咀嚼槟榔习惯与牙体磨损关系的临床研究

目的 :探讨长期咀嚼槟榔与牙体磨损的关系。方法 :对长期咀嚼槟榔的 6 4例患者的咀嚼槟榔时间、频率及其牙体牙合面磨损、曲面体层片进行分析。结果 :所有患者后牙牙合面出现不同程度的磨损 ,且咀嚼槟榔时间越长 ,牙合面磨损越严重 (P <0 .0 1) ;咀嚼频率越高 ,牙合面磨损加重 (P <0 .0 1) ,磨损严重者可伴根尖周炎症及牙槽骨不同程度吸收。结论 :长期咀嚼槟榔可导致牙体牙合面不同程度磨损。     

湿性皮肤再生技术在皮肤擦伤的应用

目的:探导湿性皮肤再生技术治疗皮肤擦伤的疗效。方法:自2000年1月-2005年10月,治疗头面部、躯干和四肢急性皮肤擦伤共353例,其中采用湿润烧伤膏和暴露疗法治疗(新法组)185例,按传统疗法清创治疗(传统组)168例。结果:新法组7天内痊愈116例,占62．7％;14天内痊愈59例,占3713％;总有效率100％。传统组7天内痊愈82例,占48．8％;14天内痊愈58例,占34．5％;另外28例,占16．7％,发生不同程度的创面感染,痂下积脓,需作再次清创,碘伏湿敷或改用MEBO治疗,创面延期愈合,愈后瘢痕增生明显。结论:湿润烧伤膏和暴露疗法治疗皮肤擦伤与传统疗法比较,具有缩短创面愈合时间,愈后不留瘢痕等优点。     

用氟离子选择电极测定牙膏游离氟

用氟离子选择电极测定牙膏中的氟含量，本法测定回收率为９８．６３％～１０４．００％，变异系数为３．８３％。     

Ocular complications of severe corneal abrasions after cosmetic blepharopigmentation

A 53-year-old woman with hemiparesis and poor dexterity, underwent cosmetic blepharopigmentation on the both upper eyelids in the dermatology clinic of a private hospital. She was not asked for any information on her medical history and no informed consent was obtained and the procedure was performed without any protective ocular shields. The patient experienced severe lacrimation, discomfort, and increased sensitivity to light during and after the procedure. She also noticed blurred vision after the procedure. Ophthalmologic examination revealed tender and oedematous eyelids and corneal abrasions in both of her eyes. Topical antibiotics and preservative-free lubricants were able to recover her from her signs and symptoms at 1-week follow-up. It is recommended that cosmetic blepharopigmentation should be applied cautiously with patient’s informed consent after obtaining a thorough medical history and with protective ocular shields to avoid potential complications.     

Sculpting of an erodible body by flowing water

Erosion by flowing fluids carves striking landforms on Earth and also provides important clues to the past and present environments of other worlds. In these processes, solid boundaries both influence and are shaped by the surrounding fluid, but the emergence of morphology as a result of this interaction is not well understood. We study the coevolution of shape and flow in the context of erodible bodies molded from clay and immersed in a fast, unidirectional water flow. Although commonly viewed as a smoothing process, we find that erosion sculpts pointed and cornerlike features that persist as the solid shrinks. We explain these observations using flow visualization and a fluid mechanical model in which the surface shear stress dictates the rate of material removal. Experiments and simulations show that this interaction ultimately leads to self-similarly receding boundaries and a unique front surface characterized by nearly uniform shear stress. This tendency toward conformity of stress offers a principle for understanding erosion in more complex geometries and flows, such as those present in nature.     

力因素引起楔状缺损的研究进展

楔状缺损是一种常见的牙体硬组织非龋性疾病,刷牙、酸的作用、牙颈部结构及力作用是其常见的病因。近20年来,临床研究中根据该病的一些特殊表现,研究了力对楔状缺损形成的影响,本文就引起楔状缺损的力因素这个病因作一综述。     

Comparison of Properties of Hardfaced Layers Made by a Metal-Core-Covered Tubular Electrode with a Special Chemical Composition

