生物活性材料义眼台

由于病变和外伤等原因，使一些人眼球摘除，留下外现缺陷。医学上使用义眼台植入眼眶，在上面按装义眼以矫治外形。从前使用的义眼台用玻璃球或硅橡胶制作，使用中均有种类不同的缺点，即无生物活性、密度大等。医学界希望有新型医用材料临床应用。采用液态化学方法合成羟基磷灰石，使羟基磷灰石和微晶玻璃混匀，制成生物活性材料。生物材料和粘结剂、造孔剂，辅助剂一同制成生坯，以适当的温度焙烧成多孔结构义眼台。对材料进行了动物实验与临床应用。动物实验表明，材料具有优异的生物相容性和一定的生物活性。临床应用效果良好。本材料是制备义眼台的新材料。本文就材料研究、动物实验、义眼台的生产工艺进行了探讨。     

Evaluation of Class I ART restorations in Brazilian schoolchildren: three-year results

Atraumetic Restorative Treatment (ART) has been adopted around the world to avoid unnecessary extractions, especially in non-industrialized countries The development of specific glass ionomer cements marketed for the ART technique has contributed to the technical success rate. In this study. Ketac-Molar^a (3M ESPE. Dental Medzn Germany) was used to restore 150 Class I cavities in 118 Brazilian public school children, aged from 7–12 years. At baseline and at subsequent recalls. CPI probes with a ball-end of 0.5 millimeters (mm) were used to assess loss of restorative material, and photographic color transparencies of restorations were made. After six months. 83 patients returned for follow-up examinations, with 71.8% of their restorations designated as acceptable. After three years. 49 patients with 57 ART-restorations were evaluated, with 21.0% of these restorations graded as acceptable Another 29.8% of their restorations had been replaced by more permanent materials. The main objective of the ART technique is tooth retention; this was achieved for 94.7% of the restored teeth in a high caries risk population who returned for recalls.     

构建玻片蛋白质芯片的实验研究

目的:探讨玻片蛋白质芯片的构建方法及其中间操作条件的选择与优化。方法:利用生物芯片点样仪将超微量蛋白质点到经特殊处理的玻璃片表面,然后选用不同的化学试剂对玻片背景进行封闭;再用荧光素标记的蛋白质与点样蛋白杂交;最后用生物芯片分析仪扫描成像并进行分析,比较不同条件下芯片的显示效果。结果:蛋白质样品与片基稳定结合,并保持原活性状态;封闭试剂选用酪蛋白或明胶效果较佳;点样探针与其特异蛋白质抗体可稳定结合,结合效果与点样蛋白浓度在一定范围内呈正相关;在1.6 cm×1.6 cm的玻璃片面积上,构建了36×36=1269点的蛋白质芯片。结论:本实验条件下,蛋白质抗原或抗体可以稳定地固定于经过处理的玻璃片表面.制成免疫型蛋白芯片,并可通过随后的抗原抗体反应与荧光素标记的相应抗体或抗原结合,用生物芯片分析仪可对其荧光信号进行检测分析。     

玻璃纤维增强复合树脂在总义齿基托中的应用

目的：增强总义齿基托的机械性能，提高总义齿的基托抗折裂能力。方法：对E－玻璃纤维用KH－550处理剂进行表面处理后，加入总义齿基托中，制成玻璃纤维增强复合树脂。结果：经过1年的临床观察后复诊，没有发现裂纹。结论：玻璃纤维增强得合树脂可以有效地增强总义齿基托的机械性能。     

玻璃熔窑蜂窝状窑顶的节能机理及效果

根据窑顶辐射率，内表面积和角系数的变化，窑顶，胸墙和玻璃液面温度的改变，以及火焰－窑顶－胸墙－玻璃液面四者之间的辐射热交换，阐明了熔窑蜂状窑顶的节能机理。用计算机通过实例计算，定量表明了蜂窝状窑顶的节能效果。     

