calculated for MPAG and AcMPAG. Immunosuppressive therapy consisted of CsA/MMF (n= 110) and of TCL/MMF (n= 180). In 70/290 (24%) patients 86 episodes of diarrhoea were recorded during 12 months. Significantly more patients on TCL (31.1%) suffered from diarrhea compared to CsA (12.7%). MMF dose, MPA-AUC and the 2 h AUCs of MPAG and AcMPAG did not differ between patients with and without diarrhoea. Plasma AcMPAG and MPAG concentrations were substantially higher in patients on CsA compared with TCL, while MPA-AUC was lower in the former group. These data support the concept that CsA inhibits the biliary excretion of MPAG and AcMPAG, thereby potentially reducing the risk of intestinal injury through enterohepatic recycling of MPA and its metabolites.     

A monoclonal antibody (RH1-38) which inhibits multiple systems of cell-mediated cytotoxicity--II. Evidence that the epitope recognized is involved in a late step in the cytolytic mechanism

A monoclonal antibody (RH1-38) which blocks multiple systems of cell-mediated cytotoxicity was functionally characterized. RH1-38 specifically blocks, in the absence of complement, natural killer (NK) activity (K562 targets) without any effect on NK-K562 conjugate formation. Kinetic studies suggested that the antibody blocks a step that occurs 30-120 min after effector populations are mixed with target cells. Single-cell cytotoxicity assays in agarose, combined with standard 51Cr release assays and Michaelis-Menten analysis revealed that RH1-38 markedly decreases Vmax and the number of active NK cells, again without any effect on the number of target-binding cells. The maximum recycling capacity was usually decreased, but in some experiments unchanged, in the presence of the monoclonal antibody. RH1-38 inhibited equally well whole peripheral blood mononuclear leukocytes (PBML), Percoll-fractionated lymphocytes enriched for NK activity, and interferon (IFN)-boosted NK activity. PBML exposed to RH1-38 and then washed mediated depressed NK activity which was partially reversed by subsequent treatment with IFN. These studies are most consistent with the hypothesis that RH1-38 inhibits a step late in the NK cytolytic mechanism rather than through an effect on conjugate formation. The primary effect is probably not on the IFN-generating or boosting mechanism, but a secondary effect on IFN-related mechanisms cannot be ruled out. Inhibition through an effect on a small lymphocyte modulator of NK activity is also unlikely but not rigorously excluded. Thus, RH1-38 appears to inhibit NK activity through a direct effect on NK effector cells, probably by interfering with a cell-surface molecule which is important in the expression of NK activity. The companion paper demonstrates that this monoclonal antibody immunoprecipitates a molecule which is very similar or identical to the LFA-1 antigen. Thus, RH1-38 recognizes either a novel epitope on the LFA-1 molecule or alternatively a distinct, functional killer cell surface molecule. The epitope appears to be involved in a late step in the cytolytic mechanism, possibly part of the effector cell lytic machinery.     

Design of Copolymer-Based Blend Compatibilizers for Mixed Plastic Recycling

Mixed plastic waste recycling represents a significant challenge as the phase separation of different components dictates downgraded performance. Polymer-based compatibilizers can offer a promising solution to address this issue, through effectively reducing surface tension and increasing interfacial strength between distinct components to result in improved mechanical and thermal properties of recycled products. This perspective provides an overview of the fundamental concepts for the rational design of copolymer blend compatibilizers and discusses their recent advances, including both preformed and in situ generated systems. Impacts of key material parameters of compatibilizers, such as chain topology, chemical composition, and block sequence on their performance of remediating mixed plastics are discussed. Additionally, reactive compatibilization strategies are also introduced, including in situ formation of polymers, installing functional groups on mixed plastics, and employing dual compatibilization strategies. Looking forward, there are many research and technology opportunities in this area, especially for enabling the use of blend compatibilizers to practically address mixed plastic wastes at scale. Specifically, future compatibilizer design and application should provide strong competitiveness in both cost and energy savings, and carbon emission reduction. Together, the development of blend compatibilizers is an important step in establishing plastic circular economy and creating a more sustainable future.     

