MSCT在对比剂外渗的急性腹部创伤性动脉损伤诊断中的应用价值

目的探讨MSCT在对比剂外渗的急性腹部创伤性动脉损伤诊断中的应用价值。方法回顾性分析本院2016年1月～2018年12月收治的44例急性创伤性腹部动脉损伤患者及58例腹部非创伤性动脉病变患者影像资料,分析急性腹部创伤性和非创伤性动脉病变所致对比剂外渗的相关性。结果 44例创伤性腹部损伤患者通过MSCT及图像后处理技术共检出59支动脉损伤,其中对比剂外渗34支、非对比剂外渗共25支;58例急性腹部非创伤组共检出58支动脉病变,其中8支存在对比剂外渗。对比剂外渗征象创伤组出现率明显高于非创伤性组(χ~2=24.42,P0.05)。结论与非创伤组相比,急性腹部创伤性动脉损伤对比剂外渗征象较为常见,MSCT可以较好地显示创伤性对比剂外渗的直接及间接征象。     

Differentiating autoimmune pancreatitis from pancreatic ductal adenocarcinoma with CT radiomics features

PurposeThe purpose of this study was to determine whether computed tomography (CT)-based machine learning of radiomics features could help distinguish autoimmune pancreatitis (AIP) from pancreatic ductal adenocarcinoma (PDAC).Materials and MethodsEighty-nine patients with AIP (65 men, 24 women; mean age, 59.7 ± 13.9 [SD] years; range: 21–83 years) and 93 patients with PDAC (68 men, 25 women; mean age, 60.1 ± 12.3 [SD] years; range: 36–86 years) were retrospectively included. All patients had dedicated dual-phase pancreatic protocol CT between 2004 and 2018. Thin-slice images (0.75/0.5 mm thickness/increment) were compared with thick-slices images (3 or 5 mm thickness/increment). Pancreatic regions involved by PDAC or AIP (areas of enlargement, altered enhancement, effacement of pancreatic duct) as well as uninvolved parenchyma were segmented as three-dimensional volumes. Four hundred and thirty-one radiomics features were extracted and a random forest was used to distinguish AIP from PDAC. CT data of 60 AIP and 60 PDAC patients were used for training and those of 29 AIP and 33 PDAC independent patients were used for testing.ResultsThe pancreas was diffusely involved in 37 (37/89; 41.6%) patients with AIP and not diffusely in 52 (52/89; 58.4%) patients. Using machine learning, 95.2% (59/62; 95% confidence interval [CI]: 89.8–100%), 83.9% (52:67; 95% CI: 74.7–93.0%) and 77.4% (48/62; 95% CI: 67.0–87.8%) of the 62 test patients were correctly classified as either having PDAC or AIP with thin-slice venous phase, thin-slice arterial phase, and thick-slice venous phase CT, respectively. Three of the 29 patients with AIP (3/29; 10.3%) were incorrectly classified as having PDAC but all 33 patients with PDAC (33/33; 100%) were correctly classified with thin-slice venous phase with 89.7% sensitivity (26/29; 95% CI: 78.6–100%) and 100% specificity (33/33; 95% CI: 93–100%) for the diagnosis of AIP, 95.2% accuracy (59/62; 95% CI: 89.8–100%) and area under the curve of 0.975 (95% CI: 0.936–1.0).ConclusionsRadiomic features help differentiate AIP from PDAC with an overall accuracy of 95.2%.     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

Application of an augmented reality tool for maxillary positioning in orthognathic surgery – A feasibility study