口腔修复陶瓷材料的磨损性能北大核心

背景:陶瓷材料因具有优良的机械性能、与口腔组织良好的生物相容性及高度美观性广泛应用于口腔修复领域,良好的磨损性能对修复体临床应用有重要意义。目的:综述口腔修复陶瓷材料磨损性能机制及临床研究,以期为临床选择适宜的陶瓷材料提供思路。方法:应用计算机在PubMed和Web of Science数据库检索在2016年1月至2021年4月期间涉及口腔修复陶瓷材料磨损性能的相关研究。英文检索词为“dental ceramic material,wear property”,最终共纳入36篇文献进行分析。结果与结论:①全瓷材料自身耐磨性均高于树脂陶瓷复合材料,全瓷材料中氧化锆陶瓷磨损性能最佳,美学性能较弱。②玻璃陶瓷中氧化锆加强型硅酸锂玻璃陶瓷磨损性能较好,但应用时间较短,长期疗效还有待更多的研究证实。③树脂陶瓷复合材料中树脂纳米陶瓷材料磨损性能优于聚合物渗透陶瓷。④在后牙区全冠修复可选择氧化锆陶瓷,前牙区全冠修复可以根据患者的美学需求选择高透性氧化锆陶瓷或玻璃陶瓷。⑤贴面、嵌体和高嵌体修复可选择长石瓷、玻璃陶瓷和树脂陶瓷复合材料,但树脂陶瓷复合材料耐磨性差,需避免用于高应力承载区。⑥对牙本质暴露、氟斑牙和牙齿酸蚀症患者可考虑树脂纳米陶瓷材料,但这类患者适宜的陶瓷材料相关研究较少。⑦表面粗糙度对陶瓷材料的磨损性能有显著影响,临床口腔修复应用中采用良好的抛光表面可提高陶瓷材料磨损性能,而且对修复体进行定期复查也至关重要。     

Structural Reasons for Restricted Backbone Motion in Poly(n‐alkyl methacrylates): Degree of Polymerization,Tacticity and Side‐Chain Length

Summary: The complex dynamics of poly(n‐alkyl methacrylates) is studied by advanced ¹³C NMR spectroscopy as well as mechanical and dielectric relaxation. Extended backbone conformations are identified as the molecular units involved in structural relaxation. From the variation in the degree of polymerization and a comparison with the presence of stereoregular sequences in the sample, the length of the extended units is determined to involve about five, at most ten monomeric units. Syndiotactic and isotactic sequences behave similarly. These findings are indicative of locally structured polymer melts.

     

可切削渗透陶瓷玻璃料对不同堆积密度氧化铝基体的渗透

探讨了可切削渗透陶瓷 (Infiltration of Machinable- infiltrated- ceramic,MIC)渗透玻璃在不同堆积密度氧化铝基体中的渗透情况及渗透后复合体的颜色表达。在 110 0℃保温 2 h,将玻璃渗透到不同堆积密度的氧化铝基体中 ,分别测得其渗透深度和颜色参数。扫描电镜观察玻璃—氧化铝复合体断面。玻璃渗透深度的平方与氧化铝堆积密度有直线负相关关系 ,最小渗透深度为 3.0 92 m m。复合体的颜色系数与氧化铝堆积密度无相关性。渗透复合体在断裂过程中可见 :裂纹偏转、晶体拔出和穿晶断裂。本实验证实 MIC渗透玻璃的渗透性能达到临床要求。渗透后的复合体颜色稳定 ,强度可靠     

Effect of iron on the surface, degradation and ion release properties of phosphate-based glass fibres

Phosphate-based glass fibres (PGF) have the unique characteristic of being completely soluble in an aqueous environment, releasing bioactive and biocompatible ions. They have been proposed as tissue engineering scaffolds for craniofacial skeletal muscle regeneration, where myoblasts are seeded directly onto the fibres. Studies have shown that these cells have a preference in their initial attachment to fibres of certain composition and size, which in turn control the rate of degradation. This study investigated the relationship between the surface properties, degradation properties and ion release (cationic and anionic species) by altering the chemical composition of the PGF. Iron oxide (Fe2O3) was incorporated into glasses containing P2O5 (50 mol%), CaO (30 mol%) and Na2O (20 mol%). Six glass compositions with Fe2O3 ranging from 0 to 5 mol% by replacing the equivalent Na2O mol% were investigated. Contact angle measurements showed that polar interactions occurring on the glass surfaces diminished with increasing Fe2O3 content. This behaviour was reflected in the estimated surface energies of the glasses, where the overall surface energy decreased with increasing Fe2O3 content due to the decrease in polar or acid/base component. The incorporation of up to 5 mol% Fe2O3 into PGF resulted in a significant reduction in the degradation rate (by two orders of magnitude), which can be related to the formation of more hydration resistant P-O-Fe bonds. However, the degradation rate increased with decreasing fibre diameter (comparing average diameters of 31.6 +/- 6.5 microm versus 13.1 +/- 1.3 microm) for a given mass of fibre, and this is related to the surface area to volume ratio. Taken together the results suggest that fibres with the larger diameters and containing 3-5 mol% Fe2O3 could initially be a more durable scaffold than ones with 1 or 2 mol% Fe2O3 for initial cell attachment.