Manganese exposure in foundry furnacemen and scrap recycling workers

Objectives: Cast iron products are alloyed with small quantities of manganese, and foundry furnacemen are potentially exposed to manganese during tapping and handling of smelts. Manganese is a neurotoxic substance that accumulates in the central nervous system, where it may cause a neurological disorder that bears many similarities to Parkinson's disease. The aim of the study was to investigate the sources and levels of manganese exposure in foundry furnacemen by a combined measuring of blood-manganese (B-Mn) and manganese in ambient air (air-Mn). Methods: During a period of 16 months, Air-Mn and B-Mn (denoted `exposure values') were measured involving 24 furnacemen employed in three small size foundries and 21 scrap recycling workers from one plant. In the study period, 18 furnacemen had B-Mn measured 3–4 weeks after decreasing or stopping exposure (denoted `post-exposure values'). The reference group for the B-Mn measurements consisted of 90 Danish male subjects. Results: Furnacemen who work in insufficiently ventilated smelting departments inhale, absorb, and retain significant amounts of manganese in their blood (approx. 2.5–5 μg/l above reference values) despite a generally low measured airborne level of manganese fumes (0.002–0.064 mg/m³). The `exposure values' compared with `post-exposure values' revealed a significant decrease in the B-Mn (on average 3.7 μg/l) level of the most exposed furnacemen. Two persons in our study were suspected of suffering clinically subacute manganese intoxication as both had B-Mn levels beyond the normal limit (25 and 29 μg/l, respectively). The potential problem disappeared completely after cessation of exposure, and the B-Mn levels decreased to 9.4 and 14.1 μg/l, respectively. Conclusions: Risk assessment based on combined measurements of B-Mn and air-Mn seems to be valid in the interpretation of workers' hazard. Our study indicates that B-Mn may be a valuable parameter for estimating recent exposure (within 1–2 weeks). However, more knowledge is needed about the B-Mn level and its relation to neurological symptoms. Received: 20 January 1999 / Accepted: 14 June 1999     

Biliary secretion of sulindac and metabolites in man

The biliary secretion of sulindac and metabolites after a single 400 mg oral dose of the drug was studied in 3 elective gallbladder surgical patients following placement of an occludable T-tube in the common bile duct. Bile and systemic plasma were sampled at frequent intervals for up to 36 h postdose. The apparent biliary clearance (V?_cl,bilc) of the prodrug sulindac is about 25 times greater than that of the pharmacologically active sulfide metabolite. The total biliary flux of drug in normal man with an uninterrupted enterohepatic cycle, calculated from V?_cl,bile and historic mean plasma drug AUC values, averages 144 and 12·2 per cent of the dose as sulindac and the sulfide metabolite, respectively. Thus, enterohepatic recycling of the drug in man is principally in the form of the prodrug which not only limits exposure of the intestine to the active moiety but also sustains systemic concentrations of active drug upon reabsorption of the prodrug.     

Receptor-recycling model of clearance and distribution of insulin in the perfused mouse liver

Summary After perfusion of mouse livers with A₁₄-¹²⁵I-insulin for designated intervals, an acid-wash technique was employed to separately measure the surface-bound (X_s) and intracellular (X_i) A₁₄-¹²⁵I-insulin, as well as intracellular degradation products (X_deg) of labelled insulin. From the perfusate concentrations (C_p) of A₁₄-¹²⁵I-insulin, the apparent intrinsic hepatic clearance of labelled insulin at a high dose (0.2 nmol/l) was shown to be 60% smaller than that at a low dose (0.018 nmol/l), indicating that the cellular uptake of insulin is remarkably nonlinear at the concentration range examined. From the time courses of C_p, X_s, X_i and X_deg, the hepatic insulin disposition was shown to be largely accounted for by the receptor-mediated endocytosis. The observed data at the low dose were analysed to estimate biochemical parameters, (i.e., total receptor number, endocytotic rate constant and intracellular degradation rate constant) according to receptor-recycling and non-receptor-recycling models, using a computer-aided optimization procedure. The receptor-recycling model could not only adequately explain the C_p, X_s, X_i and X_deg at the low dose, but also predict the C_p at the high dose. On the other hand, a non-receptor-recycling model, in which recycling of receptors was not assumed, could also explain the observed data at the low dose, but failed to predict the C_p at the high dose, indicating that the receptor recycling process is necessary to explain the hepatic insulin clearance at high insulin concentrations, at which hepatic insulin clearance should be limited by the rate of receptor recycling. However, the applicability of our model might be limited within the physiologic insulin concentrations, because of the negative co-operativity of insulin-receptor interaction and a high-capacity, non-degradative and more rapidly recycling pathway for receptors that may occur at high concentrations of insulin. In conclusion, we have developed a mathematical model of hepatic insulin clearance and distribution under physiological conditions, including receptor binding, receptor-mediated endocytosis and receptor recycling, which has been so far demonstrated using isolated hepatocytes.     