In this article, the results of research on the metal-mineral-type abrasive wear of a wear-resistant plate made by a tubular electrode with a metallic core and an innovative chemical composition using the manual metal arc hardfacing process were presented. The properties of the new layer were compared to the results of eleven wear plates manufactured by global suppliers, including flux-cored arc welding gas-shielded (FCAW-GS, Deposition Process Reference Number: 138), flux-cored arc welding self-shielded (FCAW-SS, Deposition Process Reference Number: 114), automated hardfacing, and manual metal arc welding (MMAW, Deposition Process Reference Number: 111) hardfacing T Fe15 and T Fe16 alloys, according to EN 14700:2014. Characterization of the hardfaced layers was achieved by using hardness tests, optical microscopy, confocal microscopy, scanning electron microscopy, and EDS (Energy Dispersive Spectroscopy) and X-ray diffraction analyses. Based on wear resistance tests in laboratory conditions, in accordance with ASTM G65-00: Procedure A, and surface layer hardness tests, in accordance with PN-EN ISO 6508-1, the wear plates most suitable for use in metal-mineral conditions were chosen. The results demonstrated the high metal-mineral abrasive wear resistance of the deposit weld metal produced by the new covered tubular electrode. The tubular electrode demonstrated a high linear correlation between the surface wear resistance and the hardness of the metal matrix of the tested abrasive wear plates. In addition to hardness, size, shape, the dispersion of strengthening phases, and the base metal content, depending on hardfacing technology and technological parameters, impact wear resistance is represented by volumetric loss caused by effect-free or constrained dry abrasive medium contact. The presented results can be used in machine part material selection and wear planning for applications in inspection, conservation, and regeneration interval determination. The obtained results will be applied in a real-time wear rate prediction system based on the measurement of the working parameters.     

Effect of air-abrasion pre-treatment with bioactive glass 45S5 on enamel surface loss after erosion/abrasion challenge

ObjectivesThe aim of this in vitro study was to evaluate the effect of air-abrasion surface pre-treatment with bioactive glass (BAG) 45S5 on enamel surface loss after erosion/abrasion challenge.MethodsTwenty-four sound bovine incisors were used for this study. Four experimental groups (n = 12) were assigned as follows: Group 1 was the negative control group, Group 2 specimens were treated with a SnF₂ gel (positive control group), Group 3 specimens were air-abraded with BAG 45S5 (ProSylc) and Group 4 received both treatments. The specimens were submitted to erosion/abrasion challenge using a common soft drink. Enamel surface loss was evaluated using an optical profilometer. Additionally, surface roughness (VSI method) and surface microhardness (Vickers method) changes were evaluated, as well as SEM and EDS analyses were performed on enamel surface. The data were statistically analyzed using one-way ANOVA and Tukey’s post-hoc test at a level of significance a = 0.05.ResultsSurface pre-treatment with BAG 45S5 reduced surface loss in comparison with negative control group (p < 0.001), which exhibited the highest surface loss of the experimental groups (p < 0.05). The positive control group (SnF₂ treatment) and Group 4 specimens, which received both air-abrasion pre-treatment and SnF₂ treatment, presented the lowest surface loss (p < 0.05), but did not show significant differences to each other (p = 0.65).SignificanceAir-abrasion pre-treatment with BAG 45S5 may be beneficial as an in-office preventive method for the limitation of enamel erosive wear induced by excessive consumption of soft drinks. The clinical significance of the results regarding this preventive method should be confirmed by clinical studies.     

Effect of NaF and TiF4 varnish and solution on bovine dentin erosion plus abrasion in vitro

Abstract

Objectives. This in vitro study aimed to analyze the effect of TiF₄ compared to NaF varnishes and solutions, to protect against dentin erosion associated with abrasion. Materials and methods. Bovine dentin specimens were pre-treated with NaF-Duraphat (2.26% F), NaF/CaF₂-Duofluorid (5.63% F), experimental-NaF (2.45% F), experimental-TiF₄ (2.45% F) and placebo varnishes; NaF (2.26% F) and TiF₄ (2.45% F) solutions. Controls remained untreated. The erosive pH cycling was performed using a soft drink (pH 2.6) 4 × 90 s/day and the toothbrushing-abrasion 2 × 10 s/day, in vitro for 5 days. Between the challenges, the specimens were exposed to artificial saliva. Dentin tissue loss was measured profilometrically (μm). Results. ANOVA/Tukey's test showed that all fluoridated varnishes (Duraphat, 7.5 ± 1.1; Duofluorid, 6.8 ± 1.1; NaF, 7.2 ± 1.9; TiF₄, 6.5 ± 1.0) were able to significantly reduce dentin tissue loss (40.7% reduction compared to control) when compared to placebo varnish (11.2 ± 1.3), control (11.8 ± 1.7) and fluoridated (NaF, 9.9 ± 1.8; TiF₄, 10.3 ± 2.1) solutions (p < 0.0001), which in turn did not significantly differ from each other. Conclusion. All fluoridated varnishes, but not the solutions, had a similar performance and a good potential to reduce dentin tissue loss under mild erosive and abrasive conditions in vitro. Risk patients for erosion and abrasion, especially those with exposed dentin, should benefit from this clinical preventive measure. Further research has to confirm this promising result in the clinical situation.