The Outcome of Cemented Acetabular Components in Total Hip Arthroplasty for Osteoarthritis Defines a Proficiency Threshold: Results of 22,956 Cases From the Australian Orthopaedic Association National Joint Replacement Registry

BackgroundThe declining popularity of cemented acetabular components is incongruous, given the published results of prostheses implanted using contemporary techniques. The outcome of arthroplasty has previously been demonstrated to correlate with surgeon experience and volume of practice. We aim to explore if surgeon volume alters outcomes of cemented acetabular components based on survivorship data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR).MethodsAn observational study was undertaken using a cohort of 22,956 patients with a primary diagnosis of osteoarthritis in the period 2003-2016 in whom cemented acetabular components were implanted. The cohort was stratified by age (greater than or less than 65 years) and annualized surgical volume of ≤10, >10-≤25, and >25 cases.ResultsStratified by age and volume, there was a protective benefit against revision conveyed at volume thresholds of 10 cases per annum and 25 cases per annum for patients ≥65 years of age and <65 years of age, respectively.ConclusionCemented total hip arthroplasty has excellent survivorship out to 15 years based on AOANJRR data. This survivorship is further improved if surgeons perform a higher volume of cases, with >25 cases conferring the greatest benefit. The AOANJRR data set is used to define best practice; surgeons who choose to utilize cemented acetabular fixation should be encouraged to perform this technique in adequate volumes to minimize revision risk and ensure the preservation of this important surgical skill set.     

携载rhBMP-2微球的新型可注射自凝固复合人工骨的制备及特性研究

[目的]制备一种具有良好降解性和成骨活性、可注射的自凝固新型骨修复材料。[方法]制备携载rhBMP-2的聚乳酸与聚乙醇酸共聚物（PLGA）微球，并将其与rhBMP-2／磷酸钙骨水泥（CPC）复合，制备出rhBMP-2／PLGA微球／CPC复合人工骨。探讨了材料的特性，包括形貌、固化时间、抗压强度及反映材料体外降解速度的指标一体外降解液Ca、P浓度变化，测定复合材料rhBMP乏的释药速度及体外诱导MSCs细胞成骨分化的能力。[结果]与单纯CPC-rhBMP-2相比，复合材料的固化时间少量增加，抗压强度下降明显。体外降解速度及体外释药明显提高，释放的rhBMP-2具有骨诱导活性。[结论]rhBMP-2／PLGA微球／磷酸钙骨水泥新型复合人工骨是具有良好应用前景的骨修复材料。     

骨水泥和种植体同期植入修复颌骨和牙列缺损的实验研究

目的：探讨高分子材料和种植体同期植入缺损区进行同步骨缺损修复和牙列缺损修复的可行性。方法：以4只杂种狗为研究对象，制备下颌骨长约2．5cm的缺损的动物模型(保留下颌骨下缘)，将骨水泥(聚甲基丙烯酸酯)植入骨缺损，同时将牙种植体植入骨水泥中并调整长轴方向，立即关闭术创。至术后3个月摄X线片，然后处死动物，局部巨检以了解骨水泥同骨组织的结合情况，并制备骨组织切片进行苏木精一伊红染色和甲苯胺蓝染色，以了解植入材料周边骨的生长情况及其对植入材料的反应。结果：术后3个月X线检查见骨缺损区充满骨水泥，骨水泥周边的骨小梁清晰，未见骨吸收或炎症表现，形成良好的骨-骨水泥界面，种植体则依赖其表面的螺纹结构与骨水泥间紧密的机械性嵌合而牢固的成为一体，植入的骨水泥块与周边天然骨结合紧密，无松动现象。植入材料周边局部脱钙骨的苏木精-伊红染色和甲苯胺蓝染色见骨结构正常，同时骨-骨水泥界有新骨形成。结论：骨水泥作为颌骨修复替代材料同期植入种植体是可行的。     

经皮椎体成形术中骨水泥对老年骨质疏松症患者凝血功能的影响

目的 观察经皮椎体成形术(PVP)中骨水泥对老年骨质疏松症患者凝血功能的影响.方法 于椎弓根穿刺前10 min、注入骨水泥后1、20 min、2 h分别抽血检测11例患者的凝血功能相关指标,包括血浆凝血酶原时间(PT)、活化的部分凝血酶原时间(APTT)、血浆纤维蛋白原(FIB)和鱼精蛋白副凝固实验(3P实验),并汇总数据进行统计学分析.结果 PVP中骨水泥注入后20 min,PT缩短、FIB增高、3P实验阳性率升高(P<0.05),骨水泥注入2 h后基本恢复至注入前水平.除1例患者PTA术后2 h稍高于正常值(126%),其余患者各个时间点的各项指标均在正常参考值范围内.结论 PVP术中注入骨水泥对于凝血功能正常的患者基本安全,但在注入后会产生一过性轻微的高凝倾向.     

松质骨螺钉骨水泥强化的生物力学和组织学研究

目的通过动物实验观察不同骨水泥强化松质骨螺钉的生物力学和组织学变化动态,为骨质疏松骨折患者内固定提供理论基础。方法在10只杂种犬胫骨近端制作松质骨螺钉植入的动物模型,分别采用碳酸化羟基磷灰石水泥(CHC)和聚甲基丙烯酸甲酯(PMMA)强化,分别于术后5d、4、8、12和16周处死动物,观察螺钉拔出的生物力学和组织学变化。结果CHC强化的螺钉拔出力随手术后时间的延长而逐渐升高,16周时达到(512.5 14.5)N,而PMMA强化组螺钉拔出力则随手术后时间的延长而逐渐降低。CHC-骨界面结合紧密,并且随时间延长出现CHC降解和骨长入,而PMMA-骨界面形成一层纤维组织。结论CHC强化能够提高松质骨螺钉植入体内的稳定性,并且随植入时间延长而逐渐升高。     

水泥型羟基磷灰石人工骨的制备及性能分析

Objective: To prepare hydroxyapatite cement (or calcium phosphate cement,CPC) and analyze its capability. Methods: Tetracalcium phospluge (TTCP ) was prepared by the method of high heat. TTCP reacted with in simulated body situation and produced CPC. Its capability was analyzed by scanning electron microscopy ( SEM), X-ray diffraction( XRD). Its density, absorbing water coefficient, macroporosity and compressive strength were measured also. Results: The main element of CPC is hydroxyapatile (HA), its microstructure comprised of petal crys-tals. The diameter of micropore was 4-10μm, density was 1. 922 g/cm^3, macroporosity was 29. 777%, absorbing coefficient was 15. 503%, compressive strength was 42.70 Mpa. Conclusion: This CPC has three-dimensional spatial structure, its strength meets the need of cancellous bone grafting.     

水泥型羟基磷灰石人工骨的制备及性能分析(英文)

目的:制备水泥型羟基磷灰石人工骨,并进行性能分析。方法:高温法制备出磷酸四钙,然后在模拟体内环境下将其与无水磷酸氢钙发生水化固化反应,合成水泥型羟基磷灰石人工骨,采用X线衍射、扫描电镜观察、体积密度、吸水率、孔隙率及耐压强度测量进行性能分析。结果:该人工骨主要成分为低结晶度的羟基磷灰石;微观结构呈针状或花瓣状晶体构成,微孔直径约4-10 μm,孔隙相互交通;平均体积密度为1.922 g·cm~(-3);平均吸水率为15.503％;孔隙率为29.777％;耐压强度为42.70 MPa。结论:本研究所制人工骨具有三维空间结构,力学性能符合人体非负重骨植骨要求。