Insight towards Nucleation Mechanism and Change in Morphology for Nanostructured Platinum Thin Film Directly Grown on Carbon Substrate via Electrochemical Deposition

Nanocrystalline platinum with different morphologies is synthesized via electrochemical deposition technique. The nucleation mechanism and its structural effect over the electrodeposited Pt on carbon electrodes have been systematically studied. Powder X-ray diffraction, X-ray photoelectron spectroscopy, and field-emission scanning electron microscopy are employed to study nucleation, oxidation states, and Pt structure growth on a carbon electrode. This study reports significant development of Pt metal nanoparticles with different morphologies such as a sphere, flower, core-flower, and rod-like structure directly fabricated on carbon electrode while tuning the deposition parameters such as current density, time, temperature, pH during the deposition process. The proposed electrochemical route represents a superior fabrication procedure for large-scale electrode fabrication compared to a conventional method for preparing membrane electrode assemblies for fuel cell stacks.     

Endovascular deep brain stimulation: Investigating the relationship between vascular structures and deep brain stimulation targets

BackgroundEndovascular delivery of current using ‘stentrodes’ – electrode bearing stents – constitutes a potential alternative to conventional deep brain stimulation (DBS). The precise neuroanatomical relationships between DBS targets and the vascular system, however, are poorly characterized to date.ObjectiveTo establish the relationships between cerebrovascular system and DBS targets and investigate the feasibility of endovascular stimulation as an alternative to DBS.MethodsNeuroanatomical targets as employed during deep brain stimulation (anterior limb of the internal capsule, dentatorubrothalamic tract, fornix, globus pallidus pars interna, medial forebrain bundle, nucleus accumbens, pedunculopontine nucleus, subcallosal cingulate cortex, subthalamic nucleus, and ventral intermediate nucleus) were superimposed onto probabilistic vascular atlases obtained from 42 healthy individuals. Euclidian distances between targets and associated vessels were measured. To determine the electrical currents necessary to encapsulate the predefined neurosurgical targets and identify potentially side-effect inducing substrates, a preliminary volume of tissue activated (VTA) analysis was performed.ResultsSix out of ten DBS targets were deemed suitable for endovascular stimulation: medial forebrain bundle (vascular site: P1 segment of posterior cerebral artery), nucleus accumbens (vascular site: A1 segment of anterior cerebral artery), dentatorubrothalamic tract (vascular site: s2 segment of superior cerebellar artery), fornix (vascular site: internal cerebral vein), pedunculopontine nucleus (vascular site: lateral mesencephalic vein), and subcallosal cingulate cortex (vascular site: A2 segment of anterior cerebral artery). While VTAs effectively encapsulated mfb and NA at current thresholds of 3.5 V and 4.5 V respectively, incremental amplitude increases were required to effectively cover fornix, PPN and SCC target (mean voltage: 8.2 ± 4.8 V, range: 3.0–17.0 V). The side-effect profile associated with endovascular stimulation seems to be comparable to conventional lead implantation. Tailoring of targets towards vascular sites, however, may allow to reduce adverse effects, while maintaining the efficacy of neural entrainment within the target tissue.ConclusionsWhile several challenges remain at present, endovascular stimulation of select DBS targets seems feasible offering novel and exciting opportunities in the neuromodulation armamentarium.     

医用钛合金在三种不同生理电解液中的耐腐蚀行为研究

利用电化学方法研究医用钛合金在0.9%NaCl生理盐水，模拟人工唾液，模拟人工体液中的腐蚀情况，分析腐蚀电位和腐蚀电流密度，扫面电镜观察腐蚀表面形貌，CA-A型接触角测试仪测试钛合金表面被腐蚀后接触角的变化。实验表明：钛合金在三种生理电解液中的腐蚀情况依次是：模拟人工唾液〉模拟人工体液〉0.9%NaCl生理盐水。扫面电镜观察表明，医用钛合金在0.9% NaCl生理盐水腐蚀后，表面出现了许多腐蚀孔，经模拟人体体液腐蚀后，表面变得粗糙不平整，腐蚀孔数目变化不大，钛合金经人工唾液腐蚀后，腐蚀孔数目增多，部分腐蚀孔孔径明显增大。经三种生理电解液腐蚀后，钛合金表面接触角都减小。结论：医用钛合金在人工唾液中的腐蚀最严重，在临床应用中应给予相应的防范措施。     

Determination of serotonin and 5-hydroxyindoleacetic acid in guinea pig and human prostate using HPLC

The finding of significant numbers of endocrine-paracrine (EP) cells in the prostate glands of guinea pigs and man suggests that these cells may be important in the regulation or modulation of prostatic function. Serotonin is a biogenic amine common to most prostatic EP cells. In order to extend current knowledge relating to these cells, an assay was developed using high-performance liquid chromatography to quantitate serotonin and its metabolite 5-hydroxyindoleacetic acid (5-HIAA) in guinea pig and human prostatic tissue extracts. Levels of serotonin and 5-HIAA in the guinea pig whole-gland preparation were 105.4 +/- 70.6 ng/g and 48.4 +/- 95.7 ng/g, respectively. Normal human prostatic tissue contained 1423.9 +/- 750.8 ng/g serotonin and 66.7 +/- 92.8 ng/g 5-HIAA. Recoveries ranged between 60 and 100%. The detection limits were 24 pg/injection for serotonin and 12 pg/injection for 5-HIAA. This assay provides an expeditious, specific and highly sensitive method for the simultaneous determination of monoamines in guinea pig and human prostatic tissue.     