BACKGROUND: An augmented reality tool for computer assisted surgery named X-Scope allows visual tracking of real anatomical structures in superposition with volume rendered CT or MRI scans and thus can be used for navigated translocation of bony segments. METHODS: In a feasibility study X-Scope was used in orthognathic surgery to control the translocation of the maxilla after Le Fort I osteotomy within a bimaxillary procedure. The situation achieved was compared with the pre-operative situation by means of cephalometric analysis on lateral and frontal cephalograms. RESULTS: The technique was successfully utilized in 5 patients. Maxillary positioning using X-Scope was accomplished accurately within a range of 1mm. The tool was used in all cases in addition to the usual intra-operative splints. A stand-alone application without conventional control does not yet seem reasonable. CONCLUSION: Augmented reality tools like X-Scope may be helpful for controlling maxillary translocation in orthognathic surgery. The application to other interventions in cranio-maxillofacial surgery such as Le Fort III osteotomy, fronto-orbital advancement, and cranial vault reshaping or repair may also be considered.     

Encouraging Underscreened Women to Have Cervical Cancer Screening: The Effectiveness of a Computer Strategy

Background.Computers that collect data from patients and provide both patients and practitioners with printed feedback on a range of health risks are a tool for assisting general practitioners with preventive care. This study assessed the impact of computer-generated printed feedback on cervical screening among women who were underscreened for cervical cancer.Method.Female attenders at two Australian general practices were randomly allocated to Experimental or Control groups. Women in both groups completed a health risk survey on a touch screen computer prior to their consultation. Those in the Experimental group received printed pages summarizing their results, including their eligibility for cervical screening and last Pap test, for themselves and their doctor. The number and proportion of underscreened women who had a Pap test in the 6 months after completing the computer survey, as determined by pathology records, were examined.Results.Of the 679 participants, 139 were classified as underscreened on the basis of self-report (74 Experimental, 65 Control) and 272 on the basis of their pathology records (148 Experimental, 124 Control). Overall about one-third of women had a test in the 6-month period, and the differences between the groups were not significant for women overall (18–70 years) or for women 18–49 years. Among women 50–70 who were underscreened based on self-report, those receiving the printout were more likely to have a Pap test in the next 6 months (P< 0.05). This pattern was also evident, but did not reach statistical significance, for older women who were underscreened based on pathology records.Conclusions.We are unable to draw conclusions regarding the effectiveness of the computer system due to the modest proportions of women screened, the small numbers, and the fact that the computer survey may have created an intervention effect in the Control group. As the study suggests the computer system is acceptable to women and may be effective for encouraging screening among older women, further exploration of the system is desirable.     

先天性髋脱位骨刀模型的研究

目的：在建立先天性髋脱位（CDH）的计算机三维交互模型的基础上，建立三维骨刀模型，模拟截骨。方法：利用螺旋体积CT获得患儿髋关节扫描数据，用B＋树组织按marching cubes方法完成骨刀模型的重建。通过对B＋树的不完全遍历和回溯，定位表面模型间的交点并分割髋关节模型。结果：重建的骨刀模型与CDH三维模型之间，可进行实时交互。初步实现了对骨性三维交互模型任意位置的平面切割、球面切割、拾取和拼合。结论：此建模、切割方法可行有效，可用于计算机模拟骨性手术的研究。     

Cortical circumferential profile of SPECT cerebral perfusion in Alzheimer''s disease

We developed a semiautomatic method termed “cortical circumferential profiling” for objective analysis of cerebral cortex function in emission tomographic neuroimaging studies. This method treats cortex as a continuous ring near the outer brain edge. A computer algorithm samples the cortex at 60 contiguous, equiangular locations, using 1-cm² samples. These values are plotted as a function of cortical angle to produce the cortical circumferential profile. This method was used in a study of regional cerebral perfusion in 15 patients with Alzheimer's disease and 8 elderly control subjects using N-isopropyl [I-123]-iodoamphetamine. Cortical circumferential profiling decreases variability, examines the entire cortex within slices at preselected levels above the orbital-meatal line, and facilitates intrasubject and intersubject comparisons.     

现代计算机技术在户外广告中的应用

针对目前我国户外广告发展状况,简述了计算机技术在户外广告设计、规划中的应用及其影响。