枣属药用植物资源产业化过程副产物及废弃物的资源价值发现与循环利用策略构建

我国枣属（Ziziphus）植物可供药用的主要有枣、酸枣和滇刺枣,均属药食同源品种,资源需求量大。但其在生产及深加工过程产生大量废弃物及副产物,因无有效利用途径而废弃,造成资源浪费与环境污染。结合课题组前期研究进展,对该类群药用植物资源产业化过程废弃物及副产物的产生及其潜在资源价值进行了分析,对其资源利用途径与系统利用策略进行了整理,以期为我国枣属药用植物资源产业链延伸提供支撑,为其资源价值提升提供借鉴。      

Functional Analysis of Dynamin Isoforms in Drosophila Melanogaster

Dynamin and dynamin-like proteins are required for endocytosis. synaptic vesicle recycling and membrane trafficking. From the shibire locus in Drosophila melanogaster, six different isoforms of dynamin are generated by alternative splicing. However, the roles of the individual isoforms in cellular processes are unknown. To investigate functional differences among the dynamin isoforms, transgenic lines were generated that individually expressed each of 3 different isoforms under UAS^GAL4 control. The expression of the isoforms was controlled by neural promoter (elav)-driven GAL4, or by a shibire-promoter driven GAL4 transgene. Reporter gene expression indicated that the shi promoter is active during embryogenesis, and in larvae, pupae, and adults in a pattern consistent with normal dynamin expression. To assay for the ability of dynamin isoforms to function in vivo, the isoforms expressed via these GAL4 drivers were tested for the ability to rescue shibire phenotypes. When expressed at very high levels all individual isoforms tested rescued the temperature-sensitive paralytic phenotype of shl^ls2 flies; however, this rescue was partial, suggesting that no single tested isoform is sufficient for synaptic vesicle recycling in vivo. When tested for ability to rescue lethality induced by heat-pulsing larvae during development, shi- promoter driven expression of individual isoforms conferred significant resistance to heat treatment during larval development. However, all 3 isoforms were unable to rescue the lethality of shi^12-12B mutants which are severely hypomorphic (or null) for shibire function. Taken together. these observations suggest that individual shibire isoforms have specific molecular activities in vivo.     

Droplet‐in‐Droplet Polymer Blend Microstructures: a Potential Route Toward the Recycling of Co‐mingled Plastics

The problem of recycling co‐mingled plastics is primarily related to the problem of multiple interfaces in multicomponent immiscible polymer blends. Here, we study a new concept where thermodynamically driven polymer segregation and phase encapsulation are used to locate multiple phases within one of two major phases. Starting from a co‐continuous blend of HDPE and PP, hierarchically encapsulated PS/PMMA/PC composite droplets are found to be exclusively located within PP when the principal HDPE/PP interface is compatibilized. The mechanical properties of the structures demonstrate an improved tensile strength and modulus as well as ductility under the appropriate processing conditions. This approach has potential as a novel route toward the recycling of co‐mingled plastics.     

The Influence of Different Recycling Scenarios on the Mechanical Design of an LED Weatherproof Light Fitting

This paper analyzes the high relevance of material selection for the sustainable development of an LED weatherproof light fitting. The research reveals how this choice modifies current and future end of life scenarios and can reduce the overall environmental impact. This life cycle assessment has been carried out with Ecotool, a software program especially developed for designers to assess the environmental performance of their designs at the same time that they are working on them. Results show that special attention can be put on the recycling and reusing of the product from the initial stages of development.