Dynamics of lipid adsorption at the electrified water∣1,2-dichloroethane interface

A recently introduced setup to measure the dynamic interfacial tension of expanding drops was used to compare the adsorption behaviour of a series of lipids at the electrified water∣dichloroethane interface. Phospholipids with saturated carbon chains of different length (DMPC, DPPC, DSPC, DAPC, DBPC), an unsaturated phospholipid (DOPC) and an ethanolamine (DSPE) were compared. It was found that the adsorption decreases with increasing chain length. Also, the increase of the flow rate reduces the degree of adsorption effectively. On the timescale of the experiments, the DSPE, DAPC and DBPC adsorption showed no potential dependence, whereas the adsorption of DOPC was stronger than that of the saturated lipids. Adsorption was modelled using the Langmuir adsorption isotherm; the potential dependence of adsorption is discussed.     

不同光凝接触镜填充液对中央角膜厚度的影响

目的　比较在行氩激光全视网膜光凝治疗中使用不同接触镜填充液对中央角膜厚度的影响 ,以寻找最适用于该治疗的填充液。方法　对 4 6例 (5 2眼 )患者进行氩激光全视网膜光凝治疗 ,每次分别随机使用 0 2 5 %氯霉素、1%羧甲基纤维素及医用透明质酸钠组作为安放全眼底激光角膜接触镜填充液 ,在治疗前及治疗后均用角膜测厚仪测量患者中央角膜厚度。结果　治疗后使用 0 2 5 %氯霉素组中央角膜平均增厚 (31 4± 10 2 ) μm ,1%羧甲基纤维素组中央角膜平均增厚 (10 6± 4 3) μm ,医用透明质酸钠组中央角膜平均增厚 (8 0± 3 5 ) μm。方差分析显示 :氯霉素组与另两组差异有极显著性意义 (P <0 0 1) ,羧甲基纤维素组与透明质酸钠组差异无显著性意义 (P >0 0 5 )。结论　 1%羧甲基纤维素及医用透明质酸钠作为安放全眼底激光角膜接触镜的填充液对角膜水肿程度的影响明显小于0 2 5 %氯霉素 ,是可供选用的优良填充液     

Man-Machine Interfaces in Computer Assisted Surgery

The clinical potential of computer assisted surgery (W) has been more and more widely acknowledged since CAS systems have been introduced into the operating room (OR) theater.

Especially the improvements in safety and accuracy are remarkable and strengthen the ties between surgeons and engineers. Tumor stereotaxis was introduced to neurological surgery in the early 1980s, and currently systems with and without robotic navigation are in use for specific medical indications. Recently, solutions for computer assisted orthopedic surgery were developed and applied to various anatomical regions. However, with the establishment of CAS in vivo, a new complex of problems, which was not present in the laboratory setup, was introduced: the man-machine interface.

Currently, the complexity of available CAS systems requires the presence of at least one system engineer (often called the “operator”) in the OR. As a consequence, there is no possibility for direct communication between the surgeon and the machine or software.

Most of the program steps involved in CAS and choices to be made intraoperatively have to be transferred to the software by means of communication of the surgeon with the operator. Particularly, the establishment of a relation between the virtual object (i.e., a medical image) and the surgical object (i.e., the patient), often denoted as “matching” or “skeletal registration” requires intensive interaction of the surgeon with the computer. A literature survey revealed that no CAS system in clinical use exists without a system engineer or a comparable person, and our clinical experience indicated that the matching process is a weak point in most systems. Because it appears to be contradictory to cost-reduction efforts in health care to have a highly paid specialist in the OR, this research evaluates strategies to facilitate the man-machine interface with the final goal of establishing a direct control of the system by the surgeon or the medical personnel traditionally present at surgery. Options to be investigated include 1) a CAS control panel (virtual keyboard) as an integrated component of the existing navigation system and 2) introduction of a commercial voice-recognition system. The implementation of these strategies into the existing CAS setup at the Department of Orthopaedic Surgery at the Inselspital (University of Bern) and clinical experience gained are reported     

外语多媒体软件界面设计的认知策略模式

外语学习软件界面的设计除了应注意实现软件功能的技术因素、表现媒体的物理性状以及信息内容的学科把握 ,还应对软件界面的内容组织方略、交互通达方式、语用认知功能等方面提出要求。界面设计的出发点 ,应该是学生、学习任务及其相应的学习活动。应该根据需求分析、学习者分析、任务和内容分析来确定目标和步骤。外语教学应以语言能力、交际能力、学习策略能力为目标 ,界面设计应以此为据选择表现媒体、结构层次、交互方式和技术手段。     

211例中晚期肺癌的临床疗效分析

本文总结了211例中晚期肺癌的临床治疗效果。按国际四级标准:1年内近期疗效,电化疗的CR、PR有效率为69.2%,中药组为52.5%,中西医结合组为85.3%,后者的疗效优于前两组,P<0.05;远期随访结果:上述三组的4年生存率分别为46.3%、40.0%、53.8%。临床分析表明,以中西医结合组的疗效为佳。